October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.

Difference between revisions of "Cab-Lab"

From Fractal Audio Wiki
Jump to navigation Jump to search
 
(341 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[image:Cab-Lab.PNG‎|link=]]
+
__TOC__
  
==Cab-Lab==
+
=About Cab-Lab=
* Cab-Lab is an IR mixing and tools utility for the Axe-Fx, by Fractal Audio.
 
* [http://shop.fractalaudio.com/Cab_Lab_Axe_Fx_II_IR_Mixer_p/ddl-003.htm Available for purchase here].
 
  
==Cab-Lab: product information==
+
Fractal Audio's Cab-Lab is a mixer and toolkit for [[Impulse_responses_(IR)|IRs (Impulse Responses)]].
* Create new cab sounds for your Axe-Fx II by mixing up to eight User Cab Impulse Response ("IR") files with Cab-Lab.
 
* The Axe-Fx II Cab Simulator uses Impulse Response (“IR”) technology to reproduce the tone of a real speaker, including the microphone(s) used to capture it. With over 100 onboard “Factory” cabs representing the most popular speaker types, the unit has tremendous sonic potential right out of the box. An additional 100 “User” Cab memory slots allow you to load your own IRs, effectively giving the Axe-Fx II a limitless range of cab tones. The built-in ability of the Axe-Fx II to capture IRs—including Tone Matches—plus the release of “Cab IR Packs” from Fractal Audio Systems and 3rd party companies like OwnHammer and RedWirez, has helped to propel user cabs to the forefront of guitar tone conversations everywhere, with IR Mixing taking center stage. Just as an artist, producer or engineer would create a guitar tone using a blend of signal from multiple microphones on one or more speakers, some of the best available cabinet IRs are mixes of IRs captured from different sound sources. Individual speaker mic IRs for the Axe-Fx II have been available for years, but you’ve been limited in ways to mix these “in the box.”
 
* Now, Cab-Lab allows you to combine up to eight IRs in the same way a studio mixer allows you to combine the parallel signals from multiple microphones on a guitar speaker cab. You might blend the big tone of a ribbon on the cone with some sizzle from a close condenser and bring in a bit of large diaphragm for color, or combine the different colors of two favorite 4x12 cabinets in to a single, new hybrid cabinet IR. You just load the individual IRs, set levels using faders, audition the result, and save it to the Axe-Fx II or your computer when you’ve found your sound.
 
* Cab-Lab is easy to use and connects directly to your Axe-Fx II via USB. All results can be sent to the Scratch Pad for auditioning, saved more permanently to one of the 100 User Cab memory slots, or saved as a SysEx file on your computer. Cab-Lab processes IRs in full 2048 sample “high” resolution.
 
* The program can even combine IRs in series, allowing you, for example, to “print” the sound of a Tone Match IR onto a Cab IR so the Tone Matching block can be removed from the grid to save CPU power.
 
  
==Cab-Lab: connecting==
+
<blockquote>
* Connect Cab-Lab to the Axe-Fx II to be able to send IRs and mixed IRs to the Axe-Fx. You need to install USB drivers first ([[USB connectivity]]).
+
'''FRACTAL AUDIO QUOTES'''
 +
<hr>
  
==Cab-Lab: UltraRes IR==
+
<blockquote>
* To mix UltraRes IRs, you need the .IR version of an IR. See [[UltraRes]].
+
In the world of Fractal Audio’s industry-leading amp modeling, many musicians recognize the importance of Impulse Responses (<q>IRs</q>). IRs can be thought of as sonic <q>captures</q> – essentially the <q>frequency fingerprint</q> of a tone over time. Fractal Audio was the first to allow installable IRs in a guitar product to recreate the sound of a mic’d speaker cabinet, setting a new industry standard. Suddenly, guitarists could encapsulate the essence of a speaker cab in a portable format, enhancing both studio recording and live performance. Now, Cab-Lab 4 with DynaCab makes it quicker, easier, more intuitive, and fun to achieve great tone, allowing you to customize and mix IRs yourself.
  
==Cab-Lab: user forum==
+
For decades, guitarists and audio pros have carefully selected, positioned, and mixed microphones on guitar speakers in the pursuit of great tone. Now you can do the same, and it is easier than ever before. With Cab-Lab 4, you get a 4-channel IR mixer, plus tools to EQ, align, and more, so you can select, position, and mix mics while listening in real-time. Meanwhile, new DynaCab technology makes tone sculpting easier than ever, eliminating the need to sift through countless individual IRs. In fact, the DynaCab system in Cab-Lab 4 offers even more resolution and flexibility than our hardware products, with 360° of placement at variable distances, the possibility of additional microphone choices, and more. Best of all, Cab-Lab is now FREE!
* [http://forum.fractalaudio.com/axe-fx-ii/axe-fx-ii-user-cabs-irs Visit the User Cabs and IRs forum.]
 
  
[[category:Software]]
+
Cab-Lab 4 supports our latest DynaCab Packs, as well as traditional single IRs — whether from Fractal Audio legacy cab packs or 3rd party producers. Cab-Lab gives you the tools you need to create your own signature tones—delivering the  high quality results you have come to expect from Fractal Audio Systems.
[[category:About the Axe-Fx II]]
+
 
[[category:Presets and effects]]
+
Cab-Lab 4 comes with both Standalone and Plugin Versions. The Standalone uses your Axe-Fx III, FM9, FM3, or another audio interface so you can monitor in realtime. Meanwhile, the plugin version processes audio in your compatible DAW or host and can be used both to <q>re-cab</q> raw amp recordings and export IRs for your Fractal Audio hardware product.
[[category:Connecting]]
+
</blockquote>
 +
</blockquote>
 +
 
 +
You can download Cab-Lab from its [http://www.fractalaudio.com/cab-lab-3 product page].
 +
 
 +
See the [[Owners_Manuals|manual]] for more information.
 +
 
 +
=Features=
 +
 
 +
Features of Cab-Lab 4:
 +
 
 +
* 4-Channel IR Mixer with per-channel level, EQ, mute, solo, and phase controls.
 +
* Each channel can be set to DynaCab or Single IR.
 +
* Single IR mode supports .wav, .ir, and non UltraRes .syx files.
 +
* DynaCab mode offers easy, intuitive, visual mic-on-speaker positioning with 360° center-to-edge mic placement, and adjustable mic distance.
 +
* DynaCab mode supports new DynaCab Packs, available from Fractal Audio's [https://shop.fractalaudio.com/software-and-irs/dynacab-packs/ DynaCab Packs store].
 +
* Global and per-channel EQ with selectable-slope Low Cut and High Cut filters and frequency plots.
 +
* <q>ZOOM</q> view allows precise mic positioning using real-world centimeter (cm) or inch (in) units.
 +
* <q>ALIGN</q> view allows you to adjust IR time for precise phase control. DynaCabs are automatically aligned at any mic distance but can be adjusted further.
 +
* Built in Cab Pack Manager automatically handles DynaCab pack downloads, installation, and authorization.
 +
* Cab-Lab 4 Standalone connects directly to Axe-Fx III, FM9, and FM3 or any compatible audio interface for real time monitoring in <q>Software Live Mode</q>.
 +
* Standalone mode can send mix IRs directly to User Cab memories of the connected FAS device.
 +
* <q>Hardware Manual</q> audition mode sends your mix IR to <q>Scratchpad 1</q> on a connected Fractal Audio device.
 +
* Audition setup uses easy <q>DO IT!</q> wizards.
 +
* Cab-Lab 4 Plugin runs in a DAW or host to <q>re-cab</q> life or recorded amp tracks. Cab-Lab 4 is an excellent way to re-cab plugins or a tube amp using the Fractal-Audio X-Load LB-2 Load box.
 +
* IR Capture Utility facilitates the creation of individual IRs using an Axe-Fx III.
 +
* Cab-Lab saves Sessions for total recall any time you re-launch the program.
 +
* Wav Conversion utility batch converts .wav IRs to .ir and .syx formats.
 +
* IR2Syx utility batch converts .ir to .syx.
 +
* IR Phase Invert utility batch corrects inverted IRs, such as those created when a speaker is wired backwards.
 +
* RefIR Batch utility applies a reference IR to remove coloration imparted by a power amp.
 +
* Rename IR utility renames a single IR.
 +
* Copy Filename to IR name batch utility allows changing the internal IR name of multiple files.
 +
* Cab-Lab 4 Standalone is self-updating when new versions are released.
 +
* New and improved <q>dark mode</q> look and feel.
 +
 
 +
=Standalone and plugin versions=
 +
 
 +
Cab-Lab 4 has two versions:
 +
 
 +
; Standalone : The standalone app operates independently without needing another software platform, while the plugin requires a host application or DAW such as Logic, Reaper, Live, etc. The Standalone uses your Axe-Fx III, FM9, FM3 or any compatible audio interface for <q>Software Live Mode</q> auditioning. A wizard helps you to set up an <q>amp modeling only</q> preset, allowing Cab-Lab to perform speaker cab simulation while you monitor, mix and adjust it in real time. When you’re happy with the result, you can save it as a file to your computer or directly to a connected Fractal Audio device. The standalone also includes a collection of powerful ir processing tools.
 +
 
 +
; Plugin : The plugin is tailored for <q>re-cab</q> applications in a DAW using any audio interface to mix and monitor in real-time. This allows you to mix and monitor in real time. It doesn’t connect to Fractal Audio hardware directly, but it offers the capability to export an IR to your computer. You can then upload this IR to any compatible Fractal Audio device later. The plugin for Macs requires 64-bit AU- or VST3 capable host software. The plugin for Windows requires 64- or 32-bit VST3 capable host software.
 +
 
 +
=Audition modes=
 +
 
 +
==SW Live Mode (Software Live Mode)==
 +
 
 +
Software Live Mode, in the standalone version, allows you to hear mic and mix changes in real time, replicating how this process works on analog gear. It relies on a signal with amp modeling but no cab processing. A wizard helps you to set up your Axe-Fx III, FM9, or FM3 for this purpose.
 +
 
 +
==HW Manual Audition (Hardware Manual Audition)==
 +
 
 +
This mode allows sending IRs manually to the <q>scratch pad</q> of a connected Axe-Fx III, FM9, or FM3.
 +
 
 +
=Managing IRs=
 +
 
 +
==IR Capture==
 +
 
 +
Cab-Lab also provides a software GUI for [[IR Capture]], Fractal Audio's tool that lets you capture IRs with an Axe-Fx II or Axe-Fx III.
 +
 
 +
[[image:IR Capture.png|300px]]
 +
 
 +
==Cab Pack Manager==
 +
 
 +
Use the built-in Cab Pack Manager to download, install, and authorize DynaCab packs purchased from [https://shop.fractalaudio.com Fractal Audio's online store].
 +
 
 +
==Min Phase and Auto Trim==
 +
 
 +
See <q>[[Impulse_responses_(IR)#IR_properties|Minimum Phase and Auto Trim]]</q> for information.
 +
 
 +
==UltraRes IRs==
 +
 
 +
To mix [[Impulse_responses_(IR)#IR_resolution|UltraRes]] impulse responses in Cab-Lab, you need the <samp>.ir</samp> version of an impulse response. This is Fractal Audio's proprietary format, targeted at mixing impulse responses. Or you can use use a <samp>.wav</samp> file.
 +
 
 +
The underlying IRs in Fractal Audio's commercial DynaCab packs are UltraRes.
 +
 
 +
Stock cabs can't be mixed, unless you create <samp>.ir</samp> files by using IR Capture. <q>[https://forum.fractalaudio.com/threads/that-cab-block-i-need-help.163445/post-1959748 That Cab block. I need help.]</q> in the forum explains how to do it.
 +
 
 +
==FullRes IRs==
 +
 
 +
Cab-Lab supports [[Impulse_responses_(IR)#IR_resolution|FullRes]] IR capturing and management.
 +
 
 +
==Convert Wave, SYX and IR files==
 +
 
 +
Creators of impulse responses often provide Wave files (<samp>.wav</samp>). These need to be converted to Fractal Audio's SYX (<samp>.syx</samp>) format to be able to be used in Fractal Audio's amp modelers. Cab-Lab provides a batch conversion routine. The Manage Cabs tool in the editors can also convert Wave files on the fly.
 +
 
 +
==Rename IRs==
 +
 
 +
Cab-Lab can rename the internal name of impulse responses. It can also rename impulse responses to match their filenames.
 +
 
 +
=Tips, tricks and troubleshooting=
 +
 
 +
==Using Cab-Lab with a traditional amplifier==
 +
 
 +
See <q>[[X-Load Reactive Load LB-2]]</q> for more information.
 +
 
 +
<blockquote>
 +
'''FRACTAL AUDIO QUOTES'''
 +
<hr>
 +
 
 +
<blockquote>
 +
[http://forum.fractalaudio.com/threads/cab-lab-with-a-tube-head.103083/#post-1234969] Load your head with a load box, take the output of the load box into your computer and run the audio through Cab-Lab. I would recommend a reactive load box rather than a resistive one.
 +
</blockquote>
 +
</blockquote>
 +
 
 +
==Fix no audio in Software Live Mode under Mac OS==
 +
 
 +
[https://support.fractalaudio.com/en-US/fix-no-audio-in-cab-lab-4-software-live-mode-under-mac-os-356462 Read this]
 +
 
 +
=Videos=
 +
 
 +
[[video:Leon-Cab-Lab4]]
 +
[[video:Coop-CabLab4]]
 +
[[video:RoshCabLab4]]
 +
 
 +
[[category:Axe-Fx2]]
 +
[[category:Axe-Fx3]]
 +
[[category:FM3]]
 +
[[category:FM9]]
 +
[[category:AX8]]
 +
[[category:Sounds]]
 +
[[category:Remote]]
 +
[[category:All]]

Latest revision as of 09:54, 25 October 2024

About Cab-Lab

Fractal Audio's Cab-Lab is a mixer and toolkit for IRs (Impulse Responses).

FRACTAL AUDIO QUOTES


In the world of Fractal Audio’s industry-leading amp modeling, many musicians recognize the importance of Impulse Responses (IRs). IRs can be thought of as sonic captures – essentially the frequency fingerprint of a tone over time. Fractal Audio was the first to allow installable IRs in a guitar product to recreate the sound of a mic’d speaker cabinet, setting a new industry standard. Suddenly, guitarists could encapsulate the essence of a speaker cab in a portable format, enhancing both studio recording and live performance. Now, Cab-Lab 4 with DynaCab makes it quicker, easier, more intuitive, and fun to achieve great tone, allowing you to customize and mix IRs yourself.

For decades, guitarists and audio pros have carefully selected, positioned, and mixed microphones on guitar speakers in the pursuit of great tone. Now you can do the same, and it is easier than ever before. With Cab-Lab 4, you get a 4-channel IR mixer, plus tools to EQ, align, and more, so you can select, position, and mix mics while listening in real-time. Meanwhile, new DynaCab technology makes tone sculpting easier than ever, eliminating the need to sift through countless individual IRs. In fact, the DynaCab system in Cab-Lab 4 offers even more resolution and flexibility than our hardware products, with 360° of placement at variable distances, the possibility of additional microphone choices, and more. Best of all, Cab-Lab is now FREE!

Cab-Lab 4 supports our latest DynaCab Packs, as well as traditional single IRs — whether from Fractal Audio legacy cab packs or 3rd party producers. Cab-Lab gives you the tools you need to create your own signature tones—delivering the high quality results you have come to expect from Fractal Audio Systems.

Cab-Lab 4 comes with both Standalone and Plugin Versions. The Standalone uses your Axe-Fx III, FM9, FM3, or another audio interface so you can monitor in realtime. Meanwhile, the plugin version processes audio in your compatible DAW or host and can be used both to re-cab raw amp recordings and export IRs for your Fractal Audio hardware product.

You can download Cab-Lab from its product page.

See the manual for more information.

Features

Features of Cab-Lab 4:

  • 4-Channel IR Mixer with per-channel level, EQ, mute, solo, and phase controls.
  • Each channel can be set to DynaCab or Single IR.
  • Single IR mode supports .wav, .ir, and non UltraRes .syx files.
  • DynaCab mode offers easy, intuitive, visual mic-on-speaker positioning with 360° center-to-edge mic placement, and adjustable mic distance.
  • DynaCab mode supports new DynaCab Packs, available from Fractal Audio's DynaCab Packs store.
  • Global and per-channel EQ with selectable-slope Low Cut and High Cut filters and frequency plots.
  • ZOOM view allows precise mic positioning using real-world centimeter (cm) or inch (in) units.
  • ALIGN view allows you to adjust IR time for precise phase control. DynaCabs are automatically aligned at any mic distance but can be adjusted further.
  • Built in Cab Pack Manager automatically handles DynaCab pack downloads, installation, and authorization.
  • Cab-Lab 4 Standalone connects directly to Axe-Fx III, FM9, and FM3 or any compatible audio interface for real time monitoring in Software Live Mode.
  • Standalone mode can send mix IRs directly to User Cab memories of the connected FAS device.
  • Hardware Manual audition mode sends your mix IR to Scratchpad 1 on a connected Fractal Audio device.
  • Audition setup uses easy DO IT! wizards.
  • Cab-Lab 4 Plugin runs in a DAW or host to re-cab life or recorded amp tracks. Cab-Lab 4 is an excellent way to re-cab plugins or a tube amp using the Fractal-Audio X-Load LB-2 Load box.
  • IR Capture Utility facilitates the creation of individual IRs using an Axe-Fx III.
  • Cab-Lab saves Sessions for total recall any time you re-launch the program.
  • Wav Conversion utility batch converts .wav IRs to .ir and .syx formats.
  • IR2Syx utility batch converts .ir to .syx.
  • IR Phase Invert utility batch corrects inverted IRs, such as those created when a speaker is wired backwards.
  • RefIR Batch utility applies a reference IR to remove coloration imparted by a power amp.
  • Rename IR utility renames a single IR.
  • Copy Filename to IR name batch utility allows changing the internal IR name of multiple files.
  • Cab-Lab 4 Standalone is self-updating when new versions are released.
  • New and improved dark mode look and feel.

Standalone and plugin versions

Cab-Lab 4 has two versions:

Standalone 
The standalone app operates independently without needing another software platform, while the plugin requires a host application or DAW such as Logic, Reaper, Live, etc. The Standalone uses your Axe-Fx III, FM9, FM3 or any compatible audio interface for Software Live Mode auditioning. A wizard helps you to set up an amp modeling only preset, allowing Cab-Lab to perform speaker cab simulation while you monitor, mix and adjust it in real time. When you’re happy with the result, you can save it as a file to your computer or directly to a connected Fractal Audio device. The standalone also includes a collection of powerful ir processing tools.
Plugin 
The plugin is tailored for re-cab applications in a DAW using any audio interface to mix and monitor in real-time. This allows you to mix and monitor in real time. It doesn’t connect to Fractal Audio hardware directly, but it offers the capability to export an IR to your computer. You can then upload this IR to any compatible Fractal Audio device later. The plugin for Macs requires 64-bit AU- or VST3 capable host software. The plugin for Windows requires 64- or 32-bit VST3 capable host software.

Audition modes

SW Live Mode (Software Live Mode)

Software Live Mode, in the standalone version, allows you to hear mic and mix changes in real time, replicating how this process works on analog gear. It relies on a signal with amp modeling but no cab processing. A wizard helps you to set up your Axe-Fx III, FM9, or FM3 for this purpose.

HW Manual Audition (Hardware Manual Audition)

This mode allows sending IRs manually to the scratch pad of a connected Axe-Fx III, FM9, or FM3.

Managing IRs

IR Capture

Cab-Lab also provides a software GUI for IR Capture, Fractal Audio's tool that lets you capture IRs with an Axe-Fx II or Axe-Fx III.

IR Capture.png

Cab Pack Manager

Use the built-in Cab Pack Manager to download, install, and authorize DynaCab packs purchased from Fractal Audio's online store.

Min Phase and Auto Trim

See Minimum Phase and Auto Trim for information.

UltraRes IRs

To mix UltraRes impulse responses in Cab-Lab, you need the .ir version of an impulse response. This is Fractal Audio's proprietary format, targeted at mixing impulse responses. Or you can use use a .wav file.

The underlying IRs in Fractal Audio's commercial DynaCab packs are UltraRes.

Stock cabs can't be mixed, unless you create .ir files by using IR Capture. That Cab block. I need help. in the forum explains how to do it.

FullRes IRs

Cab-Lab supports FullRes IR capturing and management.

Convert Wave, SYX and IR files

Creators of impulse responses often provide Wave files (.wav). These need to be converted to Fractal Audio's SYX (.syx) format to be able to be used in Fractal Audio's amp modelers. Cab-Lab provides a batch conversion routine. The Manage Cabs tool in the editors can also convert Wave files on the fly.

Rename IRs

Cab-Lab can rename the internal name of impulse responses. It can also rename impulse responses to match their filenames.

Tips, tricks and troubleshooting

Using Cab-Lab with a traditional amplifier

See X-Load Reactive Load LB-2 for more information.

FRACTAL AUDIO QUOTES


[1] Load your head with a load box, take the output of the load box into your computer and run the audio through Cab-Lab. I would recommend a reactive load box rather than a resistive one.

Fix no audio in Software Live Mode under Mac OS

Read this

Videos