Difference between revisions of "Pan/tremolo"

From Fractal Audio Wiki
Jump to navigation Jump to search
(Created article from manual's text)
 
m (level adjustments)
Line 2: Line 2:
 
The [[Axe-Fx]] Pan/Tremolo provides, as the name would imply, panning and tremolo effects. A panner moves the sound left/right in the stereo field while a tremolo varies the volume. Tremolo can be used to get that classic "surf" sound especially when used with some spring reverb.
 
The [[Axe-Fx]] Pan/Tremolo provides, as the name would imply, panning and tremolo effects. A panner moves the sound left/right in the stereo field while a tremolo varies the volume. Tremolo can be used to get that classic "surf" sound especially when used with some spring reverb.
  
==Parameters==
+
===Parameters===
 
*'''EFF TYPE''' - Chooses between the tremolo and panner.  
 
*'''EFF TYPE''' - Chooses between the tremolo and panner.  
 
*'''RATE''' - Sets the frequency of the LFO. Turning the control fully CCW locks the rate to the global LFO1 generator.  
 
*'''RATE''' - Sets the frequency of the LFO. Turning the control fully CCW locks the rate to the global LFO1 generator.  

Revision as of 08:15, 10 June 2007

Pan Tremolo block.jpg

The Axe-Fx Pan/Tremolo provides, as the name would imply, panning and tremolo effects. A panner moves the sound left/right in the stereo field while a tremolo varies the volume. Tremolo can be used to get that classic "surf" sound especially when used with some spring reverb.

Parameters

  • EFF TYPE - Chooses between the tremolo and panner.
  • RATE - Sets the frequency of the LFO. Turning the control fully CCW locks the rate to the global LFO1 generator.
  • DEPTH - Sets the modulation depth for the tremolo.
  • WIDTH - Sets the modulation depth for the panner. When Width is set to more than 100%, the Panner will pan beyond a normal stereo image
  • TEMPO - Locks the rate to the global tempo. For example, if the global tempo is 120 bpm and the tempo is set to a quarter note (1/4) then the LFO rate will be 2 Hz (120 bpm / 60 seconds = 2). To ignore the global tempo set the tempo control to NONE.
  • LFO TYPE - Selects the waveform for the LFO. Try experimenting with the Log or Exp waveforms.
  • DUTY - This controls the symmetry of the LFO waveform. It has no effect if the waveform is a sine wave. For a triangle wave this controls the shape of the waveform. At 50% the waveform is perfectly symmetrical. For a square wave this controls the ratio of time that the waveform is "on" as opposed to "off". This control has no effect for sine, log, exp or random waveforms
  • LFO PHASE - Adjusts the phase difference between the left and right lfo waveforms.
  • PAN CENTER - In panner mode adjusts the apparent center of the stereo image.