October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.
Difference between revisions of "Output block"
| Line 65: | Line 65: | ||
=Effects loop= | =Effects loop= | ||
| − | On the Axe-Fx III, FM9 and FM3, an Output block and [[Input block]] can operate as Effects Send/Return loop. | + | On the Axe-Fx III, FM9 and FM3, an Output block and [[Input block]] can operate as Effects Send/Return loop. Read this: [[Connections and levels]]. |
| − | |||
| − | Read this: [[ | ||
=Overriding Copy Output in the I/O menu= | =Overriding Copy Output in the I/O menu= | ||
Revision as of 20:36, 6 May 2023
Contents
Available on which products
- Axe-Fx III: 4 blocks
- FM9: 3 blocks
- FM3: 2 blocks
- Axe-Fx II: not a block
- AX8: not a block
- FX8: no
Channels or X/Y
- Axe-Fx III and FM9 and FM3: 4 channels
- Axe-Fx II: no
- AX8: no
About the Output block
The Output block is the spot where the signal exits the grid and leaves the unit through the corresponding output port.
Each Output block contains a mixer to mix the signal from the grid rows. The output level of each of the Scenes can be set.
Each Output block has 4 channels, and contains a mixer with Level and Balance controls for each grid row, plus master Output Level, Balance and Bypass controls.
- Output 1 — Transmits signal to the physical Output 1 jacks and to USB Inputs 1+2 on a connected computer.
- Output 2 — Transmits signal to the physical Output 2 jacks and to USB Inputs 3+4 on a connected computer.
- Output 3 — Transmits signal to the physical Output 3 jacks.
- Output 4 — Transmits signal to the physical Output 4 jacks.
The Output 1 block signal may also be transmitted:
- through the digital outputs, if SPDIF/AES Out Source is set to Output 1
- through Output 2, if Output 2 Copy Output 1 is turned on and there's no Output 2 block on the grid.
The Output 2 block signal may also be transmitted through the digital outputs if SPDIF/AES Out Source is set to Output 2.
The Output blocks can be muted. The signal is muted at the corresponding output AND on the grid.
On the Axe-Fx III, FM9 and FM3, an Output block can also operate as Effects Send in an effects loop. See below.
Read this:
Output block position on the grid
Axe-Fx II and AX8— The Output block has a fixed position at the end of the grid.
Axe-Fx III, FM9, FM3 — The Output blocks can be positioned freely on the grid.
(Axe-Fx III product information) "Routing flexibility is enhanced by unconstrained placement of input and output blocks anywhere in the routing grid. Want to insert different outboard devices at different parts of the signal path? No problem. Simultaneously process discrete stereo output for acoustic and electric guitars? Easy. Send stereo to front-of-house, plus a true “Wet-Dry-Wet” on stage while recording a DI for re-amping later? No problem! Each output pair also has its own dedicated front panel LEVEL knob for convenient control."
Set and view levels
The Output block level is stored per scene.
The Output block meters come BEFORE the Level controls (pre-fader) on the front panel, and are therefore uneffected by the Level controls. The meters indicate the internal signal level relative to full-scale (dBFS). When you hit the red line in the meters, you're still 12dB away from clipping. [1]
The Vol Inc and Vol Dec commands (footswitches and MIDI) provide a convenient way to adjust preset levels on the fly (without manual editing). They let you adjust the output level per scene in steps of 1 dB while playing. Read this: Vol Inc and Vol Dec.
Read this: Preset levels.
Effects loop
On the Axe-Fx III, FM9 and FM3, an Output block and Input block can operate as Effects Send/Return loop. Read this: Connections and levels.
If the preset contains an Output block (Axe-Fx III, FM9, FM3) or FXL block (AX8, Axe-Fx II), it overrides the Copy Output setting in the I/O menu.
Global blocks
Output blocks don't support Global blocks.
