October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.
Difference between revisions of "Ring Modulator block"
| Line 6: | Line 6: | ||
* '''Axe-Fx III''': 1 block | * '''Axe-Fx III''': 1 block | ||
| − | * '''FM3''': yes | + | * '''FM3''': yes @@ |
* '''Axe-Fx II''': 1 block | * '''Axe-Fx II''': 1 block | ||
* '''AX8''': 1 block | * '''AX8''': 1 block | ||
Revision as of 14:08, 30 April 2019
Contents
Available on which products
- Axe-Fx III: 1 block
- FM3: yes @@
- Axe-Fx II: 1 block
- AX8: 1 block
- FX8: 1 block
Channels or X/Y switching
- Axe-Fx III: 2 channels
- FM3: 2 channels
- Axe-Fx II: no
- AX8: no
- FX8: no
What is a Ring Modulator
A Ring Modulator outputs the sum and difference of frequencies in multiple waveforms, often resulting in 'robotic' sounds.
Types
The Ring Modulator has three types:
- Classic
- SSB Upper
- SSB Lower
“SSB Upper” and “SSB Lower” select the upper and lower sidebands of the modulation.
Tracking
With TRACKING enabled the frequency of the oscillator tracks the pitch of the notes on the fretboard.
Parameters
| Parameter | Axe-Fx III / FM3 | Axe-Fx II | AX8 / FX8 |
|---|---|---|---|
| Type | yes | ||
| Frequency | yes | ||
| Frequency Multiplier | yes | ||
| High Cut Frequency | yes | ||
| Pitch Tracking | yes |
Special Ring Modulator effects
Octaver
The Ring Modulator works great as an Octaver (adding a low octave). Enable TRACKING, set FREQ to 500 Hz, and turn down HIGH CUT FREQUENCY to 500 Hz or lower.
Tremolo
You can configure the Ring Modulator to act as a Tremolo, by turning down FREQUENCY all the way.
Fixed Flanger
"The Resonator block is basically a type of fixed flanger. Well, four of them in parallel actually." source
Pedal control
Attach a pedal to the FREQ parameter, to create an "Evil Whammy" effect.
