Difference between revisions of "Midi bome"

From Fractal Audio Wiki
Jump to navigation Jump to search
m
Line 38: Line 38:
  
 
* [[Axe_midi | Back to MIDI Main Menu]]
 
* [[Axe_midi | Back to MIDI Main Menu]]
 +
 +
[[Category:MIDI]]

Revision as of 16:29, 22 February 2008

MIDI Bome SendSX

The Bome SendSX is a simple MIDI Sysx protocol. It will allow you to do the following:

1. Upload new firmware to the Axe-FX.
2. Upload or Download Preset Banks.
3. Upload or Download Single Presets.

Download and Install Bome

Go to the Bome website and download the SendSX program (currently SendSX130beta2.exe) to your computer. Double click and install the program.

Saving a Single Preset

1. Load the Bome Application.

Choose your MIDI In Device
2. Choose your MIDI In and MIDI Out device.

3. Dial in a preset on the Axe-FX.

4. Press Recall to load in buffer.

Dump MIDI to Bome In
5. Press Utility Button and choose Dump Preset to Midi.

Save MIDI file just imported into Bome
6. On Bome choose File>Save MIDI In As and choose a filename.

Choose location on your computer to save file.
7. Choose a location on your computer to save file to.

Restore a Single Preset

1. Load the Bome Application.

2. Choose your MIDI In and MIDI Out device (same as Saving).

3. Dial in your desired preset location on the Axe-FX.

4. Caution: The preset at that location will be overwritten (when you hit save).

Choose location on your computer to save file.
5. On Bome choose File> Open > and choose a preset file (sysx) from computer.

Send file to Axe at the dialed in preset location.
6. On Bome Hit Send(F4).

7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your safety net.

8. Choose Store to save preset OR roll dial 1 notch off and back on to cancel this transfer.