Mixer

The Mixer is a simple linear mixer that mixes the four rows feeding the block according to the gains for each row. The Mixer allows you to fine-tune levels, or cross-fade between effects. This is especially useful for cross-fading amps or delays.

Each gain control corresponds to a row in the routing matrix. To adjust, for example, the gain for the effect in row two preceding this block, simply adjust GAIN2.

The PAN controls allow you to select the balance of left and right from each row summed into the outputs. This is useful if you have differing signals in the left and right channels on a row. For example, you can use set up a routing where two amp blocks feed a single cabinet block with one amp panned hard left, the other panned hard right. You can now fade between the two amp blocks using the PAN control. Attach the PAN control to a modifier for real-time control.

The controls are linear (as opposed to logarithmic like most other gain controls). This makes setting up cross-fades much easier.