Difference between revisions of "Cae 3+ SE Lead Tips"
Jump to navigation
Jump to search
(Created page with '-This amp has great tone right out of the gate. Any high gain player will want to check it out. This list of tweaks I think is the key to getting this amp from "good" to "great" …') |
(→CAE 3+ Lead: made the list format a bit more readable) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | ====CAE 3+ Lead==== | |
| − | + | ||
| − | + | This amp has great tone right out of the gate. Any high gain player will want to check it out. This list of tweaks I think is the key to getting this amp from "good" to "great" territory. | |
| − | + | *Start by setting everything at noon. This obviously does not include the presence control which should be set at roughly 6. | |
| − | + | *Unlike a lot of high gain amps, the 3+ doesn't really benefit from a drive in front of it. Some may like to try it but I think it introduces fizz | |
| − | + | *The 3+ (at least through my system) has a fair amount of fizz that some won't like. The easiest way to get rid of this is the high cut parameter, which I like to set at 14000 | |
| − | + | *The low cut doesn't do much for this amp. You can try turning it up but I find any more than 45 hz takes away some balls | |
| − | + | *The mid control on this amp is very important. Don't be afraid to raise it up quite high. It opens up the sound. | |
| − | + | *I usually keep the bass and treble at noon but it's fine to boost or cut them if the application calls for it. | |
| − | + | *to make the 3+ more squishy, simply lower the damp knob. And inversely, raise it to make the amp tighter. I personally like it at noon. | |
| − | + | *The master likes to stay between 4 and 5. Any higher and the amp starts getting rough like a Marshall. | |
| + | *The power tube bias, if raised will make the amp more jangly. But for most purposes, it should be left alone. | ||
| + | *Raising the Xformer match to about 6.5 seems to add some mojo to the amp. Try it and see for yourself. | ||
Latest revision as of 19:15, 25 November 2009
CAE 3+ Lead
This amp has great tone right out of the gate. Any high gain player will want to check it out. This list of tweaks I think is the key to getting this amp from "good" to "great" territory.
- Start by setting everything at noon. This obviously does not include the presence control which should be set at roughly 6.
- Unlike a lot of high gain amps, the 3+ doesn't really benefit from a drive in front of it. Some may like to try it but I think it introduces fizz
- The 3+ (at least through my system) has a fair amount of fizz that some won't like. The easiest way to get rid of this is the high cut parameter, which I like to set at 14000
- The low cut doesn't do much for this amp. You can try turning it up but I find any more than 45 hz takes away some balls
- The mid control on this amp is very important. Don't be afraid to raise it up quite high. It opens up the sound.
- I usually keep the bass and treble at noon but it's fine to boost or cut them if the application calls for it.
- to make the 3+ more squishy, simply lower the damp knob. And inversely, raise it to make the amp tighter. I personally like it at noon.
- The master likes to stay between 4 and 5. Any higher and the amp starts getting rough like a Marshall.
- The power tube bias, if raised will make the amp more jangly. But for most purposes, it should be left alone.
- Raising the Xformer match to about 6.5 seems to add some mojo to the amp. Try it and see for yourself.
