Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Setup menu"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 24: Line 24:
 
* [[Presets#Prompt_on_Edited_Preset_Change|Prompt On Edited Preset Change]]
 
* [[Presets#Prompt_on_Edited_Preset_Change|Prompt On Edited Preset Change]]
 
* [[Presets#Preset_numbering|Display Offset]]
 
* [[Presets#Preset_numbering|Display Offset]]
* Default Scene
+
* [[Scenes#Default_scene|Default Scene]]
* Tap Tempo
+
* [[Tempo|Tap Tempo]]
 
* Value Knob Push Function
 
* Value Knob Push Function
* AC Line Frequency
+
* [[Noise_gate#Global_menu:_AC_Line_Freq|AC Line Frequency]]
  
 
==I/O==
 
==I/O==

Revision as of 18:41, 11 June 2021

The Setup menu on the Axe-Fx III and FM3 gives access to important system parameters. It has the following submenus:

FC Controllers

This lets you configure connected FC-6 and FC-12 controllers. Read more. Alternatively, use the software editor.

Pedals which are connected directly to the Axe-Fx or FM3 need to be configured in the I/O menu.

Global Settings

Click on an item below for more information.

I/O

This lets you configure all audio inputs and outputs, return levels of USB channels and SPDIF/AES, and the pedal port(s) at the rear of the hardware.
All entries are explained here: I/O menu.

IR Capture

This lets you capture impulse responses using the hardware interface.
Read more.

MIDI/Remote

This lets you configure MIDI settings and external controllers.
Read more.

Utilities

  • Display: sets the brightness of the display, and the brightness and color of the logo on the Axe-Fx III Mark II.
  • ADC Levels: shows the digital level of the output ports and pedal ports.
  • Version: shows the version of the installed firmware, USB firmware and FPGA.