Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Scene MIDI block"

From Fractal Audio Wiki
Jump to navigation Jump to search
(45 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
=Available on which Fractal Audio products=
+
[[image:MIDI.png|link=]]
* '''Axe-Fx III''': 1x.
+
=Available on which products=
* '''Axe-Fx II''': no.
 
* '''FX8''': no.
 
* '''AX8''': no.
 
  
=X/Y and channels=
+
* '''Axe-Fx III''': 1 block
* '''Axe-Fx III''': no.
+
* '''FM3''': 1 block
* '''Axe-Fx II''': n/a.
+
* '''Axe-Fx II''': no
* '''FX8''': n/a.
+
* '''FX8''': yes
* '''AX8''': n/a.
+
* '''AX8''': no
  
=What is the Scene MIDI block=
+
=Channels or X/Y switching=
  
This Axe-Fx III block sends up to 8 CC or PC MIDI messages through the MIDI OUT port upon scene changes. It must be added to the grid to use, but it does not have to be connected to the signal chain.
+
* '''Axe-Fx III and FM3''': no
 +
* '''FX8''': X/Y
  
You can also have the Axe-Fx III transmit a MIDI PC through MIDI OUT with each preset change. Set this in I/O > MIDI/Remote.
+
=Purpose=
  
More information in the Owner's Manual.
+
The block lets you send up to 8 CC or PC MIDI messages through the MIDI OUT port upon scene changes, through different MIDI channels if needed. The MIDI messages can vary per scene.
 +
 
 +
The block must be added to the grid to use, but does not have to be connected to the signal chain. it can't be bypassed, but a scene can be configured to send no MIDI messages.
 +
 
 +
Tip: you can use the Scene MIDI block to send MIDI commands to the device itself, by connecting MIDI OUT to MIDI IN.
 +
 
 +
<blockquote>(Axe-Fx III) "The MIDI block only sends data out the MIDI Out DIN jack. It does NOT send to the USB. The purpose of the MIDI block is to control other equipment in you rack via standard MIDI." [http://forum.fractalaudio.com/threads/axe-fx-iii-firmware-version-2-03.145132/page-8#post-1718184 source]</blockquote>
 +
 
 +
[[Owners_Manuals|Owner's Manual]]
 +
 
 +
[[MIDI|More information about MIDI]]
 +
 
 +
=Parameters=
 +
 
 +
{| class="wikitable"
 +
|-
 +
! '''Parameter'''
 +
! '''Axe-Fx III / FM3'''
 +
|-
 +
| Type
 +
! yes (CC/PC)
 +
|-
 +
| Channel
 +
! yes
 +
|-
 +
| Number
 +
! yes
 +
|-
 +
 
 +
| Value
 +
! yes
 +
|}
  
 
[[category:Axe-Fx3]]
 
[[category:Axe-Fx3]]
[[category:Sounds]]
+
[[category:FX8]]
 
[[category:Remote]]
 
[[category:Remote]]

Revision as of 18:39, 8 August 2019

MIDI.png

Available on which products

  • Axe-Fx III: 1 block
  • FM3: 1 block
  • Axe-Fx II: no
  • FX8: yes
  • AX8: no

Channels or X/Y switching

  • Axe-Fx III and FM3: no
  • FX8: X/Y

Purpose

The block lets you send up to 8 CC or PC MIDI messages through the MIDI OUT port upon scene changes, through different MIDI channels if needed. The MIDI messages can vary per scene.

The block must be added to the grid to use, but does not have to be connected to the signal chain. it can't be bypassed, but a scene can be configured to send no MIDI messages.

Tip: you can use the Scene MIDI block to send MIDI commands to the device itself, by connecting MIDI OUT to MIDI IN.

(Axe-Fx III) "The MIDI block only sends data out the MIDI Out DIN jack. It does NOT send to the USB. The purpose of the MIDI block is to control other equipment in you rack via standard MIDI." source

Owner's Manual

More information about MIDI

Parameters

Parameter Axe-Fx III / FM3
Type yes (CC/PC)
Channel yes
Number yes
Value yes