Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Reverb block"

From Fractal Audio Wiki
Jump to navigation Jump to search
(31 intermediate revisions by 2 users not shown)
Line 6: Line 6:
  
 
* '''Axe-Fx III''': 2 blocks
 
* '''Axe-Fx III''': 2 blocks
* '''FM3''': with Amp block: 1, without Amp block: 2
+
* '''FM3''': 1 block
 
* '''Axe-Fx II''': 2 blocks
 
* '''Axe-Fx II''': 2 blocks
 
* '''AX8''': 1 block
 
* '''AX8''': 1 block
Line 27: Line 27:
 
Reverb has been improved in firmware Ares. Also, lots of types (including various "cloud" types) haven been added.
 
Reverb has been improved in firmware Ares. Also, lots of types (including various "cloud" types) haven been added.
  
Reverb defaults to high-quality on the Axe-Fx III. On the FM3, Reverb can run in high-quality only without amp modeling (amp modeling and reverb run on the same processor).
+
Reverb defaults to high-quality on the Axe-Fx III.  
  
 
<blockquote>(Axe-Fx III) "The new reverb algorithms use more CPU than those from the Axe-Fx II would use but they sound better. Also the reverb defaults to high-quality mode whereas the II defaults to normal-quality mode." [http://www.thegearpage.net/board/index.php?threads/axe-fx-iii.1907452/page-68#post-25886137 source] </blockquote>
 
<blockquote>(Axe-Fx III) "The new reverb algorithms use more CPU than those from the Axe-Fx II would use but they sound better. Also the reverb defaults to high-quality mode whereas the II defaults to normal-quality mode." [http://www.thegearpage.net/board/index.php?threads/axe-fx-iii.1907452/page-68#post-25886137 source] </blockquote>
  
<blockquote>(FM3) "Reverb uses a ton of CPU. On Axe-Fx 3 the reverbs have a "Hi Quality" mode that makes them sound better at the cost of more CPU usage." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-5#post-1782403 source]</blockquote>
+
Firmware Ares 12:
  
<blockquote>(FM3) "It will support all the reverb types of Axe-FX 3. You won't have to use spring reverbs to save CPU since the core can run the Amp and 1 reverb, and all the other blocks are on the other core." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-6#post-1782431 source]</blockquote>
+
<blockquote>"Improved Spring Reverb algorithm. Also added “Boiiinnng!” parameter which controls the “springiness” of the reverb."</blockquote>
  
<blockquote>"The FM3 has the Plex and Cloud reverbs. [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-14#post-1784117 source]</blockquote>
+
Firmware Ares 12 also added another Spring reverb type: the Deluxe String Reverb.
  
 
[http://www.youtube.com/watch?time_continue=3&v=AFBiAF19iVg Camilo Velandia demonstrates Reverb types in the Axe-Fx III]
 
[http://www.youtube.com/watch?time_continue=3&v=AFBiAF19iVg Camilo Velandia demonstrates Reverb types in the Axe-Fx III]
 +
 +
Firmware Ares 12.08:
 +
 +
<blockquote>"Improved Reverb algorithms."</blockquote>
 +
<blockquote>"Added ECONOMY mode to Reverb block. This can be used to reduce CPU usage when building elaborate presets."</blockquote>
  
 
=Reverb types=
 
=Reverb types=
Line 70: Line 75:
 
<blockquote>"Placing reverb after the Cab is the recommended routing. The reverb is stereo. The Cab block may be mono so you would lose the stereo field. Both blocks are linear so there is no advantage to placing reverb before the Cab."</blockquote>
 
<blockquote>"Placing reverb after the Cab is the recommended routing. The reverb is stereo. The Cab block may be mono so you would lose the stereo field. Both blocks are linear so there is no advantage to placing reverb before the Cab."</blockquote>
  
Try putting the Spring Reverb type ''before'' the Amp block for authenticity.
+
Put the Spring Reverb type ''before'' the Amp block for authenticity.
 +
 
 +
<blockquote>"Our spring reverb is great. You just need to put it before the amp block as this is equivalent to how it would be in the amp. If you put it after the amp block it won't sound the same." [https://www.thegearpage.net/board/index.php?threads/fender-tonemaster-dr.2078420/page-3#post-29194985 source]</blockquote>
 +
 
 +
<blockquote>"The spring reverb in a fender amp is "effectively" in front because the preamp is essentially linear. Any distortion in a Fender comes from the power amp. Since the preamp is linear putting the reverb before the preamp is the same as putting it after preamp since linear systems are commutative, i.e. x + y = y + x. Also, our spring reverb algorithm has been updated recently and sounds better than before. I used our Fender '63 Reverb unit as the reference." [https://www.thegearpage.net/board/index.php?threads/fender-tonemaster-dr.2078420/page-4#post-29198602 source]</blockquote>
  
 
<blockquote>"For authentic spring reverb sound you want the reverb in front of the amp block. A big reason spring reverbs sound the way they do is that they get colored by the amp." [http://forum.fractalaudio.com/threads/spring-reverbs.110084/page-2#post-1317882 source] </blockquote>
 
<blockquote>"For authentic spring reverb sound you want the reverb in front of the amp block. A big reason spring reverbs sound the way they do is that they get colored by the amp." [http://forum.fractalaudio.com/threads/spring-reverbs.110084/page-2#post-1317882 source] </blockquote>
Line 92: Line 101:
 
=Reverb and CPU usage=
 
=Reverb and CPU usage=
  
Reverb uses a lot of CPU.
+
Reverb requires a lot of CPU power.
  
<blockquote>"Reverb uses a ton of CPU. On Axe-FX3 the reverbs have a "Hi Quality" mode that makes them sound better at the cost of more CPU usage." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-5#post-1782403 source]</blockquote>
+
Higher quality modes (Economy, Normal, High, Ultra) increase CPU usage. The Economy and Ultra modes are available in firmware Ares for the Axe-Fx 3 and FM3 only.
 +
 
 +
<blockquote>"Reverb uses a ton of CPU. On Axe-Fx 3 the reverbs have a "Ultra" mode that makes them sound better at the cost of more CPU usage." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-5#post-1782403 source]</blockquote>
  
 
If CPU usage on the AX8 and FX8 gets above 90%, the processor will start disabling blocks. Usually Reverb is first, because it tends to suck up the most CPU power.
 
If CPU usage on the AX8 and FX8 gets above 90%, the processor will start disabling blocks. Usually Reverb is first, because it tends to suck up the most CPU power.
  
On the FM3, amp modeling and reverb run on the same processor.
+
On the FM3, amp modeling and reverb do NOT run on the same processor; this was true for an early beta version but not in the final release version.
  
 
Common methods to reduce CPU usage in the Reverb block: switch it to Normal Quality, reduce Density, or switch to Spring Reverb (uses the least amount of CPU).
 
Common methods to reduce CPU usage in the Reverb block: switch it to Normal Quality, reduce Density, or switch to Spring Reverb (uses the least amount of CPU).
Line 106: Line 117:
 
=Mono or stereo reverb=
 
=Mono or stereo reverb=
  
The Reverb's output is stereo. You can make it mono by setting Stereo Width to 0%.
+
The signal at the input of the Reverb block (only the part for reverberation, not the passing-through signal) is summed to mono.  
  
The signal at the input of the Reverb block (only the part for reverberation, not the passing-through signal) is summed to mono.  
+
The Reverb's output is stereo (except Spring reverbs). You can make it mono by setting Stereo Width to 0%.
  
 
<blockquote>"Stereo imaging is not effected. The L/R summation is only into the reverb engine itself. The dry signal is unaffected." [http://forum.fractalaudio.com/threads/stereo-reverb-blocks.127191/#post-1513261 source]</blockquote>
 
<blockquote>"Stereo imaging is not effected. The L/R summation is only into the reverb engine itself. The dry signal is unaffected." [http://forum.fractalaudio.com/threads/stereo-reverb-blocks.127191/#post-1513261 source]</blockquote>
 +
 +
<blockquote>"The non-spring types create stereo." [https://forum.fractalaudio.com/threads/spring-reverb-12-09.162502/post-1947330 source]</blockquote>
  
 
The [[FAS-FX Reverb plugin]] does not sum the input signal for reverberation to mono. It keeps and processes both sides in stereo.
 
The [[FAS-FX Reverb plugin]] does not sum the input signal for reverberation to mono. It keeps and processes both sides in stereo.
Line 137: Line 150:
 
When Predelay is at zero, the Reverb block is simulating a room. Most of the Reverb presets have a bit of predelay because that is typically done on recordings to get the reverb "out of the way". Likewise the Early Reflections are mixed low because most engineers/producers find that they clutter the mix. Playing solo that "in the room" thing is cool but it makes the sound difficult to mix." [http://www.thegearpage.net/board/index.php?threads/whats-lacking-in-todays-modelers.2009046/page-2#post-27810465 source]</blockquote>
 
When Predelay is at zero, the Reverb block is simulating a room. Most of the Reverb presets have a bit of predelay because that is typically done on recordings to get the reverb "out of the way". Likewise the Early Reflections are mixed low because most engineers/producers find that they clutter the mix. Playing solo that "in the room" thing is cool but it makes the sound difficult to mix." [http://www.thegearpage.net/board/index.php?threads/whats-lacking-in-todays-modelers.2009046/page-2#post-27810465 source]</blockquote>
  
<blockquote>(firmware 2.05) "The early reflections in both the cab and reverb block were tweaked. The cab block now assumes a dipole radiator so the reflections off the front wall are inverted." [http://forum.fractalaudio.com/threads/axe-fx-iii-firmware-2-05-public-beta.146211/page-5#post-1729420 source]</blockquote>
+
<blockquote>(firmware Ares 2.05) "The early reflections in both the cab and reverb block were tweaked. The cab block now assumes a dipole radiator so the reflections off the front wall are inverted." [http://forum.fractalaudio.com/threads/axe-fx-iii-firmware-2-05-public-beta.146211/page-5#post-1729420 source]</blockquote>
  
 
=Parameters=
 
=Parameters=
Line 149: Line 162:
 
! '''Axe-Fx II'''
 
! '''Axe-Fx II'''
 
! '''AX8 / FX8'''
 
! '''AX8 / FX8'''
 +
|-
 +
| Input Select
 +
! yes
 +
!
 +
!
 
|-
 
|-
 
| Type
 
| Type
Line 180: Line 198:
 
!  
 
!  
 
|-
 
|-
| HF Decay Time
+
| HF Decay Time, LF Decay Time
 
! yes
 
! yes
 
!  
 
!  
 
!  
 
!  
 
|-
 
|-
| LF Decay Time
+
| LF Crossover
 +
! yes
 +
!
 +
!
 +
|-
 +
|-
 +
| Echo Density
 
! yes
 
! yes
 
!  
 
!  
 
!  
 
!  
 
|-
 
|-
| LF Crossover
+
| Early Diffusion, Early Diffusion Time
 
! yes
 
! yes
!
+
!  
!
+
!  
|-
 
 
 
 
|-
 
|-
 
| Early Decay
 
| Early Decay
Line 212: Line 234:
 
!
 
!
 
|-
 
|-
| Hold
+
| Stack/Hold (firmware Ares 12 and later)
 
! yes
 
! yes
 
!
 
!
Line 222: Line 244:
 
!
 
!
 
|-
 
|-
| Input Diffusion
+
| Input Diffusion, Input Diffusion Time
! yes
 
!
 
!
 
|-
 
| Input Diffusion Time
 
 
! yes
 
! yes
 
!
 
!
Line 237: Line 254:
 
!  
 
!  
 
|-
 
|-
| Low Cut
+
| Low Cut, High Cut
 
! yes
 
! yes
 
!  
 
!  
 
!  
 
!  
 
|-
 
|-
| High Cut
+
| Freq 1/2, Q 1/2, Gain 1/2
 
! yes
 
! yes
 
!  
 
!  
 
!  
 
!  
 
|-
 
|-
| Crossover Frequency
+
| Mod: Depth, Rate
 
! yes
 
! yes
!  
+
!
 
!  
 
!  
 
|-
 
|-
| Low Frequency Time
+
| LFO Phase
! yes
 
!
 
!
 
|-
 
| High Frequency Time
 
! yes
 
!
 
!
 
|-
 
| Echo Density
 
! yes
 
!
 
!
 
|-
 
| Early Diffusion
 
! yes
 
!
 
!
 
|-
 
| Early Diffusion Time
 
! yes
 
!
 
!
 
|-
 
| Stereo Spread
 
 
! yes
 
! yes
 
!
 
!
!
 
|-
 
| Low Mid = Freq 1, Q 1, Gain 1
 
! yes
 
!
 
!
 
|-
 
| High Mid = Freq 2, Q 2, Gain 2
 
! yes
 
!
 
 
!  
 
!  
 
|-
 
|-
| Mod Depth
+
| Input Gain
 
! yes
 
! yes
 
!
 
!
 
!  
 
!  
 
|-
 
|-
| Mod Rate
+
| Stereo Spread
 
! yes
 
! yes
 
!
 
!
!
 
|-
 
| LFO Phase
 
! yes
 
 
!
 
!
!
 
|-
 
| Ducker Threshold
 
! yes
 
!
 
!
 
 
|-
 
|-
| Ducker Attenuation
+
| Ducker: Threshold, Attenuation, Threshold
 
! yes
 
! yes
 
!  
 
!  
 
!  
 
!  
 
|-
 
|-
| Ducker Release
+
| Spring: Number, Tone, Drive, Boiiinnng!
! yes
 
!
 
!
 
|-
 
| Spring Number of Springs
 
! yes
 
!
 
!
 
|-
 
| Spring — Tone
 
! yes
 
!
 
!
 
|-
 
| Spring — Drive
 
 
! yes
 
! yes
 
!
 
!
Line 344: Line 301:
 
==Quality==
 
==Quality==
  
There are two Quality options in the Reverb block: Normal and High. High quality uses significantly more CPU but provides world-class reverberation algorithms. In most situations, especially live, Normal Quality already provides the desired results. Most people won't notice any difference.
+
There are 3 "Quality" options in the Reverb block (firmware Ares 12 and later): Normal, High and Ultra-High. High quality uses significantly more CPU but provides world-class reverberation algorithms. Ultra-High increases modulation at the expense of a slight increase in CPU usage. In most situations, especially live, Normal Quality already provides the desired results. Most listeners won't notice any difference.
  
The Spring Reverb type doesn't differentiate between Normal and High Quality.
+
The Spring Reverb type doesn't have the Quality parameter.
  
The Axe-Fx II, FX8 and AX8 default to Normal Quality, where the Axe-Fx III defaults to High Quality. The FM3 defaults to normal-quality reverbs.  
+
The Axe-Fx II, FX8 and AX8 default to Normal Quality, where the Axe-Fx III defaults to High Quality. The FM3 defaults to Normal Quality.  
  
 
<blockquote>"Reverb uses a ton of CPU. On Axe-FX3 the reverbs have a "Hi Quality" mode that makes them sound better at the cost of more CPU usage." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-5#post-1782403 source]</blockquote>
 
<blockquote>"Reverb uses a ton of CPU. On Axe-FX3 the reverbs have a "Hi Quality" mode that makes them sound better at the cost of more CPU usage." [https://forum.fractalaudio.com/threads/fm3-hot-questions-and-hopefully-answers.149968/page-5#post-1782403 source]</blockquote>
 +
 +
<blockquote>”In the Reverb block it selects a more advanced algorithm.“ [https://forum.fractalaudio.com/threads/high-quality-mode.157143/post-1872318 source]</blockquote>
  
 
==Time==
 
==Time==
Line 356: Line 315:
 
Maximum Reverb Time is 100 seconds in firmware Ares.
 
Maximum Reverb Time is 100 seconds in firmware Ares.
  
==Hold==
+
==Stack/Hold==
  
 
When Hold is activated, the wet input to the block is muted and Time is set to infinity. This can be used to achieve pad sounds and drone notes/chords.
 
When Hold is activated, the wet input to the block is muted and Time is set to infinity. This can be used to achieve pad sounds and drone notes/chords.
Line 367: Line 326:
  
 
<blockquote>"When activating reverb hold the time is increased to infinity. This causes a bunch of stuff to be recalculated which can cause a click. I'll have to look into it." [http://forum.fractalaudio.com/threads/3-01-reverb-hold-crackling.147319/#post-1741239 source]</blockquote>
 
<blockquote>"When activating reverb hold the time is increased to infinity. This causes a bunch of stuff to be recalculated which can cause a click. I'll have to look into it." [http://forum.fractalaudio.com/threads/3-01-reverb-hold-crackling.147319/#post-1741239 source]</blockquote>
 +
 +
Firmware Ares 12 added the "Stack" feature:
 +
 +
<blockquote>"Added Stack/Hold parameter to Plex Delay and Plex Verb types in the Plex block. When set to STACK incoming audio is stacked on existing audio and held. When set to HOLD existing audio is held."</blockquote>
 +
 +
When attaching a pedal to Off/Stack/Hold, Heel is Off, Stack is middle and Toe is Hold.
  
 
==Early Diffusion==
 
==Early Diffusion==
Line 403: Line 368:
  
 
Note that Rev Mix may not work well with Reverb blocks in parallel rows which have Mix at 100%.
 
Note that Rev Mix may not work well with Reverb blocks in parallel rows which have Mix at 100%.
 +
 +
Effects Mix is another Global parameter that boosts or cuts the Mix value of all blocks for which the GLOBAL MIX parameter is set to “ON”.
  
 
=Tips and tricks=
 
=Tips and tricks=

Revision as of 08:22, 24 June 2020

Iii-reverb.jpg Reverb block.png

Available on which products

  • Axe-Fx III: 2 blocks
  • FM3: 1 block
  • Axe-Fx II: 2 blocks
  • AX8: 1 block
  • FX8: 2 blocks
  • FAS-FX Reverb plugin

Channels or X/Y switching

  • Axe-Fx III and FM3: 4 channels
  • Axe-Fx II: X/Y
  • AX8: X/Y
  • FX8: X/Y

FAS-FX Reverb plugin

Fractal Audio's reverb is also available as a software plugin (AAX, AU, VST): FAS-FX Reverb plugin

Reverb in the Axe-Fx III and FM3

Reverb has been improved in firmware Ares. Also, lots of types (including various "cloud" types) haven been added.

Reverb defaults to high-quality on the Axe-Fx III.

(Axe-Fx III) "The new reverb algorithms use more CPU than those from the Axe-Fx II would use but they sound better. Also the reverb defaults to high-quality mode whereas the II defaults to normal-quality mode." source

Firmware Ares 12:

"Improved Spring Reverb algorithm. Also added “Boiiinnng!” parameter which controls the “springiness” of the reverb."

Firmware Ares 12 also added another Spring reverb type: the Deluxe String Reverb.

Camilo Velandia demonstrates Reverb types in the Axe-Fx III

Firmware Ares 12.08:

"Improved Reverb algorithms."

"Added ECONOMY mode to Reverb block. This can be used to reduce CPU usage when building elaborate presets."

Reverb types

The reverbs (types) are based on several algorithms, such as:

  • SPRING — simulates the physical spring reverb in a guitar amp
  • ROOM — simulates natural realistic short reverb in a room
  • CHAMBER — simulates natural reverb in a boxy chamber (bright, resonant reverb)
  • HALL — simulates natural long reverb in a concert hall. Similar to Room but a little less smooth and with some response peaks. Use this when you want your sound to stand out
  • PLATE — simulates a vibrating reverb plate with a smooth sound
  • STUDIO — models classic digital studio reverb units
  • TUNNEL — simulates natural reverb in a tunnel (long, narrow space, great for special effects)

Some of the types are modeled after famous reverb units:

  • London Plate — probably based on the EMT 140 plate reverb
  • Sun Plate — probably based on the plate reverb used on in Sun Studio
  • North and South Church — inspired by the Bricasti source
  • "cloud" types: probably inspired by the Big Sky

"The reverb block in the Axe-Fx is very powerful. Turn the Early Level up and the Late Level down and you can hear the different "spaces". There's a variety of room shapes from almost square to long and narrow along with plates and springs. The Size parameter allows you to scale the dimensions." source

"David Griesinger probably knows more about reverb than everyone else combined. He's the father of the Lexicon reverbs. According to him, and I have no reason to doubt him, real reverb (i.e. reverb from a real space) is actually inferior to synthetic reverb. This is due to human perception. Real reverb (and by extension convolution reverb) actually reduces intelligibility and clarity due to the particular nature of the decay, the decay being exponential. Synthetic reverb allows one to craft the decay curve thereby rendering improved clarity. If the decay curve is flat for a period and then exponential it doesn't clutter the desired program material. The new reverb algorithms in the Axe-Fx are based on his theories." source

Many factory presets feature some kind of reverb.

Position of the Reverb block on the grid

In the studio, in DAWs and 19" rigs reverb usually is placed somewhere at the end of the chain.

"Placing reverb after the Cab is the recommended routing. The reverb is stereo. The Cab block may be mono so you would lose the stereo field. Both blocks are linear so there is no advantage to placing reverb before the Cab."

Put the Spring Reverb type before the Amp block for authenticity.

"Our spring reverb is great. You just need to put it before the amp block as this is equivalent to how it would be in the amp. If you put it after the amp block it won't sound the same." source

"The spring reverb in a fender amp is "effectively" in front because the preamp is essentially linear. Any distortion in a Fender comes from the power amp. Since the preamp is linear putting the reverb before the preamp is the same as putting it after preamp since linear systems are commutative, i.e. x + y = y + x. Also, our spring reverb algorithm has been updated recently and sounds better than before. I used our Fender '63 Reverb unit as the reference." source

"For authentic spring reverb sound you want the reverb in front of the amp block. A big reason spring reverbs sound the way they do is that they get colored by the amp." source

"The preamp of a Fender doesn't distort much, if at all. Therefore it can be considered linear. Linear systems are commutative. Therefore reverb before the amp is the same as reverb between the preamp and poweramp." source

"The reverb cannot be placed between the preamp and power amp. Doesn't matter though as putting the reverb before the amp block is the same thing for Fender amps because the preamp doesn't distort." source

About the order of Reverb and EQ:

"Reverb is linear time-invariant (LTI) which means it's commutative. IOW, you can put EQ before or after and it will sound the same. It doesn't add harmonics or overtones, by definition. Now our reverb algorithms aren't exactly LTI because they have modulation but they are "wide sense stationary" which means for all intents and purposes you can treat them as linear." source

"If there isn't distortion or modulation in the delay/reverb then the order is irrelevant since they are then Linear Time Invariant (or shift invariant in digital parlance). If there is a small amount of distortion or modulation then the order is probably still irrelevant. If there is a lot of distortion or modulation then the order may make a difference. However, typically the biggest difference, as noted above, is series vs. parallel since h1(t)*h2(t) is not the same as h1(t)+h2(t). If LTI h1*h2 = h2*h1. It may seem counter-intuitive that the order doesn't matter but try it and you'll be surprised." source

Read this: PRE and POST routing

Spillover

Spillover refers to the functionality to keeping the trails of the reverb audible after switching the effect off or switching presets, scenes, channels or X/Y. Read this: Spillover

Reverb and CPU usage

Reverb requires a lot of CPU power.

Higher quality modes (Economy, Normal, High, Ultra) increase CPU usage. The Economy and Ultra modes are available in firmware Ares for the Axe-Fx 3 and FM3 only.

"Reverb uses a ton of CPU. On Axe-Fx 3 the reverbs have a "Ultra" mode that makes them sound better at the cost of more CPU usage." source

If CPU usage on the AX8 and FX8 gets above 90%, the processor will start disabling blocks. Usually Reverb is first, because it tends to suck up the most CPU power.

On the FM3, amp modeling and reverb do NOT run on the same processor; this was true for an early beta version but not in the final release version.

Common methods to reduce CPU usage in the Reverb block: switch it to Normal Quality, reduce Density, or switch to Spring Reverb (uses the least amount of CPU).

Note: when an effect such as Reverb is automatically disabled because of CPU overload, audio passes through as if it were a shunt. If the Reverb is placed in a parallel row, this can cause a signal level issue.

Mono or stereo reverb

The signal at the input of the Reverb block (only the part for reverberation, not the passing-through signal) is summed to mono.

The Reverb's output is stereo (except Spring reverbs). You can make it mono by setting Stereo Width to 0%.

"Stereo imaging is not effected. The L/R summation is only into the reverb engine itself. The dry signal is unaffected." source

"The non-spring types create stereo." source

The FAS-FX Reverb plugin does not sum the input signal for reverberation to mono. It keeps and processes both sides in stereo.

Room ambience in Reverb block or Cab block

Room ambience is a type of reverb that recreates the ambience of a room. The Cab block in most of Fractal Audio's hardware processors provides this feature.

Firmware Ares added floor reflection modeling to room ambience.

"The intensity of the floor reflections can be adjusted with the new FLOOR REFLECTIONS parameter. Floor reflections play a large role in “amp in the room” sound. If the amp is on a carpet the floor reflections are minimal. If the amp is on a wood or other hard surface the floor reflections are significant. Existing presets will initialize this value to 0% so as to not change the sound. The default value is 50%. Note that negative values, while not realistic, are supported which inverts the reflection. MIC SPACING sets the stereo width of early reflections by simulating mic separation in the virtual space."

You can also use the regular Reverb block for simulating room ambience.

"The room stuff in the Cab block is a stripped-down, simplified version of the early reflections generator in the Reverb." source

"Frankly the best way to do it is to use the Early Reflections in the Reverb block to adjust your room level to taste. It's the same algorithm. The room stuff in the cab block is for those who add reverb in post-processing. The Early Reflections in the Reverb block are matched to the shape and size of the room so they are inherently better." source

"If you just want the "room" stuff turn the reverb level down and the early reflections level up." source

"The trick on the Axe-Fx to get room ambience is to do the following in the Reverb block:

  1. Set Predelay to 0
  2. Increase Early Level and/or decrease Late Level.
  3. Adjust Size and Mix to taste.

When Predelay is at zero, the Reverb block is simulating a room. Most of the Reverb presets have a bit of predelay because that is typically done on recordings to get the reverb "out of the way". Likewise the Early Reflections are mixed low because most engineers/producers find that they clutter the mix. Playing solo that "in the room" thing is cool but it makes the sound difficult to mix." source

(firmware Ares 2.05) "The early reflections in both the cab and reverb block were tweaked. The cab block now assumes a dipole radiator so the reflections off the front wall are inverted." source

Parameters

Parameters table

Parameter Axe-Fx III / FM3 Axe-Fx II AX8 / FX8
Input Select yes
Type yes
Time yes
Size yes
Pre-Delay yes
Early Level yes
Late Level yes
HF Decay Time, LF Decay Time yes
LF Crossover yes
Echo Density yes
Early Diffusion, Early Diffusion Time yes
Early Decay yes
Late Input Mix yes
Quality yes
Stack/Hold (firmware Ares 12 and later) yes
Wall Diffusion yes
Input Diffusion, Input Diffusion Time yes
Mic Spacing yes
Low Cut, High Cut yes
Freq 1/2, Q 1/2, Gain 1/2 yes
Mod: Depth, Rate yes
LFO Phase yes
Input Gain yes
Stereo Spread yes
Ducker: Threshold, Attenuation, Threshold yes
Spring: Number, Tone, Drive, Boiiinnng! yes

Mix

When using Mix to control the level of the Reverb, the volume level of the dry signal is affected: when increasing Mix, the dry signal's level decreases. The prevent this, turn up Mix to 50%, set Level to +3dB, and use Input Gain to set the desired amount of Reverb. Or, put Reverb in a parallel row with Mix at 100% and use Level or Input Gain to set the desired reverb level.

Quality

There are 3 "Quality" options in the Reverb block (firmware Ares 12 and later): Normal, High and Ultra-High. High quality uses significantly more CPU but provides world-class reverberation algorithms. Ultra-High increases modulation at the expense of a slight increase in CPU usage. In most situations, especially live, Normal Quality already provides the desired results. Most listeners won't notice any difference.

The Spring Reverb type doesn't have the Quality parameter.

The Axe-Fx II, FX8 and AX8 default to Normal Quality, where the Axe-Fx III defaults to High Quality. The FM3 defaults to Normal Quality.

"Reverb uses a ton of CPU. On Axe-FX3 the reverbs have a "Hi Quality" mode that makes them sound better at the cost of more CPU usage." source

”In the Reverb block it selects a more advanced algorithm.“ source

Time

Maximum Reverb Time is 100 seconds in firmware Ares.

Stack/Hold

When Hold is activated, the wet input to the block is muted and Time is set to infinity. This can be used to achieve pad sounds and drone notes/chords.

By attaching an external controller to Hold, an external pedal or switch can be used to control this "freeze" feature.

Tutorial by Cooper Carter for G66

"It requires a lot of calculations to change the Reverb time which is what Hold does (it increases it to a couple hours or something). If CPU use is high the calculations won't finish during one block which results in a click." source

"When activating reverb hold the time is increased to infinity. This causes a bunch of stuff to be recalculated which can cause a click. I'll have to look into it." source

Firmware Ares 12 added the "Stack" feature:

"Added Stack/Hold parameter to Plex Delay and Plex Verb types in the Plex block. When set to STACK incoming audio is stacked on existing audio and held. When set to HOLD existing audio is held."

When attaching a pedal to Off/Stack/Hold, Heel is Off, Stack is middle and Toe is Hold.

Early Diffusion

This sets the amount of diffusion in the early reflections. Higher values result in fuzzier and less distinct echoes. Lower values result in sharp, distinct reflections.

Early Diff Time

This scales the delay time of the early reflections diffusers. Adjust this control to suit the size and character of the simulated environment.

Late Diffusion

This parameter has been renamed Input Diffusion in firmware Ares.

Early Decay

This controls the decay rate of the early reflections. Higher values yield faster decay.

The reverb tail is automatically set to the appropriate delay. In High Quality mode an additional parameter is available: Late Input Mix. This parameter controls the mix between the (possibly diffused) input and the early reflections data input to the late reverb algorithm. Thus this parameter mixes the output of the diffuser and the early reflections prior to inputting that data to the late reverb generator. With the Late Input Mix at 0% the High Quality mode is identical to the Normal Quality mode. Values greater than 0% mix early reflections data into the late reverb using a proprietary decorrelation technique which eliminates any metallic qualities associated with the typical diffuser techniques used in other products.

Spread

Values beyond +/-100% increase the apparent image beyond the stereo field.

Low Freq Time and High Freq Time

"These set the decay time relative to the midband time for the low frequencies and high frequencies. If you set the Time to, say, 10 seconds and High Freq Time to 0.1 the high frequencies will decay to -60 dB in 1 second." source

"The reverb tail is divided into three bands. The low-frequency band is defined by LF Xover and LF Time. LF Xover sets the crossover frequency between the low and mid bands. LF Time controls the decay time of the low band relative to the mid band. So if LF Time is 2.0 the low-frequency decay time will be twice as long as the mid-band time. You may be able to use this to reduce low-frequency buildup. High-frequency decay time works a bit differently. There is a single HF Time parameter. It controls the high-frequency absorption of the virtual room. The lower the value the faster the high frequencies decay relative to mid-band. A value of 1.0 means no high-frequency absorption. The EQ page then controls equalization of the resulting tail. You can further shape the sound of the reverb using this, if desired. Real rooms tend to have a slightly longer low-frequency decay and a shorter high-frequency decay. However if you're using LOTS of simulated reverb within a real reverberant environment then you can get low-frequency buildup. The tips above should help you adjust to the environment." source

Rev Mix (Global Menu)

The Rev Mix parameter in the Global menu lets you increase or decrease the Reverb Mix level across all presets at once. This lets you set the amount of reverb based on the environment.

"Global Reverb and Effects Mix are relative. If set to 0% the mix is set by the preset. If set to, say, -10% the mix would be 10% less than the preset mix.” source

Note that Rev Mix may not work well with Reverb blocks in parallel rows which have Mix at 100%.

Effects Mix is another Global parameter that boosts or cuts the Mix value of all blocks for which the GLOBAL MIX parameter is set to “ON”.

Tips and tricks

Alternative reverb effects

Turn up Diffusion in the Delay block to smear the delays trails and turn it into reverb.

Select Plex Verb in the Plex Delay block for ambient reverb.

Gated reverb

Try the factory preset "Gated Reverb".

More information on the user forum:

More information