Always consult the official Owners Manuals first
Mixer block
Contents
Available on which products
- Axe-Fx III: 4 blocks
- FM3: 4 blocks
- FM9: 4 blocks
- Axe-Fx II: 2 blocks
- AX8: no
- FX8: no
Channels or X/Y
- Axe-Fx III and FM9 and FM3: 4 channels
- Axe-Fx II XL and XL+: X/Y
- Axe-Fx II Mk I and II: no
Mixer block
The standalone Mixer block(s) can be used to mix and route signals on the grid.
The block can't be bypassed and doesn't support Global blocks.
For routing purposes, attach an external controller (switch) to the Mixer.
Example: operating the pedal or switch can enable one row (effect) and bypass another. This lets you use a single pedal to operate as a Wah (Wah block) or a Whammy (Pitch block), or crossfade between Amp blocks, similar to the Multiplexer block. Crossfading is something that the Mixer can accomplish and Channels cannot.
Unlike the Multiplexer block, the Mixer can handle multiple inputs simultaneously.
Read this:
Mixer in the Output block
Each Output block also has basic mixer controls. These let you set the overall output level of the preset and the relative levels of the grid rows, per scene.
Read this:
