Mixer block

The information on this page supplements the official manuals.

Image to be added

Mixer block: supported by which products

• Axe-Fx III: 4x.
• Axe-Fx II: 2x.
• AX8: no.
• FX8: no.

Mixer: X/Y switching or channels

• Axe-Fx III: 4 channels.
• Axe-Fx II XL and XL+: yes.
• Axe-Fx II Mk I and II: no.
• AX8: n/a.
• FX8: n/a.

Mixer in the Output block

Each preset has an output mixer. The Axe-Fx III has an output mixer in every output block. The mixer controls the overall output level of the preset. Its setting can be different for each preset scene. The MIDI-controlled commands VOL INCR and VOL DECR adjust this level.

Mixer as a separate block

The Axe-Fx II and III provide dedicated Mixer blocks, which can be used to route and adjust the signal on the grid.

Mixer block in the first column

A Mixer block in the first column on the grid operates differently. Only Gain and Balance for the first row are functional, the other settings are ignored.

Mixer as a routing tool

Attach an external controller (switch) to the Mixer for routing purposes.

Example: operating the pedal or switch can enable one row (effect) and bypass another. This lets you use a single pedal to operate as a Wah (Wah block) or a Whammy (Pitch block). More examples.