Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Input block"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 53: Line 53:
 
* If Output is connected to Input and Input is bypassed: the signal is passed without going through the loop.
 
* If Output is connected to Input and Input is bypassed: the signal is passed without going through the loop.
 
* If Output is connected to Input and Input is engaged: the signal from the effect loop is passed.
 
* If Output is connected to Input and Input is engaged: the signal from the effect loop is passed.
 +
 +
=Input impedance=
 +
 +
Read this: [[Input impedance]]
  
 
=Input blocks and Global Blocks=
 
=Input blocks and Global Blocks=
  
Only Input 1 can be configured as a Global Block.  
+
Only Input 1 can be configured as a Global Block.
  
 
=Input blocks and noise gates=
 
=Input blocks and noise gates=

Revision as of 13:31, 19 April 2019

Iii ins and outs.jpg

Available on which products

  • Axe-Fx III: 5 blocks
  • Axe-Fx II: 1 block
  • AX8: 1 block
  • FX8: no

Channels or X/Y switching

  • Axe-Fx III: 4 channels
  • Axe-Fx II: no
  • AX8: no
  • FX8: n/a

About the Input block

The Input block is the point where the signal enters the grid for processing by effect blocks.

The Input block also provides:

On the Axe-Fx III, an Input block can also operate as Effects Return in an effects loop. The signal is sent to an external device through an Output block (= Effects Send) and then re-enters the grid through the Input block (= Effects Return).

Input blocks and signal sources

The Input blocks are linked to the hardware input ports, except Input 1.

Input 1 can be linked to:

  • Analog input (Instrument/Input 1)
  • USB outputs 5+6 from computer
  • SPDIF or AES input

There's a 5th Input block, which is the Input USB block. It gets its signal from USB Outputs 7+8 from a computer.

Position of the Input block on the grid

Axe-Fx II and AX8 — the Input block has a fixed position at the start of the grid

Axe-Fx III — Input blocks can be positioned anywhere on the grid.

Bypass state

If the Input block on the Axe-Fx III is bypassed, it prevents external signals from entering the grid. When engaged, it doesn't pass signal from blocks which are connected to it (in front of the Input block).

Running Input and Output blocks as an effect loop

  • If Output is not connected to Input and Input is bypassed: the signal from the loop is muted.
  • If Output is connected to Input and Input is bypassed: the signal is passed without going through the loop.
  • If Output is connected to Input and Input is engaged: the signal from the effect loop is passed.

Input impedance

Read this: Input impedance

Input blocks and Global Blocks

Only Input 1 can be configured as a Global Block.

Input blocks and noise gates

Each Input block has its own noise gate settings. On the Axe-Fx III this includes EMI filtering.

Read this: Noise gate

Parameters

Parameter Axe-Fx III Axe-Fx II AX8, FX8
Noise Gate
Threshold yes
Ratio yes
Attack yes
Release yes
Output Level yes
Gate Type yes