Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Global blocks"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 76: Line 76:
 
'''FM3''' — not yet known.
 
'''FM3''' — not yet known.
  
=Backing up presets with Global Blocks=
+
=Back up presets with Global Blocks=
  
 
When using [[Fractal-Bot]] to create backups of presets with Global Blocks, you need to backup system data too, because that's where the global blocks data is stored.
 
When using [[Fractal-Bot]] to create backups of presets with Global Blocks, you need to backup system data too, because that's where the global blocks data is stored.

Revision as of 12:31, 5 May 2019

Global blocks.png

Available on which products

  • Axe-Fx III: 8 global blocks per effect instance (not all effects)
  • FM3: no
  • Axe-Fx II: 10 global blocks per effect instance
  • FX8: no
  • AX8: no

"The AX8 was not designed for use with Global Block, and there are no plans to add them." source

"The FX8 was not designed for use with Global Block, and there are no plans to add them." source

What are Global Blocks

Read this:

Axe-Fx III:

There are 8 Global Blocks per effect instance. Not all effects support Global Blocks (e.g. Mixer, RTA, Ring Modulator, Ten-Tap Delay do not). Global Block operations are accessible from the Tools page in the Layout menu and in the software editor. There are several operations associated with a Global Block:

Link To – links the selected effect with a Global Block. The Global Block data is NOT loaded. Upon saving the preset the Global Block is saved. Any other presets linked to this Global Block will load the Global Block data upon recall.
Load From – loads data from a selected Global Block but does NOT link the block.
Link To and Load From – links an effect to a Global Block AND loads data from the Global Block. Upon saving the preset the Global Block is saved. Any other presets linked to this Global Block will load the Global Block data upon recall.
Unlink – unlinks the current effect from any Global Blocks.
Unlink All Blocks From Global – unlinks all blocks from any global blocks to which they may be linked.

FM3:

Not yet known...

Reset before editing

When you've saved a block as a Global Block, and you're going to dial in a channel of that block that hasn't been tweaked before, the channel's initial settings may be way off. Reset the channel before tweaking to make sure that everything (including hidden settings) is set to default.

Save a Global Block

After adding or editing a Global Block, the preset needs to be saved.

If you've changed settings in one of the 8 instances of a Global Block, always save the preset first before loading another instance of that block, otherwise you'll lose your edits. In other words: you can not edit several instances of the Global Block and then save the preset to save them all; you must save "per instance".

Unlink a Global Block

To unlink a block from Global Blocks, use any of these methods:

Axe-Fx II:

  • Global Block menu on the hardware
  • execute STRIP ALL GLOBAL DATA in the Utility menu on the hardware
  • press Enter in the Recall menu on the hardware
  • use the editor

Axe-Fx III:

  • use Layout > Tools on the hardware
  • use the editor
  • NOTE: currently only the hardware provides a command to unlink all Global Blocks in the current preset in one go.

FM3:

Not yet known...

Share a preset with Global Blocks

To share a preset that contains Global Blocks, you have to either send the System file along with it, or unlink all Global Blocks first.

Axe-Fx III — currently only the hardware provides a command to unlink all Global Blocks in the current preset in one go.

FM3 — not yet known.

Back up presets with Global Blocks

When using Fractal-Bot to create backups of presets with Global Blocks, you need to backup system data too, because that's where the global blocks data is stored.

Creating Snapshots of presets with Global Blocks

Be aware that when you create a Snapshot of a preset with Global Blocks using the software editor, the Global Blocks data is not included.

Global Blocks and modifiers

Modifiers are not included in Global Blocks data.

This means that when you link a block to an existing Global Block instance, modifier settings will not be recalled.

You can copy and paste modifier settings from another preset using the editor.

On the Axe-Fx II, you can also use the Recall Effect feature on the hardware to copy modifiers from one preset to another.

Setting the Bypass state of a (Global) block across all presets

The Bypass state of a Global Block is saved per preset, not across all presets.

If you want systemwide control of the bypass state of an effect block, here's a solution:

  1. Attach the Bypass parameter of the effect block to an External controller.
  2. In the I/O menu, switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
  3. This works with Global and non-Global Blocks, and across all presets with the same effect block.

Repairing broken links to Global Blocks

New firmware can sometimes break Global Blocks unfortunately. This can happen when the firmware includes low-level changes, which lead to a new preset revision.

To restore the global link, each preset that contains Global Blocks needs to be re-saved in order to update the preset to the latest revision. Luckily, FracTool makes this easier; it allows you to automatically re-save presets (all, or a specified number).

Clearing Global Blocks

There's no method (hardware nor software) provided to clear or reset single or all Global Block slots.