Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Global blocks"

From Fractal Audio Wiki
Jump to navigation Jump to search
m (edited for quoting)
 
(132 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
[[image:Global blocks.png|link=]]
+
 
 
=Available on which products=
 
=Available on which products=
  
* '''Axe-Fx III''': 8 global blocks per effect instance (not all effects)
+
* '''Axe-Fx III''': 8 global blocks per effect instance (not all effect blocks)
* '''FM3''': no
+
* '''FM3''' and '''FM9''': no
 
* '''Axe-Fx II''': 10 global blocks per effect instance
 
* '''Axe-Fx II''': 10 global blocks per effect instance
* '''FX8''': no
+
* '''FX8''' and '''AX8''': no
* '''AX8''': no
 
  
<blockquote>"The AX8 was not designed for use with Global Block, and there are no plans to add them." [http://forum.fractalaudio.com/threads/no-global-blocks.108864/#post-1302595 source] </blockquote>
+
<blockquote>
 +
'''FRACTAL AUDIO QUOTES'''
 +
<HR>
  
<blockquote>"The FX8 was not designed for use with Global Block, and there are no plans to add them." [http://forum.fractalaudio.com/threads/global-blocks.103943/#post-1302596 source] </blockquote>
+
<blockquote>
 +
[http://forum.fractalaudio.com/threads/no-global-blocks.108864/#post-1302595]
 +
The AX8 was not designed for use with Global Block, and there are no plans to add them.
 +
</blockquote>
  
=What are Global Blocks=
+
<blockquote>
 +
[http://forum.fractalaudio.com/threads/global-blocks.103943/#post-1302596]
 +
The FX8 was not designed for use with Global Block, and there are no plans to add them.
 +
</blockquote>
 +
</blockquote>
  
[[Owners_Manuals|Owner's Manual]]
+
=About Global blocks=
  
[https://forum.fractalaudio.com/threads/wicked-wiki-14-global-blocks.49554/ Wicked Wiki thread]
+
Global blocks carry over parameter changes to other presets.
  
'''Axe-Fx III''':
+
Not all effect blocks support Global blocks. Of the Input blocks, only Input 1 supports Global blocks.
  
There are 8 Global Blocks per effect instance. Not all effects support Global Blocks. Also, only Input 1 supports Global Blocks. The other Input and Output blocks do not support it.
+
These blocks do NOT support Global blocks on the Axe-Fx III:
  
Blocks which do NOT support Global Blocks:
 
 
* Crossover
 
* Crossover
* Send/Return
 
 
* IR Player
 
* IR Player
 
* Looper
 
* Looper
 
* Megatap Delay
 
* Megatap Delay
* Scene MIDI
 
 
* Mixer
 
* Mixer
 
* Multiband Compressor
 
* Multiband Compressor
 
* Multiplexer  
 
* Multiplexer  
 +
* Output
 
* RTA
 
* RTA
 
* Resonator
 
* Resonator
 +
* Scene MIDI
 +
* Send/Return
 
* Synth
 
* Synth
 
* Ten Tap Delay
 
* Ten Tap Delay
 
* Vocoder
 
* Vocoder
  
Global Block operations are accessible from the Tools page in the Layout menu and in the software editor. There are several operations associated with a Global Block:
+
You can read more in the [[Owners_Manuals|Owner's Manual]].
 +
 
 +
=Working with Global blocks=
  
:'''Link To''' – links the selected effect with a Global Block. The Global Block data is NOT loaded. Upon saving the preset the Global Block is saved. Any other presets linked to this Global Block will load the Global Block data upon recall
+
==Operations==
  
: '''Load From''' – loads data from a selected Global Block but does NOT link the block
+
Global block operations are accessible from the Tools page in the Layout menu and in the editors. There are several operations associated with Global blocks:
  
: '''Link To and Load From''' – links an effect to a Global Block AND loads data from the Global Block. Upon saving the preset the Global Block is saved. Any other presets linked to this Global Block will load the Global Block data upon recall
+
; Link To : Links the selected effect with a Global block. The Global block data is NOT loaded. Upon saving the preset the Global block is saved. Any other presets linked to this Global block will load the Global block data upon recall.
 +
; Load From : Loads data from a selected Global block but does NOT link the block.
 +
; Link To and Load From : Links an effect to a Global block AND loads data from the Global block. Upon saving the preset the Global block is saved. Any other presets linked to this Global block will load the Global block data upon recall.
 +
; Unlink : Unlinks the current effect from any Global blocks.
 +
; Unlink All Blocks From Global : Unlinks all blocks from any Global blocks to which they may be linked.
  
: '''Unlink''' – unlinks the current effect from any Global Blocks
+
==Reset before editing==
  
: '''Unlink All Blocks From Global''' – unlinks all blocks from any global blocks to which they may be linked
+
When you've saved a block as a Global block, and you're going to dial in a channel of that block that hasn't been tweaked before, the channel's initial settings may be way off. Reset the channel before tweaking to make sure that everything, including hidden settings, is set to default.
  
=Reset before editing=
+
==Save==
  
When you've saved a block as a Global Block, and you're going to dial in a channel of that block that hasn't been tweaked before, the channel's initial settings may be way off. Reset the channel before tweaking to make sure that everything (including hidden settings) is set to default.
+
After adding or editing a Global block, the preset needs to be saved.  
  
=Save a Global Block=
+
If you've changed settings in one of the eight instances of a Global block, always save the preset first before loading another instance of that block, otherwise you'll lose your edits. In other words: you can not edit several instances of the Global block and then save the preset to save them all; you must save <q>per instance</q>.
  
After adding or editing a Global Block, the preset needs to be saved.
+
==Unlink==
  
If you've changed settings in one of the 8 instances of a Global Block, always save the preset first before loading another instance of that block, otherwise you'll lose your edits. In other words: you can not edit several instances of the Global Block and then save the preset to save them all; you must save "per instance".
+
To unlink a block from Global blocks, use any of these methods:
  
=Unlink a Global Block=
+
'''Axe-Fx III:'''
  
To unlink a block from Global Blocks, use any of these methods:
+
* Use Layout > Tools on the hardware.
 +
* Use the editor.
  
 
'''Axe-Fx II:'''
 
'''Axe-Fx II:'''
  
* use the Global Block menu on the hardware
+
* Use the Global block menu on the hardware.
* execute STRIP ALL GLOBAL DATA in the Utility menu on the hardware
+
* Execute STRIP ALL GLOBAL DATA in the [[Utilities menu]].
* press Enter in the Recall menu on the hardware
+
* Press Enter in the Recall menu on the hardware.
* use the editor
+
* Use the editor.
  
'''Axe-Fx III:'''
+
==Share==
 +
To share a preset that contains Global blocks, you have to either send the system data file along with it, or unlink all Global blocks before exporting to disk.
 +
 
 +
==Clear==
 +
 
 +
There's no hardware or software system setting to wipe all Global blocks. The only way to accomplish this, is to restore a backup of factory default system data, AKA a clean system file. Ask for this on the forum.
  
* use Layout > Tools on the hardware
+
==Backup and restore==
* use the editor
 
* NOTE: currently only the hardware provides a command to unlink all Global Blocks in the current preset in one go
 
  
'''FM3:'''
+
When using [[Fractal-Bot]] to create backups of presets that contain Global blocks, you need to backup the system data too, because that's where the Global blocks data is stored.
  
to be added... @@
+
Alternatively, here's a method to save individual Global blocks:
  
=Share a preset with Global Blocks=
+
# Create a single preset with all your Global blocks.
 +
# Save that to backup preset slots.
 +
# In the first backup slot, set the blocks to global instance 1, unlink the globals and save the preset.
 +
# In the second backup slot, set selected blocks to global instance 2 (only the ones which use instance 2), unlink the globals and save the preset.
 +
# Repeat for subsequent blocks.
  
To share a preset that contains Global Blocks, you have to either send the System data file along with it, or unlink all Global Blocks before exporting to disk.
+
If something goes wrong and you need to restore an individual block or channel, just copy the block or channel from the appropriate backup preset, paste it into a preset with linked blocks using the correct global instance and save it.
  
=Back up presets with Global Blocks=
+
=Troubleshooting, tips and tricks=
  
When using [[Fractal-Bot]] to create backups of presets with Global Blocks, you need to backup the System data too, because that's where the Global Blocks data is stored.
+
==Editor snapshots==
  
=Snapshots and Global Blocks=
+
Be aware that when you use the editor to create a snapshot of a preset with Global blocks, the Global blocks data is not included in the snapshot.
  
Be aware that when you create a [[Editors#Snapshot|Snapshot]] of a preset with Global Blocks in the [[Editors|editor]], the Global Blocks data is not included.
+
==Modifiers==
  
=Global Blocks and modifiers=
+
[[Controllers and modifiers|Modifiers]] are not included in Global blocks. When you link a block to an existing Global block instance, modifier settings will not be included/applied.
  
Modifiers are not included in Global Blocks data. This means that when you link a block to an existing Global Block instance, modifier settings will not be included/applied.
+
You can copy and paste a block, including modifier settings, from another preset using the editor.
  
You can copy and paste modifier settings from another preset using the [[Editors|editor]].
+
Recalling a block form the [[Library]] also includes the modifier settings.
  
 
On the Axe-Fx II, you can also use [[Presets#Recall_Effect|Recall Effect]] on the hardware to copy modifiers from one preset to another.
 
On the Axe-Fx II, you can also use [[Presets#Recall_Effect|Recall Effect]] on the hardware to copy modifiers from one preset to another.
  
=Set the Bypass state of a (Global) block across all presets=
+
==Set bypass state across all presets==
  
The bypass state of a Global Block is saved per preset, not across all presets.
+
Read <q>[[Presets#Set_Bypass_state_across_all_presets|Presets]]</q> for a method to control the bypass state of effects blocks across presets.
  
If you want systemwide control of the bypass state of an effect block, here's a solution:
+
==Alternative for Global blocks==
  
# Attach the Bypass parameter of the effect block to an External controller.
+
The editors provide a substitute for Global blocks. See <q>[[Editors#Parameter_Batch_Set|Parameter Batch Set]]</q> for more information.
# In the [[I/O menu]], switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
 
# This works with Global and non-Global Blocks, and across all presets with the same effect block.
 
  
=Repair broken links to Global Blocks=
+
=Tips, tricks and troubleshooting=
  
In rare cases, installing new firmware may break Global Blocks, unfortunately. This can happen when the firmware includes low-level changes, which lead to a new preset revision.
+
New firmware brings new features to blocks. This can cause a parameter in a Global block to stick to its old value, and become out of sync and not update across presets. To fix this, each preset that contains that Global block needs to be re-saved in order to update the preset to the latest revision. Luckily, [[FracPad and FracTool|FracTool]] or the Parameter Batch Set function in the editor (see above) make this easier; they allow you to automatically re-save presets, either all, or a specified number.
  
To restore the links, each preset that contains Global Blocks needs to be re-saved in order to update the preset to the latest revision. Luckily, [[FracTool]] makes this easier; it allows you to automatically re-save presets (all, or a specified number).
+
The system uses internal storage to save the Global blocks data. It's possible to exceed the available storage space. In that case the system will no longer save additional Global blocks, or all values will be reset to minimum. So use them wisely.
  
=Clear all Global Blocks=
+
=Videos=
  
There's no method (hardware nor software) provided to clear the system of all Global Block slots, or reset all Global Block instances.
+
[[video:GregSummers-Globals]]
  
 
[[category:Axe-Fx3]]
 
[[category:Axe-Fx3]]
 
[[category:Axe-Fx2]]
 
[[category:Axe-Fx2]]
 
[[category:Sounds]]
 
[[category:Sounds]]
 +
[[category:All]]

Latest revision as of 18:23, 22 March 2024

Available on which products

  • Axe-Fx III: 8 global blocks per effect instance (not all effect blocks)
  • FM3 and FM9: no
  • Axe-Fx II: 10 global blocks per effect instance
  • FX8 and AX8: no

FRACTAL AUDIO QUOTES


[1] The AX8 was not designed for use with Global Block, and there are no plans to add them.

[2] The FX8 was not designed for use with Global Block, and there are no plans to add them.

About Global blocks

Global blocks carry over parameter changes to other presets.

Not all effect blocks support Global blocks. Of the Input blocks, only Input 1 supports Global blocks.

These blocks do NOT support Global blocks on the Axe-Fx III:

  • Crossover
  • IR Player
  • Looper
  • Megatap Delay
  • Mixer
  • Multiband Compressor
  • Multiplexer
  • Output
  • RTA
  • Resonator
  • Scene MIDI
  • Send/Return
  • Synth
  • Ten Tap Delay
  • Vocoder

You can read more in the Owner's Manual.

Working with Global blocks

Operations

Global block operations are accessible from the Tools page in the Layout menu and in the editors. There are several operations associated with Global blocks:

Link To 
Links the selected effect with a Global block. The Global block data is NOT loaded. Upon saving the preset the Global block is saved. Any other presets linked to this Global block will load the Global block data upon recall.
Load From 
Loads data from a selected Global block but does NOT link the block.
Link To and Load From 
Links an effect to a Global block AND loads data from the Global block. Upon saving the preset the Global block is saved. Any other presets linked to this Global block will load the Global block data upon recall.
Unlink 
Unlinks the current effect from any Global blocks.
Unlink All Blocks From Global 
Unlinks all blocks from any Global blocks to which they may be linked.

Reset before editing

When you've saved a block as a Global block, and you're going to dial in a channel of that block that hasn't been tweaked before, the channel's initial settings may be way off. Reset the channel before tweaking to make sure that everything, including hidden settings, is set to default.

Save

After adding or editing a Global block, the preset needs to be saved.

If you've changed settings in one of the eight instances of a Global block, always save the preset first before loading another instance of that block, otherwise you'll lose your edits. In other words: you can not edit several instances of the Global block and then save the preset to save them all; you must save per instance.

Unlink

To unlink a block from Global blocks, use any of these methods:

Axe-Fx III:

  • Use Layout > Tools on the hardware.
  • Use the editor.

Axe-Fx II:

  • Use the Global block menu on the hardware.
  • Execute STRIP ALL GLOBAL DATA in the Utilities menu.
  • Press Enter in the Recall menu on the hardware.
  • Use the editor.

Share

To share a preset that contains Global blocks, you have to either send the system data file along with it, or unlink all Global blocks before exporting to disk.

Clear

There's no hardware or software system setting to wipe all Global blocks. The only way to accomplish this, is to restore a backup of factory default system data, AKA a clean system file. Ask for this on the forum.

Backup and restore

When using Fractal-Bot to create backups of presets that contain Global blocks, you need to backup the system data too, because that's where the Global blocks data is stored.

Alternatively, here's a method to save individual Global blocks:

  1. Create a single preset with all your Global blocks.
  2. Save that to backup preset slots.
  3. In the first backup slot, set the blocks to global instance 1, unlink the globals and save the preset.
  4. In the second backup slot, set selected blocks to global instance 2 (only the ones which use instance 2), unlink the globals and save the preset.
  5. Repeat for subsequent blocks.

If something goes wrong and you need to restore an individual block or channel, just copy the block or channel from the appropriate backup preset, paste it into a preset with linked blocks using the correct global instance and save it.

Troubleshooting, tips and tricks

Editor snapshots

Be aware that when you use the editor to create a snapshot of a preset with Global blocks, the Global blocks data is not included in the snapshot.

Modifiers

Modifiers are not included in Global blocks. When you link a block to an existing Global block instance, modifier settings will not be included/applied.

You can copy and paste a block, including modifier settings, from another preset using the editor.

Recalling a block form the Library also includes the modifier settings.

On the Axe-Fx II, you can also use Recall Effect on the hardware to copy modifiers from one preset to another.

Set bypass state across all presets

Read Presets for a method to control the bypass state of effects blocks across presets.

Alternative for Global blocks

The editors provide a substitute for Global blocks. See Parameter Batch Set for more information.

Tips, tricks and troubleshooting

New firmware brings new features to blocks. This can cause a parameter in a Global block to stick to its old value, and become out of sync and not update across presets. To fix this, each preset that contains that Global block needs to be re-saved in order to update the preset to the latest revision. Luckily, FracTool or the Parameter Batch Set function in the editor (see above) make this easier; they allow you to automatically re-save presets, either all, or a specified number.

The system uses internal storage to save the Global blocks data. It's possible to exceed the available storage space. In that case the system will no longer save additional Global blocks, or all values will be reset to minimum. So use them wisely.

Videos