Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

FracPad and FracTool

From Fractal Audio Wiki
Jump to navigation Jump to search

FracPad III

About FracPad III

Forum member and programmer AlGrenadine provides a handy editing app for Fractal Audio's processors: FracPad III. It provides all the tools to adjust your sound, edit and manage presets, blocks etc, on a tablet, smartphone or computer.

It allows naming scenes, attaching modifiers to any parameter, displaying real world amp/drive panels, searching parameters by name, displaying a tuner based on the Axe-Fx III's tuner UI, selecting knob skins, importing presets which were made for other products, turning the metronome on/off, and many, many other things.

A connection to the device is required.

FracPad III is commercial software, available for Android v6.0+ and iOS. You can try the demo version FracPad Lite first.

For Windows and OS X, there's a free version.

Downloads:

More information is available at:

FracPad.jpg

Android version

Wired 
This requires a compatible USB adapter, called "USB OTG". This works with the AX8, FX8 and Axe-Fx II/III models.
Wireless 
Bluetooth. For bluetooth editing, use a Yamaha UD-BT01 on AX8/FX8 or a Yamaha MD-BT01 for AxeFx II/XL/XL+/III and FM3.

Axe-Fx II and iOS version

Wired 
Requires a MIDI-to-USB interface, because the USB port on the Axe-Fx II doesn't operate as USB host. Use a USB-to-MIDI interface like Roland's UM-One in conjunction with the "USB camera adapter" for Apple devices.
Wireless 
Bluetooth. The Yamaha MD-BT01 interface is recommended. It connects to the MIDI IN and OUT ports on the Axe-Fx II.

AX8 or FX8 and iOS version

Wired 
Requires a USB connection, because the AX8 and FX8 do not support editing through MIDI. Use the "USB camera adapter" for Apple devices.
Wireless 
Bluetooth. Try Yamaha's UD-BT01 interface and verify that it runs firmware 1.04 or later (run the Yamaha UD/MD utility, available in the US / Canadian app store).

Axe-Fx III and iOS version

Wired 
Requires a USB connection. Use the "USB camera adapter" for Apple devices.
Wireless 
Bluetooth. Try Yamaha's MD-BT01 interface and verify that it runs firmware 1.04 or later (run the Yamaha UD/MD utility, available in the US / Canadian app store).

Axe-Fx II, AX8 or FX8 and iOS version

A Bluetooth connection requires Bluetooth LE (Low Energy), so make sure that the iOS device handles Bluetooth 4.0+. This requires at least an iPad 3 or iPhone 4s. [1]

FM3 and iOS version

Wired 
Requires a MIDI-to-USB interface, because the USB port on the FM3 doesn't operate as USB host. Use a USB-to-MIDI interface like Roland's UM-One in conjunction with the "USB camera adapter" for Apple devices.
Wireless 
Bluetooth. The Yamaha MD-BT01 interface is recommended. It connects to the MIDI IN and OUT ports on the FM3.

FM9 and iOS version

Wired 
Requires a USB connection. Use the "USB camera adapter" for Apple devices.
Wireless 
Bluetooth. Try Yamaha's MD-BT01 interface and verify that it runs firmware 1.04 or later (run the Yamaha UD/MD utility, available in the US / Canadian app store).

FracTool (discontinued)

About FracTool

Forum member and programmer AlGrenadine wrote a handy utility for Fractal Audio's processors called FracTool, but it was discontinued in November 2023. You can still use it, at your own risk.

FracTool manages presets and cabs and does a lot more. It works with and without a connection to the processor.

FracTool is donationware. Don't forget to make a donation if FracTool helps you accomplishing things.

For a list of its features, check the download thread above. Below is a shortlist:

FracTool.png

Axe-Fx II and AX8

Conversion of presets between FAS devices

  • Opens Axe-Fx II XL and XL+ presets on Axe-Fx II and Mark II devices, and performs offline conversion
  • Opens Axe-Fx II presets on AX8 and FX8 devices, and vice versa, and performs offline conversion
  • Converts Tone Match data, exports to WAV
  • Converts Preset/Cab bundles
  • Converts Block files
  • Strips Global Block data

Auditioning and viewing

  • Shows the list of cabs being used by presets
  • Lists the presets in which a specific cab is being used
  • Shows the layout of a preset, online and offline
  • Shows a block parameters, online and offline
  • Exports blocks from a preset
  • Auditions single or multiple presets, cabs, and banks
  • Creates banks from presets, converts banks into presets
  • Renames presets and cabs
  • Auto-auditions presets and cabs by using a timer

Amp models

  • Compares amp models without changing parameters
  • Resets specific parameters

Batch Setter

  • Set, increase, or decrease a parameter in multiple presets

Other

  • Exports grid and parameters values to PDF, CSV, XML or HTML
  • Supports Axe-Change
  • Auto-updates itself
  • Supports ZIP-files

Check the forum thread for an actual list of features

Axe-Fx III

Same support as for the Axe-Fx II and more.

FracTool can convert FM3/Axe-Fx II/XL/XL+ presets and AX8 and FX8 presets, to make them load in the Axe-Fx III, however parameters and values may not transfer correctly. Backwards conversion is not supported.

FM3 and FM9

Same support as for the Axe-Fx III.

FX8

FracTool supports the FX8. There are limitations because of differences in the architecture of the FX8:

  • Parallel paths are not processed when converting to Axe-Fx and AX8
  • Only the first 8 blocks of Axe-Fx and AX8 presets are processed when converting to FX8

Videos