Always consult the official Owners Manuals and Guides first.
Information about the FM3 may be incomplete or wrong, it's being worked on.

Difference between revisions of "Firmware release notes - FM3"

From Fractal Audio Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
[[image:Icon-firmware.png|link=]]
 
[[image:Icon-firmware.png|link=]]
 +
 +
=1.05=
 +
 +
Minor Amp block optimizations.​
 +
 +
Improved how Amp block and Delay block values are synchronized with FM3-Edit.​
 +
 +
Fixed Pitch block mix overriding custom settings.​
 +
 +
Eliminated scenes/presets “blip” while FM3-Edit is open (requires FM3-Edit 1.01.05 rc2).​
 +
 +
Improved fan control relies on actual CPU temperature vs. ambient temperature.​
 +
 +
Preset 000 will no longer occasionally be blank on startup.​
 +
 +
Default Scene will now be loaded correctly on preset change.​
 +
 +
MIDI clock synchronization with DAWs should now result in a consistent tempo.​
 +
 +
Fixed stability issues when 5-pin MIDI communications are active.​
 +
 +
MIDI/Remote channel changes should now operate as expected using CC messages.​
 +
 +
FC: Prevent stand-in switch from switching the view when Hold Function Mode is SWITCH UP.​
 +
 +
Additional improvements related to stability and performance.​
  
 
=1.04=
 
=1.04=

Latest revision as of 18:23, 1 July 2020

Icon-firmware.png

1.05

Minor Amp block optimizations.​

Improved how Amp block and Delay block values are synchronized with FM3-Edit.​

Fixed Pitch block mix overriding custom settings.​

Eliminated scenes/presets “blip” while FM3-Edit is open (requires FM3-Edit 1.01.05 rc2).​

Improved fan control relies on actual CPU temperature vs. ambient temperature.​

Preset 000 will no longer occasionally be blank on startup.​

Default Scene will now be loaded correctly on preset change.​

MIDI clock synchronization with DAWs should now result in a consistent tempo.​

Fixed stability issues when 5-pin MIDI communications are active.​

MIDI/Remote channel changes should now operate as expected using CC messages.​

FC: Prevent stand-in switch from switching the view when Hold Function Mode is SWITCH UP.​

Additional improvements related to stability and performance.​

1.04

CPU Performance improvements across all presets.

Added new amp types: Matchbox D-30 EF86, FAS Express, Triple Crest 2, Triple Crest 3, PVH 6160+ Crunch Bright, PVH 6160+ Clean Bright.

Block Updates (Find details in the Fractal Audio Systems Block Guide): Gate: Improved Downward Expander; Tremolo: Added Optical type; PEQ: Added Slope controls; Plex Delay: Added Stack/Hold, Reverb: Added Dispersion.

Improved FM3-Edit preset switching time when certain blocks are present.

Improved USB audio performance and stability, reduced recording latency.

Clarified polarity options under I/O: Pedal: Switch Settings.

Improved how the position of pedals is detected after startup.

Fixed “banner messages” on the Tools page of the layout menu.

Parameter values now update when changed via a modifier.

FM3-Edit now honors the global setting for “Default Scene”.

Fixed “Astable” LFO type.

Fixed audio drop in Shred Distortion type.

Fixed MIDI clock sync issues.

Scratchpads now properly initialize on boot.

Added “OUTPUT 2” as an option for “USB 3,4 Record Source”.

LEDs and Display will no longer flicker when FM3 is powered off with USB connected.

Fixed Copy/Paste Block and Channel errors for the Amp and Delay blocks.

Added ECONOMY mode to the Reverb (from Axe-Fx III v12.08). Pre-existing presets will default to this new setting, which produces excellent results at considerably reduced CPU.

FC: LED rings for Looper functions will now be OFF if the Looper is not in the preset.

FC: “LOOPER BLOCK NOT FOUND IN THIS PRESET” message now shown when appropriate.

FC: The “Advanced” switch page is no longer blank after the FC banner has been displayed.

FC: The Tuner now exits in all cases after using “Reveal Hold”.

FC: Loading Factory Default Layouts now correctly initializes Layout Link Views.

FC: Fixed stand in switches sometimes not responding to the first press.

FC: Fixed the Tuner display when activated from an FM3 footswitch.

FC: Stand in switches now honor the Hold Function Mode “SWITCH UP” setting.

1.03

Fixed an issue that was causing instability in some cases.

1.02

Added support for FM3-Edit Scene Manager.

Fix interaction of Global Scales with the FM3-Edit.

USB “DI” recording levels corrected.

Looper “Undo” now works as it does on the Axe-Fx III.

Preset storing is now faster.

Knob D on the HOME screen now changes the “FC View” within the current layout of the FM3.

When Tuner is assigned as a hold function, you can now exit the Tuner with a single tap.

The following blocks have been updated with changes from their counterparts on the Axe-Fx-III: Chorus, Compressor, Drive, Enhancer, Filter, Flanger, Formant, Gate, Graphic EQ, Input, Send, Return, Looper, Megatap, Phaser. The features and CPU usage of these blocks may have changed, and any presets that contain them should be checked.

Output2 Global EQ feature added to SETUP: Global Settings.

When using the “Output 2 Copy” feature (in SETUP: I/O) the options “INPUT 1” and “OUTPUT 1” now produce increased level at Out 2 to better match the level at Out 1 without.

FC: Stand-in switches now help prevent false triggering if no switch is plugged in.

FC: Display now shows looper “Record 2nd Press” function (OVERDUB, PLAY, or STOP).

FC: Tap tempo now works across all Views.

FC: “View” functions are now available when creating per-preset switches.

FC: Tap tempo now works when using a stand-in switch.

FC: “View Inc” and “View Dec” mini-LCD now works when when "Destination #" is selected.

FC: The MLM and certain View functions now work as intended on a connected FC-6.

FC: The main LCD will now display the correct first preset in the bank if the Global Setting for "Display Offset" is set to '1.'

1.01

Small changes to some amp types.

1.00

Initial firmware release on the first shipped units.

No release notes.