Always consult the official Owners Manuals first

Difference between revisions of "Filter block"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 32: Line 32:
 
* There's no dedicated Envelope Filter (Auto Wah) effect block. You can achieve this effect by attaching a [http://wiki.fractalaudio.com/axefx2/index.php?title=Internal_controllers:_ADSR,_Envelope,_LFO,_Pitch,_Sequencer LFO or Envelope] to a Filter (or Wah) block.
 
* There's no dedicated Envelope Filter (Auto Wah) effect block. You can achieve this effect by attaching a [http://wiki.fractalaudio.com/axefx2/index.php?title=Internal_controllers:_ADSR,_Envelope,_LFO,_Pitch,_Sequencer LFO or Envelope] to a Filter (or Wah) block.
 
* You'll find examples in [http://forum.fractalaudio.com/axe-fx-ii-wish-list/50092-envelope-filter.html this thread], [http://forum.fractalaudio.com/axe-fx-ii-discussion/62506-auto-wah-tip-2.html this thread] and [http://axechange.fractalaudio.com/index.php on Axe-Change]. Or try the Psychadelic Duck preset (Axe-Fx II).
 
* You'll find examples in [http://forum.fractalaudio.com/axe-fx-ii-wish-list/50092-envelope-filter.html this thread], [http://forum.fractalaudio.com/axe-fx-ii-discussion/62506-auto-wah-tip-2.html this thread] and [http://axechange.fractalaudio.com/index.php on Axe-Change]. Or try the Psychadelic Duck preset (Axe-Fx II).
 +
 +
=Notch=
 +
* Cliff: "Gain doesn't apply to a notch filter. Only frequency and Q are relevant." [http://forum.fractalaudio.com/threads/not-a-bug-filter-notch-gain-doesnt-do-anything.117689/#post-1403848 source]
  
 
[[category:Effect]]
 
[[category:Effect]]

Revision as of 05:49, 3 August 2016

Filter: supported by which Fractal Audio products?

  • Axe-Fx II: yes.
  • FX8: yes.
  • AX8: yes.

Filter applications

  • The Filter effect is a very versatile effect. Possible applications:
    • one-band equalizer.
    • boost the input of an amp block.
    • boost the signal level for leads.
    • high-pass or low-pass filter.
    • envelope filter.
  • Here's an example, emulating the Eric Clapton / Fender Mid-Boost:
    • Cliff: "Use the Filter block. Since the max boost is 25 dB set the filter order to 4th which will give you a maximum of 24 dB. Set the type to Peaking. Set freq to 500 Hz. Vary gain and Q to taste." source

Filter X/Y-switching

  • Support for X/Y-switching in the Filter block:
    • Axe-Fx II: no.
    • AX8: yes.
    • FX8: yes.

Variable-Q Filter

  • The Filter block provides Variable-Q EQ. Many “classic” graphic equalizers use variable-Q designs which may be more familiar to some users as opposed to constant-Q filters. In the Filter block this type is selected by choosing the “Peaking2” type.

Analog Shelving EQ

  • The Filter and block provides “Lowshelf 2” and “Highshelf 2” EQ types. These types recreate the analog shelving filters found on classic mixing consoles. These filters are somewhat quirky and exhibit “overshoot” which gives them a certain musical quality. Set the Q between 0.5 and 0.707 to recreate those classic sounds or experiment with the Q for different amounts of overshoot. These filter types are great for getting that massive sound associated with passive equalization.

Tilt EQ

  • Tilt EQ is a slope filter that allows broad adjustment of the tone using just two parameters: Frequency and Gain. The Gain parameter sets the maximum gain of the filter relative to the center frequency. For example, a gain of 10 dB would set the maximum gain to 10 dB. The gain at the center frequency would be 0 dB and the minimum gain would be -10 dB, therefore a total of 20 dB of EQ would be applied.

Creating an Envelope Filter

  • There's no dedicated Envelope Filter (Auto Wah) effect block. You can achieve this effect by attaching a LFO or Envelope to a Filter (or Wah) block.
  • You'll find examples in this thread, this thread and on Axe-Change. Or try the Psychadelic Duck preset (Axe-Fx II).

Notch

  • Cliff: "Gain doesn't apply to a notch filter. Only frequency and Q are relevant." source