Always consult the official Owners Manuals first

Difference between revisions of "Filter block"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 6: Line 6:
 
=Filter applications=
 
=Filter applications=
 
* The Filter effect is a very versatile effect. Possible applications:
 
* The Filter effect is a very versatile effect. Possible applications:
** One-band equalizer.
+
** one-band equalizer.
** Boost the input of an amp block.
+
** boost the input of an amp block.
** Boost the signal level for leads.
+
** boost the signal level for leads.
** High-pass or low-pass filter.
+
** high-pass or low-pass filter.
** Envelope filter.
+
** envelope filter.
  
 
=Filter X/Y-switching=
 
=Filter X/Y-switching=

Revision as of 16:48, 12 December 2015

Filter: supported by which Fractal Audio products?

  • Axe-Fx II: yes.
  • FX8: yes.
  • AX8: yes.

Filter applications

  • The Filter effect is a very versatile effect. Possible applications:
    • one-band equalizer.
    • boost the input of an amp block.
    • boost the signal level for leads.
    • high-pass or low-pass filter.
    • envelope filter.

Filter X/Y-switching

  • Support for X/Y-switching in the Filter block:
    • Axe-Fx II: no.
    • AX8: yes.
    • FX8: yes.

Variable-Q Filter

  • The GEQ, Filter and Amp blocks provide Variable-Q EQ types. Many “classic” graphic equalizers use variable-Q designs which may be more familiar to some users as opposed to constant-Q filters. In the Filter block this type is selected by choosing the “Peaking2” type. The Graphic EQ block now has four constant-Q modes and four variable-Q modes. The Amp block now has three constant-Q modes and three variable-Q modes.

Analog Shelving EQ in Filter

  • Filter and Parametric EQ blocks provide “Lowshelf 2” and “Highshelf 2” EQ types. These types recreate the analog shelving filters found on classic mixing consoles. These filters are somewhat quirky and exhibit “overshoot” which gives them a certain musical quality. Set the Q between 0.5 and 0.707 to recreate those classic sounds or experiment with the Q for different amounts of overshoot. These filter types are great for getting that massive sound associated with passive equalization."

Tilt EQ in Filter

  • The Tilt EQ is a slope filter that allows broad adjustment of the tone using just two parameters: Frequency and Gain. The Gain parameter sets the maximum gain of the filter relative to the center frequency. For example, a gain of 10 dB would set the maximum gain to 10 dB. The gain at the center frequency would be 0 dB and the minimum gain would be -10 dB, therefore a total of 20 dB of EQ would be applied.

Creating an envelope filter with Filter

  • There's no dedicated Envelope filter effect block. You can achieve this effect by attaching a LFO or Envelope to a Filter (or Wah) block.
  • You'll find examples in this thread, this thread and on Axe-Change. Or try the Psychadelic Duck preset (Axe-Fx II).