Always consult the official Owners Manuals and Guides first.
Information about the FM3 may be incomplete or wrong, it's being worked on.


From Fractal Audio Wiki
Revision as of 11:41, 5 February 2019 by Yek (talk | contribs) (What is FASLINK)
Jump to: navigation, search


FASLINK is a proprietary Fractal Audio communications link between the Axe-Fx series processors and the MFC-101 resp. FC controllers. FASLINK provides two-way communication through an XLR cable and phantom power. XLR cables (microphone cables) are common, flexible and robust, supporting runs of hundreds of feet.

FASLINK replaces previous connection methods (MIDI and Ethernet).

There are two versions of FASLINK:

  • FASLINK (original) – Connects the Axe-Fx II and MFC-101.
  • FASLINK II – Connects the Axe-Fx III and FC foot controller(s), featuring a new protocol. Length limit is 100 feet (source).


Which Fractal Audio products support FASLINK

Axe-Fx III – Built-in FASLINK II support.

Axe-Fx II XL and XL+ – Built-in FASLINK support.

Axe-Fx II Mark I and II – FASLINK adapter needed to convert wiring from Ethernet/Ethercon to XLR.

MFC-101 Mark III – Built-in FASLINK support.

MFC-101 Mark I and II – FASLINK adapter needed to convert wiring from Ethernet/Ethercon to XLR.

FC controllers – Built-in FASLINK II support.

Setting up FASLINK

Axe-Fx III – Connect the FASLINK cable between the Axe-Fx III and FC controller.

Axe-Fx II – Turn on FASLINK in the I/O menu.

MFC-101 – Select the correct port in the MFC settings. WARNING: do NOT connect a power supply to the MFC-101 when using FASLINK!

"The FASLINK port is protected against shorts." source

Adapters for older hardware

The FASLINK XA-1 and XA-2 adapters convert the wiring on older Axe-Fx II and MFC-101 hardware (see above) from Ethernet/Ethercon to XLR. These adapters are "active" (source). They can be bought directly from Fractal Audio's online shop and G66.

The adapters do not support FASLINK II.

XA-1 diagram.png

XA-2 diagram.png

FASLINK adapters.png

More information in the FASLINK Setup Guide