Read the Owners Manual first!
Global blocks
The information on this page supplements the official manuals.
Contents
- 1 Global Blocks: supported by which Fractal Audio products?
- 2 Export or back up Global Blocks
- 3 Global blocks, modifier parameters, controller settings
- 4 How to set the bypass state of Global Blocks globally
- 5 Preset noise gate and preset input level as Global Blocks
- 6 Unlink Global Blocks
- 7 Remove Global Block data from the Axe-Fx II
- 8 No Global Blocks on AX8 and FX8
- 9 More information
Global Blocks: supported by which Fractal Audio products?
- Axe-Fx II: yes.
- FX8: no.
- AX8: no.
Export or back up Global Blocks
When backing up a preset with Global Blocks, you also always need to backup the System data too, to be able to restore the stored data.
Global blocks, modifier parameters, controller settings
Modifier settings are not saved within global blocks. The same goes for controllers settings. You can use Recall Effect in the Axe-Fx II to copy controller settings from one preset to another, or use the editor.
How to set the bypass state of Global Blocks globally
The state (On/Off) of a Global Block is saved per preset. This means you can set Global Block #1 Off in one preset, and On in another.
If you want global control of the bypass state of an effect block, here's a solution:
- Attach the Bypass parameter of the effect block to an External controller.
- In the I/O menu, switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
- This works with global and non-global blocks, and across all presets with the same effect block.
Preset noise gate and preset input level as Global Blocks
The Noise Gate in the GTE/IN menu, including the Level control on that page, can be linked to a Global Block.
Unlink Global Blocks
You can unlink a Global Block in the following ways:
- Global Block menu
- STRIP ALL GLOBAL DATA in the Utility menu
- press Enter in the Recall menu
- use Axe-Edit or Fractal-Bot.
Remove Global Block data from the Axe-Fx II
There's no authorized method to clean your Axe-Fx II from the Global Block data, stored somewhere in the system data memory area.
No Global Blocks on AX8 and FX8
Fractal Audio:
- "The AX8 was not designed for use with Global Block, and there are no plans to add them.. You already have similar capabilities in AX8-Edit." source
- "The FX8 was not designed for use with Global Block, and there are no plans to add them.. You already have similar capabilities in FX8-Edit. source
