Read the Owners Manual first!

VP4

From Fractal Audio Wiki
Revision as of 09:42, 11 October 2024 by Yek (talk | contribs)
Jump to navigation Jump to search

Upcoming product: Fractal Audio "Virtual Pedalboard" with 4 foot switches (VP4).

4 simultaneous effects. Plus gate, EQ and loop.

600px

FRACTAL AUDIO QUOTES


[1] It's not a replacement for any of our current products.

[2] (Does it come with a power supply included?) Yes

[3] One to the right is a power button.

[4] (Can it run a Dual Detune, Reverb, Delay and a Plex Delay simultaneously, in a non-economy algo mode?)
Yes

[5] In L = Guitar
Out L = Preamp In
In R = Preamp Out
Out R = Power amp In

[6] It uses a new, streamlined UI.

[7] 254mm x 160.3mm

[8] It does have channels and scenes and presets, etc. but in a simplified approach. Its primary application is live performance and the UI was designed with that in mind.
It sounds very good. It has the analog path from the Axe-Fx III (which evolved from the FX-8). Beta testers report that it "plays nicely" with difficult fx loops.

More (leaked) information (not verified):

  • Power:
    • separate 9V DC 1.3A power supply (included)
  • Display:
    • 480x272
  • I/O:
    • mono/stereo input (2x jack), max 20dB
    • stereo outputs (2x jack), max 16dB
    • 4CM support (mono)
    • SPDIF (48kHz fixed, 2xRCA), e.g. to connect to FM3 / FM9 / Axe-Fx III
    • Adjustable Input Pad, with auto correction
    • Unity gain, unless programmed otherwise
    • Variable input impedance
  • A/D D/A
    • 24-bit, 48kHz
    • Analog bypass: no AD/DA conversion, no processing, no latency. Controllable with a switch or automatically.
  • MIDI:
    • 3.5 mm MIDI IN and OUT
    • Program Changes (send/receive) and Control Changes (receive only)
    • MIDI-over-USB
    • Receives MIDI Clock, does not transmit MIDI clock.
  • USB:
    • USB-C
    • USB Audio 2.0 OUT channels 1+2: processed output, 3+4: unprocessed (copy of inputs)
    • USB Audio 2.0 IN channels 1+2: send incoming USB Audio directly to outputs, 3+4: process incoming USB Audio and send to outputs
  • Hardware UI shortcuts:
    • Home+Save = Mode Select
    • Enter+Exit = Setup
    • Expert Edit: Page Left+Right
  • Foot switches:
    • No scribble strips
    • Tap and hold functions (e.g. to switch channels)
  • Expression pedal connections
    • Two, or single external switch per connection
  • Connectivity:
    • Can be used with other gear through analog connections or SPDIF, for PRE as well as POST effects.
  • Sound
    • 104 presets, scenes per preset, and 4 channels per effect block
    • Presets can be configured for 4CM
    • Gapless switching
    • Chorus - Compressor - Delay - Drive - Stereo Enhancer - Filter - Flanger - Formant - Gate/Expander - GEQ - Megatap Delay - Multitap Delay - PEQ - Phaser - Pitch - Plex Delay - Resonator - Reverb - Ring Modulator - Rotary - Synth - Tremolo - Volume - Wah
    • Noise gate at the input, before the 4 effects
    • 10-band EQ at the output of each preset
    • Additional tweaked types, such as Vibrato, single voice Pitch types
    • MIX Law has been tweaked
    • Some Drive blocks now have a MODE switch instead of multiple types (e.g. Timothy)
    • Some types have been renamed.
    • Effects 2+3+4 can be routed in parallel with the previous effect
    • Turn the select knob to highlight a block, press Enter to edit the block, turn the corresponding A-D knob to adjust value, page arrow to get to other pages
    • Expert Edit mode (press Page Left+Right)
    • Support for parameter modifiers
  • VP-Edit editor.
  • Upgradeable firmware.