MFC-101 MIDI foot controller (legacy)

MFC-101 product information

• MFC-101 product information

MFC-101 manual and guides

• MFC-101 documentation

MFC-101 Mark I, Mark II and Mark III

• Changes in Mark II:
  • Cliff: "The only change is the CAT-5 connector is now an Ethercon jack. An Ethercon jack will work with either a CAT-5 cable or an Ethercon cable." Source
• Changes in Mark III:
  • Solid-State switch technology. No moving parts except a spring "actuator". Switching is fully electronic and silent with no switches to wear out. Mechanical lifespan 1 million actuations.
  • "FASLINK" jack: a new, proprietary communications link that features bi-directional MIDI and power over a standard XLR microphone cable. Cable runs of hundreds of feet are possible. You need a FASLINK adapter (XA-1) to convert XLR to Ethernet/Ethercon on the Axe-Fx side, or use the Axe-Fx II XL with built-in FASLINK connection. If you want to use a XLR cable with MFC-101 Mark I/II models, you also need a FASLINK adapter (XA-2) at the MFC side.
  • Requires separate firmware.

Accessories for MFC-101

• Go to Hardware accessories to find sources for cables, labels etc.

MFC-101 pedalboard pictures

• This thread shows pictures of pedalboards of MFC-101 owners.