Factory presets list

Factory presets, categorized by amp type and/or main effect type

To be added.

When speaking about the factory presets on the Axe-Fx Standard and Ultra:

"The presets were created using studio monitors. Event 20/20 to be exact. They're very neutral. Guitars were a strat copy and a PRS."
"The presets are meant as demonstrations of the capabilities. Also they are designed to evoke the "wow" response. As such they tend to be overprocessed. Think of them as a starting point."

If possible, use stereo studio monitors when running through the factory presets. It makes a lot of difference and you'll hear the presets the right way!
Preset output levels can vary from preset to preset.
Some presets may include a noise gate set to a threshold that may not work well with your guitar. Turn the threshold to zero to switch the gate off (Layout menu).
Some presets contain an ENH block (Stereo Enhancer) which is for stereo use only. If you're running in mono and audio output is set to “Sum L+R”, Phase cancellation may occur.
Some presets include a Delay block with the Phase Rev parameter engaged. This is a stereo-only feature. If you're running in mono and audio output mode is set to “Sum L+R”, you may not hear any delay trails because of Phase cancellation. Switch off Phase Rev or select output mode “Copy L>R” instead.
When using stereo output mode "Copy L>R" you'll lose signals which are hardwired to the right channel.