Factory presets

The information on this page supplements the official manuals.

About factory presets

Fractal Audio posts new versions of the factory preset banks on the Support page from time to time. Use Fractal-Bot to upload preset banks to the hardware. Or use the editor to upload selected presets from the banks.

If you want to store your own presets, you have to overwrite factory presets, unless you have an Axe-Fx II XL or XL+ (banks D and up are empty).

The amp modelers are sensitive to the type of guitar you're using in regard to presets. For example, use a guitar equipped with single coil pickups when auditioning Fender amp presets.

When hitting the strings in a normal manner on a guitar equipped with single coils, factory presets with clean amp models should not distort. When really digging in the strings, especially using a high-output humbucker, some clean presets may distort. Don't worry, they should probably be getting distorted, based on their settings. If you don't like that, just turn down Drive or Master Volume or Input Trim in the Amp block.

Preset output levels can vary from preset to preset. If a factory preset makes the Out 1 Clip LED blink, its overall signal level is too hot. Turn down Level in the Amp block.

If possible, play the factory presets in stereo to hear the presets at their best.

If you're running mono and audio output is set to “Sum L+R”, phase cancellation may occur. This can happen if the preset contains an Enhancer block in Classic Mode, or a micro delay in the Cab block. Or when a preset contains a Delay block with the Phase Rev parameter engaged.

When using output mode "Copy L>R" you'll lose the part of the signal that's hardwired to the right channel. That might be a Ping Pong delay, or a stereo Cab block with both sides hard-panned.

Fractal Audio:
"The presets were dialed in loud so as to be sure the Fletcher-Munson effect did not influence the sound." source

Here's a list of amps and cabs used in the stock Axe-Fx II presets, by AxeFxTutorials. You can also use FracTool to see which cabs are used in presets.

The meaning of titles of Axe-Fx II factory presets are discussed in this thread.

Factory presets

Axe-Fx II

• Mark I and II: 3 preset banks (A B C).
• XL and XL+: 6 banks (A B C D E F). Banks D, E and F are empty.

Cooper Carter demonstrates factory presets.

July 2017 factory presets:

Bank A:

Bank B:

Bank C:

AX8

Banks 1 - 16 contain factory presets.

Bank 64 provides 8 utility presets and templates, including a preset for acoustic guitar, a demonstration of scene controllers and more.

1-1 DoubleVerb 1-2 Brownface 1-3 Top Boost 1-4 Badger 18 1-5 1959 SLP 1-6 USA IIC+ 1-7 Friedman BE 1-8 Friedman HBE 2-1 DeluxeVerb 2-2 USA Clean 2-3 65 Bassguy 2-4 AC-20 Treble 2-5 Wrecked Express 2-6 Brit 800 2-7 Recto Vintage 2-8 Recto Modern 3-1 EJ Clean 3-2 Boutique 1 3-3 A-Class 15 3-4 Supertweed 3-5 Jumped Plexi 3-6 5153 Blue 3-7 5153 Red 3-8 Savageness 4-1 Super Verb 4-2 Nuclear Tone Clean 4-3 Mr. Z 38 4-4 BritSilver 4-5 Citrus 4-6 TX Star (X=Ld Y=Cln) 4-7 Dirty Shirley 4-8 Euro Uber 5-1 5F1 Tweed EC 5-2 PrinceTone 5-3 Junior Blues 5-4 Deluxe Tweed 5-5 59 Bassguy 5-6 Band Commander 5-7 Vibra-King 5-8 Super Crunch 6-1 Plexi Normal 6-2 Plexi 100W Treble 6-3 1987x Treble 6-4 1987x Jump LM 6-5 Brit 800 Mod 6-6 The Brown Sound 6-7 Brit JVM OD1 6-8 Brit JVM OD2 7-1 ODS-100 Clean 7-2 ODS-100 Lead 7-3 ODS-100 HRM 7-4 Carol Ann OD-2 7-5 Fox ODS 7-6 Two-Stone 7-7 Triptik Classic 7-8 Triptik Modern 8-1 Herbie 2+ 8-2 Herbie 3 8-3 Dizzy VH4 Ch 3 8-4 Dizzy VH4 Ch 4 8-5 6160 Block 8-6 6160 II 8-7 Angle Severe 2 8-8 Das Metall 9-1 Shiver Clean 9-2 Hipower Brilliant 9-3 JTM 45 9-4 Dee Cee 30 9-5 Euro Blue 9-6 Euro Blue Modern 9-7 Euro Red 9-8 Euro Red Modern 10-1 CAE3+ Clean 10-2 CAE 3+SE Rhythm 10-3 CAE 3+SE Lead 10-4 Brit Pre Lead 10-5 Try Axial 10-6 SOLO100 Crunch 10-7 SOLO100 Lead 10-8 Solo 99 Lead 11-1 Highway 66 11-2 RubyRocket 11-3 Buttery 11-4 Tucana 11-5 Comet Concourse 11-6 Wrecker Rocket 11-7 Blanknship Leeds 11-8 Hot Kitty 12-1 Cameron Low 12-2 Cameron High 12-3 Spawn QRod 12-4 Spawn Nitrous 12-5 Atomica 12-6 FAS Modern 12-7 Djentlemanly 12-8 Teh Brootalz 13-1 MachineGun 13-2 WholeLotta 13-3 Funk #49 13-4 Elegant Gypsy 13-5 Hell's Glockenspiels 13-6 Destructive Appetite 13-7 Still Got the Blues 13-8 So Many Roads 14-1 Andy's JC 14-2 Mr. Benson 14-3 Who's Next? 14-4 Limelight 14-5 Blues Aroncino 14-6 Petrucci Rhythm 14-7 Mark Day Solo 14-8 EVH 90s 15-1 Round Lead 15-2 USA Lead 15-3 Rack Pre Lead 15-4 StudioLead 15-5 JM45 Blues Lead 15-6 Bludojai Lead 15-7 ShiverLead 15-8 FAS Lead 1 16-1 LooperDemo 16-2 Thick & Chunky 16-3 Bassman About2 Explode 16-4 Citrus Lead 16-5 Crystal Echoes 16-6 Black Hole 16-7 Prometheus 16-8 1967 All Over Again

64-1 THRU 64-2 CAB-LAB SCRATCH 64-3 OUT1:FR OUT2:AMP+CAB 64-4 AMP X/Y SWITCH 64-5 FOR ACOUSTIC GUITAR 64-6 DUAL INPUT MAG PIEZO 64-7 SCENE CONTROLLERS 64-8 MUTE

FX8

Cooper Carter compiled a list of all FX8 factory presets, including the amps (traditional and amp models) that were used when creating them. Download the list (version: August 2015).

If you put the FX8 in front of your amp, you won't experience the factory presets as they are intended. That's because some of them are configured for POST only (FX8 in the effects loop of an amp) or 4CM. An easy way to overcome this, is to use a patch cable to connect OUT [PRE] L MONO to IN [POST] L, and connect OUT [POST] L to your amp.

Some factory presets are configured for stereo output amd won't sound like they should in a mono setup.