Global blocks

User contributions

Wicked Wiki

• Global Blocks are discussed in this Wicked Wiki thread.

Exporting or backing up presets with Global Blocks

• When backing up a preset with global blocks, you also always need to backup the System too, to get access to the global data.

Modifier parameters and controller settings not stored in Global Blocks

• Modifier settings are not saved within Global Blocks. The same goes for controllers settings. You can use Effect Recall to copy controller settings from one preset to another.

Saving On/Off state

• As of firmware 6.00 the state (On/Off) of a Global block is saved per preset. This means you can set Global Block #1 Off in one preset, and On in another.

Before 6.x the On/Off state was shared by all presets.

• If you want global control of the bypass state of an effect block (pre 6.0-behavior), here's a solution:
  1. Attach the Bypass parameter of the effect block to an External controller.
  2. In the I/O menu, switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
  3. This works with global and non-global blocks, and across all presets with the same effect block.

Video tutorial

• Want to see how it works? Check out this video By Katsu Kuri Media.