October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.
Difference between revisions of "Axe-Fx II (legacy)"
(No difference)
| |
Revision as of 07:49, 29 August 2011
Contents
Manufacturing
The Axe-Fx II is made in USA. All units are identical for all global regions. Source
Some manufacturing information can be found by reading Liam's posts.
Rack
The Axe-Fx II is a 19” 2U device. It can be mounted in a rack or rackbag. If necessary combined with things like a racked power amp, a power conditioner etc. Rear rack rails are not required or supported. It's about two inches deeper than the Standard and Ultra (see Specifications).
Rack ears
The rack ears at the front are removable if you need the space. Source
Rack stands
You can put the rack or bag on a stand such as this one or this one.
Power
The Axe-Fx is identical for all global regions and supports 100-240V.
Weight and dimensions of boxed Axe-Fx II
Cliff: "17 lbs. 22 x 18 x 8 inches." Source
Serial number
Units with CC numbers were assembled by Cliff himself. The 5 numbers are an internal work order number. The XX indicate the batch number and the #X indicates what unit from that lot was produced. This shows who built and inspected each unit prior to going to Fractal for final inspection and burn-in. L or LF indicate the units that were built lead-free (CC#s are also lead free), and the motherboard will have an e1/e1 sticker as well. Source1 Source2
