|
|
| Line 1: |
Line 1: |
| − | __TOC__
| + | #redirect [[Modifiers,_controllers_and_Control_Switches#Control_Switches]] |
| − | | |
| − | =About Control Switches=
| |
| − | | |
| − | A modifiable parameter can be assigned to a Control Switch (CS) instead of an internal or external controller. This applies to the AX8 and Axe-Fx III only. The CS can be controlled with a switch on the AX8 or FC controller.
| |
| − | | |
| − | This allows controlling a function like Input Boost in the Amp block directly with an onboard switch.
| |
| − | | |
| − | The state of the Control Switch is saved per scene.
| |
| − | | |
| − | =Control Switches on the AX8=
| |
| − | | |
| − | The AX8 has provides two Control Switches, which can be assigned globally or per-preset like any other footswitch block from the main Footswitch (“FS”) page.
| |
| − | | |
| − | To set up a Control Switch footswitch:
| |
| − | # On the Footswitch (“FS”) page, use the NAV and A knobs to assign CS1 or CS2 to footswitch 1 – 8. | |
| − | # Add a modifier to the desired effect parameter, setting “CTRL SW1” or "CTRL SW2” as the source. | |
| − | # Adjust the modifier to work as desired.
| |
| − | | |
| − | To set initial values for a Control Switch:
| |
| − | # From the main FOOTSWITCH (“FS”) page of the AX8, page right to the CONFIG page.
| |
| − | # Select the CONTROLLERS option and press <ENTER>.
| |
| − | # Page to the CONTROL SWITCH (“CTRL SW”) page.
| |
| − | # Set the initial value of each switch for each scene to either “ON” or “OFF”.
| |
| − | | |
| − | [http://forum.fractalaudio.com/threads/why-use-control-switches-vs-scenes.126562/ forum discussion]
| |
| − | | |
| − | =Control Switches on the Axe-Fx III=
| |
| − | | |
| − | The Axe-Fx III provides 6 Control Switches.
| |
| − | | |
| − | The Control Switch can operate as a latching or momentary switch.
| |
| − | | |
| − | The state of a CS is stored per scene: On, Off, or LAST. "Last" (default) leaves the switch state unchanged when you change to a scene with this setting. The "per scene" settings can be accessed from the CS PER SCENE page in the Controllers menu.
| |
| − | | |
| − | Control Switches can be made part of a mutually exclusive group. This means that engaging one will bypass the others.
| |
| − | | |
| − | The Control Switches also let you transmit MIDI at will by pressing the switch, in conjunction with an FC-6 or FC-12. This doesn't depend on a preset change or scene change. Up to 4 MIDI commands (PC or CC) can be transmitted.
| |
| | | | |
| | [[category:Axe-Fx3]] | | [[category:Axe-Fx3]] |
