This is the wiki for products made by Fractal Audio Systems, maintained by members of the community.
Difference between revisions of "Setup menu"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
* [[FC-6_and_FC-12_foot_controllers|FC Controllers]] menu: configure the FC-6 and FC-12 controllers | * [[FC-6_and_FC-12_foot_controllers|FC Controllers]] menu: configure the FC-6 and FC-12 controllers | ||
| − | * Global | + | * Global Settings: ... |
| + | ** Output EQ Type | ||
| + | ** Power Amp Modeling | ||
| + | ** Cabinet Modeling | ||
| + | ** Tone Control Display | ||
| + | ** Update Pre-11.x Presewts Spkr Imp Upon Load | ||
| + | ** Spillover | ||
| + | ** Effects Mix | ||
| + | ** Noisegate Offset | ||
| + | ** Prompt On Edited Preset Change | ||
| + | ** Display Offset | ||
| + | ** Default Scene | ||
| + | ** Tap Tempo | ||
| + | ** Value Knob Push Function | ||
| + | ** AC Line Frequency | ||
* [[I/O menu]]: configure all audio inputs and outputs, USB and the pedal port(s) | * [[I/O menu]]: configure all audio inputs and outputs, USB and the pedal port(s) | ||
| − | * [[MIDI#MIDI_menu|MIDI/Remote]] menu: configure MIDI settings | + | * IR Capture |
| + | * [[MIDI#MIDI_menu|MIDI/Remote]] menu: configure MIDI settings and external controllers | ||
| + | * Utilities | ||
| + | ** Display | ||
| + | ** ADC Levels of output points and pedal ports | ||
| + | ** Reset System Params, Clear All Presets, Erase All User Cabs | ||
| + | ** USB Buffer Levels | ||
| + | ** Version info: firmwarem USB, FPGA | ||
[[category:Axe-Fx3]] | [[category:Axe-Fx3]] | ||
Revision as of 16:49, 11 June 2021
The Setup menu on the Axe-Fx III and FM3 gives access to important system parameters through the following sub menus:
- FC Controllers menu: configure the FC-6 and FC-12 controllers
- Global Settings: ...
- Output EQ Type
- Power Amp Modeling
- Cabinet Modeling
- Tone Control Display
- Update Pre-11.x Presewts Spkr Imp Upon Load
- Spillover
- Effects Mix
- Noisegate Offset
- Prompt On Edited Preset Change
- Display Offset
- Default Scene
- Tap Tempo
- Value Knob Push Function
- AC Line Frequency
- I/O menu: configure all audio inputs and outputs, USB and the pedal port(s)
- IR Capture
- MIDI/Remote menu: configure MIDI settings and external controllers
- Utilities
- Display
- ADC Levels of output points and pedal ports
- Reset System Params, Clear All Presets, Erase All User Cabs
- USB Buffer Levels
- Version info: firmwarem USB, FPGA
