The VP4 has been added to the wiki.
Difference between revisions of "Scene MIDI block"
| Line 30: | Line 30: | ||
The Scene MIDI block sends data out the MIDI OUT port only, not to USB (MIDI-over-USB). | The Scene MIDI block sends data out the MIDI OUT port only, not to USB (MIDI-over-USB). | ||
| − | <blockquote>"The MIDI block only sends data out the MIDI Out DIN jack. It does NOT send to the USB. The purpose of the MIDI block is to control other equipment in you rack via standard MIDI." [http://forum.fractalaudio.com/threads/axe-fx-iii-firmware-version-2-03.145132/page-8#post-1718184 source]</blockquote> | + | <blockquote>(Axe-Fx III) "The MIDI block only sends data out the MIDI Out DIN jack. It does NOT send to the USB. The purpose of the MIDI block is to control other equipment in you rack via standard MIDI." [http://forum.fractalaudio.com/threads/axe-fx-iii-firmware-version-2-03.145132/page-8#post-1718184 source]</blockquote> |
Revision as of 05:57, 9 May 2019
Contents
Available on which products
- Axe-Fx III: 1 block
- FM3: 1 block
- Axe-Fx II: no
- FX8: yes
- AX8: no
Channels or X/Y switching
- Axe-Fx III and FM3: no
- FX8: X/Y
What is the Scene MIDI block
The block lets you send up to 8 CC or PC MIDI messages through the MIDI OUT port upon scene changes, through different MIDI channels if needed. The MIDI messages vary per scene.
The block must be added to the grid to use, but does not have to be connected to the signal chain. it can't be bypassed, but a scene can be configured to send no MIDI messages.
Tip: you can use the Scene MIDI block to send MIDI commands to the device itself, by connecting MIDI OUT to MIDI IN.
Output of the Scene MIDI block
The Scene MIDI block sends data out the MIDI OUT port only, not to USB (MIDI-over-USB).
(Axe-Fx III) "The MIDI block only sends data out the MIDI Out DIN jack. It does NOT send to the USB. The purpose of the MIDI block is to control other equipment in you rack via standard MIDI." source
