October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.
Difference between revisions of "MFC-101 MIDI foot controller (legacy)"
Line 8: | Line 8: | ||
==Rj45 port and CAT5 cable== | ==Rj45 port and CAT5 cable== | ||
− | To | + | To connect the Axe-Fx II and the MFC-101 floor controller a CAT5 cable can be used (instead of a MIDI cable). The CAT5 cable provides power to the MFC-101 without the need to connect an adapter to the Axe-Fx II, transmits MIDI messages between the Axe-Fx II and MFC-101, and carries tuner and tempo information to the MFC-101. With the CAT5 cable the MFC-101 switches off when the Axe-Fx is switched off. |
The CAT5 cabe connects to the Rj45 port on the Axe-Fx II. A propietary communication protocol is used for bidirectional communication and phantom power. | The CAT5 cabe connects to the Rj45 port on the Axe-Fx II. A propietary communication protocol is used for bidirectional communication and phantom power. |
Revision as of 22:29, 11 July 2011
Contents
User contributions
Product information
The MFC-101 is Fractal's floor controller. Fractal Audio MFC-101 Product information
Tips and tricks for the MFC-101
Read the How-Tos for the MFC-101.
Rj45 port and CAT5 cable
To connect the Axe-Fx II and the MFC-101 floor controller a CAT5 cable can be used (instead of a MIDI cable). The CAT5 cable provides power to the MFC-101 without the need to connect an adapter to the Axe-Fx II, transmits MIDI messages between the Axe-Fx II and MFC-101, and carries tuner and tempo information to the MFC-101. With the CAT5 cable the MFC-101 switches off when the Axe-Fx is switched off.
The CAT5 cabe connects to the Rj45 port on the Axe-Fx II. A propietary communication protocol is used for bidirectional communication and phantom power. The internal PSU for the MFC-101 will also support an expansion module for the MFC-101. http://forum.fractalaudio.com/axe-fx-ii/35997-axe-fx-ii-technical-questions-thread-30.html#post491404 Source1] Source2 Source3