October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.

Difference between revisions of "Fractal-Bot"

From Fractal Audio Wiki
Jump to navigation Jump to search
 
(49 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
−
[[image:Fractal-Bot.png|125px|link=http://www.fractalaudio.com/fractal-bot.php]]
 
 
=About Fractal-Bot=
 
=About Fractal-Bot=
  
−
Fractal-Bot is a simple and free data transfer utility for Fractal Audio devices.
+
Fractal-Bot is a free software utility for Fractal Audio devices.
  
−
You can use Fractal-Bot to:
+
Use Fractal-Bot to:
  
−
* update the firmware of the device (processor or foot controller)
+
* Update the firmware of the device.
−
* update the USB firmware of the device (processor or foot controller)
+
* Update the USB firmware of the device.
−
* send and retrieve single presets or preset banks
+
* Send and retrieve single presets or preset banks.
−
* send and retrieve a single IR or cab banks
+
* Send and retrieve a single IR or cab banks.
−
* backup and restore system data, including [[Global blocks]]
+
* Backup and restore system data, including [[Global blocks]].
−
* backup and restore the configuration of FC controllers
+
* Backup and restore the configuration of FC controllers.
  
−
[http://www.fractalaudio.com/fractal-bot.php Download the latest (standalone) version of Fractal-Bot for Windows or OS X)]
+
You can [http://www.fractalaudio.com/fractal-bot.php download] the latest standalone version of Fractal-Bot for Windows or macOS.
  
−
More information:
+
Fractal-Bot is also available embedded inside the editors in <code>Tools > Fractal-Bot…</code>. The embedded version is more convenient, whereas the standalone version has some additional capabilities.
−
* [[Owners_Manuals]]
 
−
* [http://forum.fractalaudio.com/forums/fractal-bot.76/ Discussion forum]
 
  
−
=Read first=
+
For more information see:
 +
* The [[Owners Manuals]].
 +
* The <q>[http://forum.fractalaudio.com/forums/fractal-bot.76/ Fractal-Bot]</q> forum.
 +
* The <q>[http://forum.fractalaudio.com/threads/wicked-wiki-5-no-excuse-for-no-backup.49204/ WICKED WIKI 5: No Excuse for No Backup]</q> discussion.
  
−
* Always create backups of your presets etc. on a regular basis! Fractal-Bot makes it fast and easy.
+
[[image:Fractal-Bot.png|125px|link=http://www.fractalaudio.com/fractal-bot.php]]
−
* To connect Fractal-Bot to your computer, you may need to install a driver for your operating system (check your manual or the wiki).
+
 
−
* If your Fractal Audio device has two USB ports, make sure you're using the right one (USB-B type).
+
=Read this first=
−
* Fractal-Bot can be launched at as standalone application, of as an embedded tool from within the [[Editors]].
+
 
−
* In case of issues, verify that you're running the latest version of Fractal-Bot.
+
* Always create '''backups''' of your presets etc. on a regular basis! Fractal-Bot makes it fast and easy.
−
* In case of connection issues, try another USB cable first.
+
* To connect Fractal-Bot to your computer, you may need to install a '''driver''' for your operating system. read this: [[USB]].
−
* To prevent communications issues, don't run Fractal-Bot and the editor at the same time.
+
* Use the correct '''USB port (USB-B, or USB-C on VP4)'''.
−
* If Fractal-Bot hangs, check for corrupted presets or cabs.
+
* Fractal-Bot is available as a '''standalone''' application, and as an '''embedded''' tool in the editors.
−
* When using [[Global blocks]] in your presets, make sure to back up the system data too.
+
* In case of issues, verify that you're running the '''latest version''' of Fractal-Bot.
−
* After restoring system data to your device, shut down your device and boot it again.
+
* In case of connection issues, try another '''USB cable''' first.
 +
* To prevent communications issues, '''don't run Fractal-Bot and the editor at the same time'''.
 +
* If Fractal-Bot '''hangs''' during transfers, check for corrupted presets or cabs.
 +
* When using '''[[Global blocks]]''' in your presets, make sure to back up the system data too.
 +
* After restoring system data to your device, shut down your device and '''boot''' it again.
 
* The "Auto-Update Firmware" feature in Fractal-Bot doesn't signal beta versions of firmware.
 
* The "Auto-Update Firmware" feature in Fractal-Bot doesn't signal beta versions of firmware.
−
* Fractal-Bot doesn't save your editor's [[Library]]. The contents are already stored on your computer.
+
* Fractal-Bot doesn't save your editor's '''[[Library]]'''. The contents are already stored on your computer.
−
* If you've restored presets to your device with Fractal-Bot, and they don't seem to appear on your device, make sure that the device is running current firmware.
+
* If you've restored presets to your device with Fractal-Bot, and they don't seem to appear on your device, make sure that the device is running '''current firmware'''.
−
* When using an Axe-Fx II, disable USB Adapter Mode.
+
* When using an Axe-Fx II, disable '''USB Adapter Mode'''.
−
* If something goes wrong when installing new firmware, and your device won't boot, read this: [[Emergency boot recovery]].
+
* If something goes wrong when installing new firmware, and your device won't boot, read this: '''[[Emergency boot recovery]]'''.
  
 
=Working with Fractal-Bot=
 
=Working with Fractal-Bot=
Line 42: Line 46:
 
==Connect==
 
==Connect==
  
−
Fractal-Bot uses the same kind of connection as the editor does. Read this: [[Editors]].
+
Fractal-Bot uses the same kind of connection as the editor does. Read this: [[Editors]]
  
−
==Launch from the editor==
+
==Launch from within the editor==
  
−
The embedded version of Fractal-Bot is located the editors' Tools menu. It is the same as the standalone version.
+
The embedded version of Fractal-Bot is located in the editors' Tools menu. It is the same as the standalone version.
  
 
==Auto-update==
 
==Auto-update==
Line 54: Line 58:
 
==Update firmware==
 
==Update firmware==
  
−
[[image:Icon-firmware.png|link=]]
+
Read this: [[Firmware]]
−
 
 
−
Read this: [[Firmware]].
 
  
 
==Install factory presets==
 
==Install factory presets==
  
−
Read this: [[Factory presets]].
+
Read this: [[Factory presets]]
  
−
==hidden Utility mode==
+
==Utility mode (hidden)==
  
−
In some cases, Fractal-Bot needs to operate in a special mode.
+
In some cases, the standalone version of Fractal-Bot is used to operate in a special mode:
  
−
# Hold CTRL (Windows) or COMMAND (Mac), and:
+
# Hold <kbd>CTRL</kbd> on Windows or <kbd>COMMAND</kbd> on macOS.
−
# Click "Select Device" to reveal and select the hidden “Utility” menu option
+
# Click <q>Select Device</q> to reveal and select the hidden <q>Utility</q> menu option.
−
# Select the output port
+
# Select the output port.
 
# A MIDI Buffer Delay will appear, set this to 300 ms.
 
# A MIDI Buffer Delay will appear, set this to 300 ms.
  
−
=Hardware-specific features=
+
=Tips, tricks and troubleshooting=
  
−
==Axe-Fx III==
+
==Check available firmware==
  
−
Save and restore presets and user cabs, and create a backup of the system data, including Global Blocks and FC Controllers configuration.
+
Hold down the Control key on windows or the Command key on Mac and click on the device in the device drop down. Fractal-Bot will display the most recent firmware available on the server. [https://forum.fractalaudio.com/threads/incorrect-dyna-cab-version-after-update.207622/#post-2591245]
  
−
==FM9==
+
==Snapshots==
  
−
Same as Axe-Fx III, except Global Blocks.
+
Saving Snapshots in the editor is another way to quickly create backups of presets. Read this: [[Editors]]
  
−
==FM3==
+
==Speed up transfers==
−
 
 
−
Same as Axe-Fx III, except Global Blocks.
 
−
 
 
−
==Axe-Fx II==
 
  
−
Save and restore presets and user cabs, and create a backup of system data, including Global Blocks.
+
Switching to an empty preset before launching Fractal-Bot may speed up data transfers.
  
−
If you use Global Blocks in your presets, DO NOT FORGET to always backup the System data area as well. A backup of your presets alone does not contain the Global Block data.
+
==Don't run Fractal-Bot and the editor at the same time==
  
−
'''Axe-Fx II Mk I or Mk II''' – You can also backup banks of presets and system data to onboard memory. You can restore a single preset from onboard memory or the onboard factory presets using “Fetch” in the Utility menu
+
The standalone version of Fractal-Bot and a software editor cannot run at the same time. This is to avoid confusing the hardware.
  
−
'''XL and XL+''' – Saving presets to onboard memory is not possible, but a backup of system data can be stored in onboard memory
+
Trying to do so will result in an error message from Fractal-Bot if the editor was already running…
  
−
<blockquote>"The XL does not have a backup to FLASH function because the presets are all in FLASH. If the battery dies you don't lose your presets so there is no need to back them up. The system data IS battery-backed and the backup function saves system data to FLASH." [https://forum.fractalaudio.com/posts/1046313]</blockquote>
+
[[Image:Fractalbotconnecterror.png|350px]]
  
−
User cabs:
+
or similar to this from Edit if Fractal-Bot was already running…
  
−
'''Axe-Fx II Mk I and Mk II''' – User cabs 0-49 are included in a system backup. Cabs 50 and up are saved in a different area of memory and are not saved or restored when doing a system dump/restore, use Fractal-Bot to save these separately
+
[[Image:Editconnecterror.png|350px]]
  
−
'''Axe-Fx II XL and XL+''' – User cabs are not included in a system backup. Use Fractal-Bot to back these up
+
==If the Browse button doesn't work==
  
−
Want to speed up the backup process? Scroll to an empty preset slot before performing the backup.
+
If the Browse button doesn't work, exit Fractal-Bot, delete the file <q>Fractal-Bot.settings</q> and restart.
−
 
 
−
[https://forum.fractalaudio.com/threads/wicked-wiki-5-no-excuse-for-no-backup.49204/ Wicked Wiki thread]
 
−
 
 
−
==AX8==
 
−
 
 
−
Save and restore presets and user cabs.
 
−
 
 
−
==FX8==
 
−
 
 
−
Save and restore presets.
 
−
 
 
−
==FC controllers==
 
−
 
 
−
Save the FC configuration data by saving the system data of Axe-Fx III.
 
−
 
 
−
==MFC-101==
 
−
 
 
−
Save and restore the MFC-101 configuration. This requires the use of a USB-to-MIDI-interface.
 
−
 
 
−
The Axe-Fx II in USB Adapter Mode can be used as an interface, MIDI cables and a power supply are still required. Follow the instructions in Fractal-Bot.
 
−
 
 
−
The Axe-Fx III, FM9 and FM3 do not support USB Adapter Mode.
 
−
 
 
−
=Tips, tricks and troubleshooting=
 
−
 
 
−
==Snapshots==
 
−
 
 
−
Saving Snapshots in the editor is another way to quickly create backups of a preset. Read this: [[Editors]].
 
−
 
 
−
==Speed up transfers==
 
−
 
 
−
Switch to an empty preset before launching Fractal-Bot can speed up transfers.
 
−
 
 
−
==Don't run Fractal-Bot and the editor simultaneously==
 
−
 
 
−
Don't run the standalone version of Fractal-Bot and a software editor at the same time.
 
−
 
 
−
==Browse button doesn't work==
 
−
 
 
−
If the Browse button doesn't work, exit Fractal-Bot, delete the file "Fractal-Bot.settings" and restart.
 
  
 
==Emergency Boot Recovery==
 
==Emergency Boot Recovery==
  
−
In the event of issues during or after upgrading firmware, try this: [[Emergency Boot Recovery]].
+
In the event of issues during or after upgrading firmware, try the <q>[[Emergency boot recovery]]</q> process.
  
 
=Videos=
 
=Videos=
  
 
[[video:FAS-FB]]
 
[[video:FAS-FB]]
 +
[[video:G66-Firmware]]
  
 
[[category:Axe-Fx2]]
 
[[category:Axe-Fx2]]
Line 157: Line 116:
 
[[category:FM3]]
 
[[category:FM3]]
 
[[category:FM9]]
 
[[category:FM9]]
 +
[[category:VP4]]
 +
[[category:Remote]]
 
[[category:FX8]]
 
[[category:FX8]]
 
[[category:AX8]]
 
[[category:AX8]]
−
[[category:Remote]]
 
 
[[category:All]]
 
[[category:All]]

Latest revision as of 17:41, 20 October 2024

About Fractal-Bot

Fractal-Bot is a free software utility for Fractal Audio devices.

Use Fractal-Bot to:

  • Update the firmware of the device.
  • Update the USB firmware of the device.
  • Send and retrieve single presets or preset banks.
  • Send and retrieve a single IR or cab banks.
  • Backup and restore system data, including Global blocks.
  • Backup and restore the configuration of FC controllers.

You can download the latest standalone version of Fractal-Bot for Windows or macOS.

Fractal-Bot is also available embedded inside the editors in Tools > Fractal-Bot…. The embedded version is more convenient, whereas the standalone version has some additional capabilities.

For more information see:

Fractal-Bot.png

Read this first

  • Always create backups of your presets etc. on a regular basis! Fractal-Bot makes it fast and easy.
  • To connect Fractal-Bot to your computer, you may need to install a driver for your operating system. read this: USB.
  • Use the correct USB port (USB-B, or USB-C on VP4).
  • Fractal-Bot is available as a standalone application, and as an embedded tool in the editors.
  • In case of issues, verify that you're running the latest version of Fractal-Bot.
  • In case of connection issues, try another USB cable first.
  • To prevent communications issues, don't run Fractal-Bot and the editor at the same time.
  • If Fractal-Bot hangs during transfers, check for corrupted presets or cabs.
  • When using Global blocks in your presets, make sure to back up the system data too.
  • After restoring system data to your device, shut down your device and boot it again.
  • The "Auto-Update Firmware" feature in Fractal-Bot doesn't signal beta versions of firmware.
  • Fractal-Bot doesn't save your editor's Library. The contents are already stored on your computer.
  • If you've restored presets to your device with Fractal-Bot, and they don't seem to appear on your device, make sure that the device is running current firmware.
  • When using an Axe-Fx II, disable USB Adapter Mode.
  • If something goes wrong when installing new firmware, and your device won't boot, read this: Emergency boot recovery.

Working with Fractal-Bot

Connect

Fractal-Bot uses the same kind of connection as the editor does. Read this: Editors

Launch from within the editor

The embedded version of Fractal-Bot is located in the editors' Tools menu. It is the same as the standalone version.

Auto-update

Fractal-Bot checks for updates itself and will notify you if an update is available.

Update firmware

Read this: Firmware

Install factory presets

Read this: Factory presets

Utility mode (hidden)

In some cases, the standalone version of Fractal-Bot is used to operate in a special mode:

  1. Hold CTRL on Windows or COMMAND on macOS.
  2. Click Select Device to reveal and select the hidden Utility menu option.
  3. Select the output port.
  4. A MIDI Buffer Delay will appear, set this to 300 ms.

Tips, tricks and troubleshooting

Check available firmware

Hold down the Control key on windows or the Command key on Mac and click on the device in the device drop down. Fractal-Bot will display the most recent firmware available on the server. [1]

Snapshots

Saving Snapshots in the editor is another way to quickly create backups of presets. Read this: Editors

Speed up transfers

Switching to an empty preset before launching Fractal-Bot may speed up data transfers.

Don't run Fractal-Bot and the editor at the same time

The standalone version of Fractal-Bot and a software editor cannot run at the same time. This is to avoid confusing the hardware.

Trying to do so will result in an error message from Fractal-Bot if the editor was already running…

Fractalbotconnecterror.png

or similar to this from Edit if Fractal-Bot was already running…

Editconnecterror.png

If the Browse button doesn't work

If the Browse button doesn't work, exit Fractal-Bot, delete the file Fractal-Bot.settings and restart.

Emergency Boot Recovery

In the event of issues during or after upgrading firmware, try the Emergency boot recovery process.

Videos

Retrieved from "https://wiki.fractalaudio.com/wiki/index.php?title=Fractal-Bot&oldid=89231"