October 2024: Fractal Audio's VP4 Virtual Pedalboard has been added to the wiki.
Difference between revisions of "Dynamic Distortion block"
m (edited for readability) |
m (demote the heading) |
||
| Line 28: | Line 28: | ||
=Tips, tricks and troubleshooting= | =Tips, tricks and troubleshooting= | ||
| − | =With modulation and delay effects= | + | ==With modulation and delay effects== |
You can use the block to add some vintage drive to delay and modulation effects. | You can use the block to add some vintage drive to delay and modulation effects. | ||
Revision as of 22:11, 21 February 2024
Contents
Available on which products
- Axe-Fx III: 2 blocks
- FM3: no
- FM9: no
- Axe-Fx II: no
- FX8: no
- AX8: no
Channels or X/Y
- Axe-Fx III: 4 channels
About dynamic distortion
The Dynamic Distortion block was added in firmware 20 for the Axe-Fx III. It's not available on the FM3 and FM9.
The effect distorts the input signal dynamically, applying more distortion to different frequency ranges depending upon the shape of the filter. When the signal level is low, the output will be the same as the input. As the signal level increases more distortion will occur in those bands, boosted by the filter shape. It's a powerful tool for final shaping/mastering of the tone. The block contains a handful of presets (types) which demonstrate the basic technique.
The functionality is reminiscent of legacy Amp block parameters such as Character and Dynamic Presence/Depth, and is related to Speaker Drive in the Amp block.
Dynamic Distortion block position on the grid
The block is designed to be placed directly after the Amp block, and can process the signal in mono or stereo.
Tips, tricks and troubleshooting
With modulation and delay effects
You can use the block to add some vintage drive to delay and modulation effects.
See Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4) for forum member javajunkie's example.
