Global blocks

Manual

• 6 Global Blocks
• 10.2 Preset Utilities
• 13 Backing Up and Restoring

User contributions

Wicked Wiki

• Global Blocks are discussed in this Wicked Wiki thread.

Exporting or backing up presets with Global Blocks

• When backing up a preset with global blocks, you also always need to backup the System too, to get access to the global data.

Modifier parameters and controller settings not stored in Global Blocks

• Modifier settings are not saved within Global Blocks. The same goes for controllers settings. You can use Effect Recall to copy controller settings from one preset to another.

Global control of an effect block's Bypass state

• As of firmware 6.00 the state (On/Off) of a Global block is saved per preset. This means you can set Global Block #1 Off in one preset, and On in another. Before 6.x the On/Off state was shared by all presets.
• If you want global control of the bypass state of an effect block (pre 6.0-behavior), here's a solution:
  1. Attach the Bypass parameter of the effect block to an External controller.
  2. In the I/O menu, switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
  3. This works with global and non-global blocks, and across all presets with the same effect block.

Noise gate

• Firmware 11 and newer add global block functionality to the Noise Gate in the Layout menu.

Video tutorial

• Want to see how it works? Check out this video (Katsu Kuri Media).

Unlinking Global Blocks

• You can unlink a global block as follows:
  • within the global block menu
  • by using STRIP ALL GLOBAL DATA in Utility
  • by pressing Enter while in the Recall menu
  • by using Axe-Edit or Fractal-Bot.