View source for Fractal Audio VP4

__TOC__

[[image:VP4-front.jpg|400px]] [[image:VP4-rear.jpeg|400px]]
=References=

* [https://www.fractalaudio.com/vp4 Product page]
* [https://www.fractalaudio.com/vp4-downloads/ Downloads]
* [https://forum.fractalaudio.com/#vp4.154 User forum]
* [http://wiki.fractalaudio.com/wiki/index.php?title=Category:VP4 Wiki pages]
* [https://forum.fractalaudio.com/threads/vp4-faq.208790/ FAQ]

Documentation:
* [https://www.fractalaudio.com/downloads/manuals/VP4/VP4-Owners-Manual.pdf Owners Manual]
* [https://www.fractalaudio.com/downloads/manuals/VP4/VP4-Quick-Start.pdf Quick Start Guide]
* [https://www.fractalaudio.com/downloads/manuals/VP4/VP4-4CM.pdf 4CM]

=Rig pictures=

[https://forum.fractalaudio.com/threads/owners-show-their-vp4-boards.208709/ Owners show their VP4 boards]

=Design and development=

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/#post-239385]
It's not a replacement for any of our current products.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-251#post-270357]
That's the target market. We have more products in the pipe for that market.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-217#post-268907]
Its primary application is live performance and the UI was designed with that in mind.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-243#post-269736]
It uses premium analog components and converters. The input stage is FET and the op-amps are all "iPolar". None of this cheap CMOS stuff that other products are using.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-243#post-269736]
Adding MIDI clock should be easy. The VP-4 code was frozen before it was implemented in the Axe-Fx III and the FM-3/9. The only development allowed after code is frozen is bug fixing.
We're already talking about adding a Looper and an IR player block.
The product focus was on three things: quality, simplicity and flexibility.
Re. quality. It uses premium analog components and converters. The input stage is FET and the op-amps are all "iPolar". None of this cheap CMOS stuff that other products are using.
No product will ever satisfy everyone. If low price is your primary concern then the product is not for you. If having lots of simultaneous effects is your primary concern the product is not for you. If having up to four, high-quality effects from the Axe-Fx III in a small, pedal board-friendly format is what you want then this product is a compelling choice.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-vs-fm3.208723/page-3#post-2612127]
The Axe-Fx III and FM9 have essentially the same analog path as the FX8. The VP4 is similar and offers the same fidelity.
</blockquote>

</blockquote>

=Dimensions and weight=

; Weight : 3 lbs 7 oz (1.56 kg).
; Dimensions : 10.00" x 6.31" (254mm x 160.3mm).

[[image:VP4-dimensions.jpg|500px]]

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/vp4-dimensions.208906/#post-2609873] I measured the protrusion of the jack with the greatest depth (SPDIF) and it's about 9mm.
Cables would be extra.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-faq.208790/post-2611397]
Using anything other than the factory-provided feet and screws will void your warranty.
The approved screws are M3.5x8mm, with approximately 5mm protruding into the VP4 chassis. Internal components are aligned with the screw holes, so if third-party screws extend too far, they may cause damage to these components. Such damage will be identifiable and not covered by the warranty.
For safe mounting, Velcro is the recommended solution.
</blockquote>
</blockquote>

=Processing=

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-242#post-269736]
The VP-4 uses the Axe-Fx III DSP's little brother. It's a single core version with the same instruction set so porting stuff from the Axe-Fx III is almost trivial.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-252#post-270388]
The VP4 uses a SoC. It has an ARM Cortex A15 core and a C66x core along with a bunch of peripherals. The DSP in the Axe-Fx III would be too power-hungry for this application.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-250#post-270349]
It's quite possible we could add more blocks in future firmware. I can envision, say, four switchable blocks and two fixed blocks per preset. The fixed blocks are always on. The switchable blocks can be bypassed/engaged. Or four fixed blocks and four switchable blocks. It's just software. It's a fairly powerful processor, more powerful than the FX8 had, but our algorithms have continued to increase in complexity and require more processing power than things did back in the FX8 days.
</blockquote>
</blockquote>

=Latency=

The latency of the unit is 1.2 ms. [https://forum.fractalaudio.com/threads/latency.208751/#post-2608085]

Read this: [[Latency]].

=Screen=

480 x 272 high contrast color LCD.

No touch screen.

=Power=

Power connector: 2.1mm, negative center.
Wall wart included (9V DC, 1.3A). 

The unit has a power button.

No internal battery.

[https://forum.fractalaudio.com/threads/vp4-compatible-pedalboard-power-supplies.208894 This user forum thread] discusses power supplies.

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/post-2607596]
The maximum current draw is 1.3A. Typical draw is less than 1A but we cannot guarantee proper operation if using a supply below the rated specification. It can run on 12V and the current draw will be lower in this case.
</blockquote>
</blockquote>

=Firmware=

The [[Firmware|firmware]] is upgradeable, allowing the addition of new features and bug fixing.

[https://www.fractalaudio.com/vp4-downloads/ Download the latest official release here.]

=PRE and POST position=

The VP4 can be used before an amp (PRE) or in its effects loop (POST).

Sets of factory presets are configured specifically for Pre and for Post (series of parallel) operation. 
A list is included at the the end of its owners manual.

=Analog I/O=

==Input==

Mono/stereo input, 2x 1/4" TS jack, max +20dBu (instrument level / line level).

The VP4 defaults to mono input.

[[Input impedance]]: variable (adjustable).

Adjustable [[I/O_connectivity_and_levels#Instrument_input|Input pad]], with auto correction. The manual states that the VP4 comes set for a typical guitar with hot pickups. If input clipping occurs, an IN CLIP warning is displayed and the Input Pad setting is temporarily increased.

<blockquote>
'''OWNERS MANUAL'''
<HR>
<blockquote>
If the input of the VP4 clips persistently, the unit will automatically increase the Input Pad setting. When this occurs, the word “Auto” will appear next to the Input Pad value, for example: “12 dB (Auto)” indicating that the pad was automatically increased to 12 dB. When you reboot the VP4, the automatic setting is cleared, and the last manually selected value is restored. If you want to make the automatic pad setting permanent, just turn the Input Pad knob one “click” to clear “Auto” and set the desired value. While "4CM Routing" is enabled, a common input pad setting is shared by both PRE and POST inputs. Excessive levels at either of these will cause the automatic pad setting to be applied to both.
</blockquote>
</blockquote>

==Output==

1/4" TS L/R (mono/stereo), max +16dBu, 600 Ohm. [[I/O_connectivity_and_levels#Balanced_and_unbalanced_signal|Unbalanced]]. No [[Humbuster]].

Defaults to stereo output.

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/page-3#post-2607580]
All of the outputs on the VP4 are unbalanced.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/thoughts-on-2-x-vp4%E2%80%99s-1-for-in-front-1-for-fx-loop-of-an-amp.208727/post-2608734]
Humbuster is not necessary because it's DC powered and the chassis is floating. Hum occurs due to ground loops. If equipment is AC powered the chassis must be grounded by law. This introduces ground loops when using unbalanced connections. The correct solution is for everything to be balanced but the industry seems reluctant to embrace that.
</blockquote>
</blockquote>

Output is [[I/O_connectivity_and_levels#Unity_gain|unity gain]], unless programmed otherwise.

==4CM==

[[I/O_connectivity_and_levels#4CM_.28Four_Cable_Method.29|4CM (Four Cable Method)]] is supported (mono only).

To enable this, turn on 4CM Routing in Setup. Only presets configured specifically for 4CM will work with this setup. Using a preset that IS NOT configured for 4CM will switch the VP4 to BYPASS and defeat all processing.

Global settings for Input Mode and Output Mode (except "MUTE") are IGNORED when 4CM Routing is enabled, and only the left channel of the last Pre- or Post effects is passed to the respective output. Mono effect types and settings are therefore recommended for a 4CM rig. Remember that many stereo effects have controls like Stereo Spread or Master Pan, which can be used to eliminate differences between right and left channels. The Input Gate is applied at the Pre input, which also feeds the tuner. The master Preset EQ, Main Levels, and Scene Levels are applied at the Post output. The Input Pad setting affects both the PRE and POST inputs. If your Amp's send level is particularly hot, this might require a higher pad setting than your guitar.

A set of factory presets is configured specifically for 4CM. See a list of VP4 factory presets at the end of its Owners manual.

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/new-fractal-product-coming.207160/page-78#post-2602690]
In L = Guitar<BR>
Out L = Preamp In<BR>
In R = Preamp Out<BR>
Out R = Power amp In
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-217#post-268907]
It has the analog path from the Axe-Fx III (which evolved from the FX-8). Beta testers report that it "plays nicely" with difficult fx loops.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-vs-fm3.208723/page-3#post-2612127]
The Axe-Fx III and FM9 have essentially the same analog path as the FX8. The VP4 is similar and offers the same fidelity.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-with-fm9.208741/post-2609064]
SPDIF is not supported with 4CM. As you observed, the SPDIF is always stereo.
</blockquote>
</blockquote>

==Insert==

To use the VP4 as an analog insert, for example with the FM3, check the Owners Manual.

=Digital I/O=

==Converters==

24-bit, 48kHz (fixed).

Dynamic range is 114 dB, 20-20k frequency response.

==USB==

USB-C port for data and audio.

MIDI-over-USB is supported.

USB Audio 2.0 provides 4 channels (2x2) at 48kHz.

** OUT channels 1+2: processed output.
** OUT channels 3+4: unprocessed (copy of inputs).
** IN channels 1+2: send incoming USB Audio directly to outputs.
** IN channels 3+4: process incoming USB Audio and send to outputs.

Windows computers require a software driver. [https://www.fractalaudio.com/vp4-downloads Download the driver here.]

Read this: [[USB]].

==SPDIF==

SPDIF can be used to digitally connect the VP4 to an FM3, FM9 or Axe-Fx, through RCA connectors, at 48kHz fixed [[Sample rate|sample rate]].

A digital connection avoids the necessary A/D and D/A conversion and inherent latency that comes with analog-to-digital connections.

The SPDIF output of the VP4 always mirrors the signal at the analog outputs. 

Read this: [[Digital I/O and audio]].

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-255#post-270805]
The analog input has to be buffered as well. In most (all?) processors you buffer data up in frames. A typical frame size is, say, 32 samples. You can't start processing that frame until it is full. When it is full you ping-pong and start filling the opposite buffer. The physical latency of SPDIF is usually no more than a sample or two. A typical A/D converter has a latency of 10-20 samples. The same thing happens at the output. You read from an output buffer and when it's empty you ping-pong to the opposite buffer. A typical D/A has a latency of, again, 10-20 samples. A SPDIF output has only a sample or two. So, in the case where you use a frame size of 32 you get a total buffer latency of 64 samples. If we assume the A/D and D/A are 16 samples each the total latency is 96 samples. If you use SPDIF you'd have about 30 samples less latency.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-with-fm9.208741/post-2609064]
SPDIF is not supported with 4CM. As you observed, the SPDIF is always stereo.
</blockquote>
</blockquote>

==Automatic VP4 Bypass==

The VP4 allows a buffered analog bypass mode. This passes the signal directly from input to output without digital conversion, latency, or processing.

This can be enabled through a switch or automatically. To have analog bypass activate ''automatically'' when all four effects are bypassed, set the option in the [[Setup menu]] to ON.

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-vp4-virtual-pedalboard.6698/page-4#post-271823]
We considered analog dry-through early in the design phase but it just causes more problems than it's worth. If it were a dedicated delay or reverb device then it would make sense but once you add drives and wahs and EQs it makes things too confusing for the average user.
</blockquote>
</blockquote>

=Onboard switches=

The 4 foot switches have colored indicators, no scribble strips.

They support Tap and Hold functions (e.g. to switch channels). Watch the video at the bottom to se how to select channels.

=Remote control=

==MIDI==

The unit has 3.5 mm (1/8”) MIDI IN and OUT ports. Adapters are available at [https://shop.fractalaudio.com Fractal Audio].

The Boss BMIDI-5-35 cable has been tested and works with the VP4 to connect to 5-pin MIDI gear.

The VP4 supports:
* Sending and receiving Program Changes (PC),
* Receiving Control Changes (CC),
* MIDI-over-USB,
* MIDI clock (receive only, currently),
* Software MIDI Thru,

A table in the manual translates MIDI Program Changes to VP4 presets.

[[MIDI|Read more about MIDI.]]

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/post-2607516]
The VP4 supports MIDI over USB so it appears as MIDI ports in a DAW.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/vp4-fm3-pc-editor-connectivity-question.208827/post-2609096]
Messages sent to the VP4 via MIDI-over-USB are not echoed to its MIDI OUT port, and messages received at its MIDI IN port are not passed to the computer via USB.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/page-16#post-2609869]
The VP4 has fewer than 128 presets. MIDI Bank Select messages are not necessary to access all of its presets
</blockquote>
</blockquote>

==Expression pedals and external switches==

The unit supports two [[Expression pedals and external switches|expression pedal]] connections (TRS, 10–100 kΩ max), or two single TS [[Expression pedals and external switches|external switches]] (momentary or latching).

The unit does not provide [[FASLINK]] connections and therefore does not support connections to [[FC-6 and FC-12 foot controllers]].

==Amp switching==

The VP4 itself does not provide relays to switch amp channels.

It can connect through MIDI to a relay switcher to perform that duty.

Suggestions:
* [https://midisolutions.com/prodrel.htm MIDI Solutions Relay]
* [https://www.suhr.com/product/micro-midi-control/ Suhr MicroMIDI Control] 
* [https://voodoolab.com/product/control-switcher/ Voodoo Lab Control Switcher]
* [https://piratemidi.com/products/click-midi-interface-relay-switcher Pirate MIDI CLiCK]
* RJM Mini Amp Gizmo
* [https://emcustom.eu/amp-midi-switcher-interface.html EM]

=User interface=

Press Home+Save together to enter the Mode Select menu. Select between: Preset, Scene, Effects, Tuner/Tempo. The mode determines what's displayed on the LCD, how the Select knob operates and what the switches do.

The factory default ''Gig Mode'' makes it easy to select presets, scenes, effects, channels, tuner and tap tempo.



To edit parameters on the hardware, turn Select to highlight a block, press Enter to edit the block, turn the corresponding A-D knob to adjust value, page arrow to get to other pages.

When editing parameters on the hardware, press Page Left+Right together to enter Expert Edit mode. Expert Mode includes all parameters from the FM3, FM9 and Axe-Fx III. 

Press Enter+Exit together to enter the [[Setup menu]].

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-175#post-264972]
It uses a new, streamlined UI.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-252#post-270365]
Behind the scenes it's the architecture from the Axe-Fx III. There's still a grid and scenes and channels, etc. It's just that it's mostly hidden from the user and simplified.
</blockquote>
</blockquote>

=Presets, scenes and channels=

The unit has 104 [[Presets|presets]], supports 4 [[Scenes|scenes]] per preset and 4 [[Channels|channels]] per effect block.

The presets are organized into 26 banks, each identified by a letter from A to Z. Within each bank, there are four presets, numbered 1 through 4.

Presets can be configured for PRE, POST or 4CM.

Switching between presets, scenes and channels is gapless.

VP4 presets and blocks are not compatible with Fractal Audio's other processors, nor vice versa.

A list of VP4 factory presets is included at the the end of its [[Owners_Manuals|Owners manual]].

[https://www.fractalaudio.com/vp4-downloads/ Download the latest factory presets here]

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/page-4#post-2607598]
There are enough dissimilarities between the VP4 and the other products, that preset compatibility is not practical.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/page-8#post-2607767]
(are saved blocks (no entire presets) transferable?0<BR>
No, many of the effects have changes that facilitate the simplified BASIC mode interface.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/effects-library.208901/#post-2609875]
Block library entries are not cross compatible between VP4 and other products. Keeping the translator in sync across products/firmware versions is a can of worms, and b) the VP4 also has a few small differences in terms of how things are handled internally.
You can copy settings by hand and things will sound the same, but see the note in the purple box on p. 26 of the manual.
</blockquote>

</blockquote>

=Effects=

Supported effects blocks:

[[image:VP4-Edit-Block-Inventory.png|400px|link=]]

* [[Chorus block]]
* [[Compressor block]]
* [[Delay block]]
* [[Drive block]]
* [[Enhancer block]]
* [[Filter block]]
* [[Flanger block]]
* [[Formant block]]
* [[Gate/Expander block]]
* [[EQ|GEQ block]]
* [[Megatap Delay block]]
* [[Multitap Delay block]]
* [[EQ|PEQ block]]
* [[Phaser block]]
* [[Pitch block]]
* [[Plex Delay block]]
* [[Resonator block]]
* [[Reverb block]]
* [[Ring Modulator block]]
* [[Rotary block]]
* [[Synth block]]
* [[Tremolo/Panner block]]
* [[Volume/Panner block]]
* [[Wah block]]

[[image:VP4-Blocks.png|600px]]

There is a [[Noise gate]] at the input, before the 4 effects, and a [[EQ|10-band EQ]] at the output of each preset, which are always "on".

The VP4 does not provide amp and cab modeling. Also, compared to the FM3, there's no Multiband Compressor, Ten-Tap Delay, Mixer, Looper, Send/Return and Multiplexer.

Compared to the Axe-Fx, FM3 and FM9, the unit has:

* additional tweaked types, such as Vibrato and single voice Pitch types
* tweaked MIX Law for time-based effects
* Mode switch in some Drive types instead of multiple types (e.g. Timothy)
* some renamed types.

Effects 2+3+4 can be routed in parallel with the previous effect.

The blocks support Fractal Audio's system of [[Controllers and modifiers]].

<blockquote>
'''FRACTAL AUDIO QUOTES'''
<HR>
<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-169#post-264650]
(Can it run a Dual Detune, Reverb, Delay and a Plex Delay simultaneously, in a non-economy algo mode?)<BR>
Yes
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/post-2608372]
it is totally up to date with Axe-Fx III in all effects.
</blockquote>

<blockquote>
[https://thegearforum.com/threads/fractal-audio-systems-mystery-product-speculation.6102/page-243#post-269736]
We're already talking about adding a Looper and an IR player block.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/announcing-the-new-vp4-virtual-pedalboard-compact-multi-fx-processor.208713/post-2607516]
The VP4 uses the newest pitch detector from the Axe-Fx III.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/are-the-mix-levels-lower-than-the-equivalent-mix-levels-in-the-fm-and-iii.208988/#post-2611013]
The mix law in many blocks is different to suit the "all effects before the amp" crowd better.
</blockquote>

<blockquote>
[https://forum.fractalaudio.com/threads/are-the-mix-levels-lower-than-the-equivalent-mix-levels-in-the-fm-and-iii.208988/#post-2611186]
The sweetened mix law places a wider range of knob motion in the portion of the curve where the delay is quieter. This replicates the way pedals that are designed for use in front of an amp work because the amp's compression reduces the difference between the quiet echoes and the louder dry signal.
</blockquote>

</blockquote>

=VP4-Edit editor=

[[image:VP4-Edit.png|800px|link=]]

VP4-Edit is the [[Editors|editor]] for the VP4, with [[Fractal-Bot]] built-in. 

[https://www.fractalaudio.com/vp4-edit/ Download the current version of VP4-Edit here]

For Windows computers, the editor requires a driver. [https://www.fractalaudio.com/vp4-downloads Download the driver here]

=Videos=

[[video:Leon-VP4]]
[[video:Leon-VP4-Presetfromscratch]]
[[video:Leon-VP4-Library]]
[[video:Leon-VP4-Essentials]]
[[video:Leon-VP4-SPDIF]]
[[video:Coop-VP4]]
[[video:Cooper-VP4-Modes]]
[[video:LM-VP4]]
[[video:JC-LetsTalkAboutIt]]
[[video:JC-VP4-Gigged]]
[[video:Cordy-VP4]]
[[video:GearHippie-VP4-ChangingChannels]]
[[video:FSM-VP4]]
[[video:Aaron-VP4-Preset]]
[[video:AndyWood-VP4]]
[[video:AB-VP4]]

[[category:VP4]]
[[category:Sounds]]
[[category:Remote]]
[[category:All]]