Difference between revisions of "Midi control"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
==''MIDI Controller''==
 
==''MIDI Controller''==
 
[[Image:Midi_fx1.jpg|left|Axess FX1 MIDI Foot Controller]]
 
[[Image:Midi_fx1.jpg|left|Axess FX1 MIDI Foot Controller]]
 +
[[Image:Midi_fcb1010.jpg|left|Behringer FCB1010 MIDI Foot Controller]]
 +
[[Image:Midi_access.jpg|left|Rocktron All Access MIDI Foot Controller]]
 +
There are basically two methods<sup>1</sup> of controlling the Axe-FX via MIDI. The simpler of the two methods is covered in the [[Midi_foot | MIDI Footswitch]] article and involves sending a patch change message to the MIDI device. Ex: Press Button 2 and the footswitch changes to Preset 002 on the device.<sup>2</sup>
  
There are basically two methods<sup>1</sup> of controlling the Axe-FX via MIDI. The simpler of the two methods is covered in the [[Midi_foot | MIDI Footswitch]] article and involves sending a patch change message to the MIDI device. Ex: Press Button 2 and the footswitch changes to Preset 002 on the device.<sup>2</sup>
 
  
 
The second method uses a controller type system. Traditionally it is more complex, more expensive and yet more powerful. This method sends CC messages to the Axe. Here is an instance where CC does not mean 'Cliff Chase' but rather Continuous Controller. Simply meaning the device is sending a continuous message rather than a single message. This allows for constantly variable functions, such as a wah-wah pedal or volume control, to be utilized.
 
The second method uses a controller type system. Traditionally it is more complex, more expensive and yet more powerful. This method sends CC messages to the Axe. Here is an instance where CC does not mean 'Cliff Chase' but rather Continuous Controller. Simply meaning the device is sending a continuous message rather than a single message. This allows for constantly variable functions, such as a wah-wah pedal or volume control, to be utilized.

Revision as of 03:12, 23 February 2008

MIDI Controller

Axess FX1 MIDI Foot Controller
Behringer FCB1010 MIDI Foot Controller
Rocktron All Access MIDI Foot Controller

There are basically two methods1 of controlling the Axe-FX via MIDI. The simpler of the two methods is covered in the MIDI Footswitch article and involves sending a patch change message to the MIDI device. Ex: Press Button 2 and the footswitch changes to Preset 002 on the device.2


The second method uses a controller type system. Traditionally it is more complex, more expensive and yet more powerful. This method sends CC messages to the Axe. Here is an instance where CC does not mean 'Cliff Chase' but rather Continuous Controller. Simply meaning the device is sending a continuous message rather than a single message. This allows for constantly variable functions, such as a wah-wah pedal or volume control, to be utilized.

Furthermore rather than send a patch (preset) than contains a chorus, reverb or echo effect this controller will allow you to turn these effect on/off at will. This allows a concept, if you will, to constantly be designing your sound 'on the fly'. Many controllers offer the best of both worlds whereas you are able to establish several buttons for patch send and several buttons for CC operations.




1. Indicates 2 "common" methods realizing there exist more than a total of two methods.
2. This excludes instances of MIDI mapping and/or preset offset.