Difference between revisions of "Midi bome"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 13: Line 13:
 
==''Saving a Single Preset''==
 
==''Saving a Single Preset''==
 
1. Load the Bome Application.<br />
 
1. Load the Bome Application.<br />
[[Image:bome_001.jpg|200px|Choose your MIDI In Device]]
+
[[Image:bome_001.jpg|Choose your MIDI In Device]]<br />
<br />
 
 
2. Choose your MIDI In and MIDI Out device.<br />
 
2. Choose your MIDI In and MIDI Out device.<br />
 
3. Dial in a preset on the Axe-FX.<br />
 
3. Dial in a preset on the Axe-FX.<br />
 
4. Press Recall to load in buffer.<br />
 
4. Press Recall to load in buffer.<br />
 +
[[Image:bome_002.jpg|Dump MIDI to Bome In]]<br />
 
5. Press Utility Button and choose Dump Preset to Midi.<br />
 
5. Press Utility Button and choose Dump Preset to Midi.<br />
 +
[[Image:bome_003.jpg|Save MIDI file just imported into Bome]]<br />
 
6. On Bome choose File>Save MIDI In As and choose a filename.
 
6. On Bome choose File>Save MIDI In As and choose a filename.
  

Revision as of 02:02, 22 February 2008

MIDI Bome SendSX

The Bome SendSX is a simple MIDI Sysx protocol. It will allow you to do the following:

1. Upload new firmware to the Axe-FX.
2. Upload or Download Preset Banks.
3. Upload or Download Single Presets.

Download and Install Bome

Go to the Bome website and download the SendSX program (currently SendSX130beta2.exe) to your computer. Double click and install the program.

Saving a Single Preset

1. Load the Bome Application.
Choose your MIDI In Device
2. Choose your MIDI In and MIDI Out device.
3. Dial in a preset on the Axe-FX.
4. Press Recall to load in buffer.
Dump MIDI to Bome In
5. Press Utility Button and choose Dump Preset to Midi.
Save MIDI file just imported into Bome
6. On Bome choose File>Save MIDI In As and choose a filename.

Restore a Single Preset

1. Load the Bome Application.
2. Choose your MIDI In and MIDI Out device.
3. Dial in your desired preset location on the Axe-FX.
4. Caution: The preset at that location will be overwritten (when you hit save).
5. On Bome choose File> Open > and choose file from computer.
6. On Bome Hit Send(F4).
7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your safety net.
8. Choose Store to save preset OR roll dial 1 notch off and back on to cancel this transfer.