Difference between revisions of "Midi bome"

From Fractal Audio Wiki
Jump to navigation Jump to search
m (minor wording edit)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==''MIDI Bome SendSX''==
 
==''MIDI Bome SendSX''==
  
The Bome SendSX is a simple MIDI Sysx protocol. It will allow you to do the following:
+
The Bome SendSX is a simple MIDI Sysex protocol. It will allow you to do the following:
  
 
1. Upload new firmware to the Axe-FX.<br />
 
1. Upload new firmware to the Axe-FX.<br />
Line 12: Line 12:
  
 
==''Saving a Single Preset''==
 
==''Saving a Single Preset''==
1. Load the Bome Application.<br /><br />
+
1. On Computer: Load the Bome Application.<br /><br />
 
[[Image:bome_001.jpg|Choose your MIDI In Device]]<br />
 
[[Image:bome_001.jpg|Choose your MIDI In Device]]<br />
2. Choose your MIDI In and MIDI Out device.<br /><br />
+
2. On Bome: Choose your MIDI In and MIDI Out device.<br /><br />
3. Dial in a preset on the Axe-FX.<br /><br />
+
3. On Axe: Dial in a preset you want to save.<br /><br />
4. Press Recall to load in buffer.<br /><br />
+
4. On Axe: Press Recall to load preset into buffer.<br /><br />
 
[[Image:bome_002.jpg|Dump MIDI to Bome In]]<br />
 
[[Image:bome_002.jpg|Dump MIDI to Bome In]]<br />
5. Press Utility Button and choose Dump Preset to Midi.<br /><br />
+
5. On Axe: Press Utility Button and choose Dump Preset to Midi.<br />
 +
You will see something similar to above screen on Bome.<br /><br />
 
[[Image:bome_003.jpg|Save MIDI file just imported into Bome]]<br />
 
[[Image:bome_003.jpg|Save MIDI file just imported into Bome]]<br />
6. On Bome choose File>Save MIDI In As and choose a filename.<br /><br />
+
6. On Bome: Choose File>Save MIDI In As and choose a filename.<br /><br />
 
[[Image:bome_004.jpg|Choose location on your computer to save file.]]<br />
 
[[Image:bome_004.jpg|Choose location on your computer to save file.]]<br />
7. Choose a location on your computer to save file to.<br />
+
7. On Computer: Choose a location (ex:folder) to save file to.<br />
  
 
==''Restore a Single Preset''==
 
==''Restore a Single Preset''==
1. Load the Bome Application.<br /><br />
+
1. On Computer: Load the Bome Application.<br /><br />
2. Choose your MIDI In and MIDI Out device (same as Saving).<br /><br />
+
2. On Bome: Choose your MIDI In and MIDI Out device (same as above).<br /><br />
3. Dial in your desired preset location on the Axe-FX.<br /><br />
+
3. On Axe: Dial in your desired preset location you want to store to.<br /><br />
 
4. Caution: The preset at that location will be overwritten (when you hit save).<br /><br />
 
4. Caution: The preset at that location will be overwritten (when you hit save).<br /><br />
 
[[Image:bome_005.jpg|Choose location on your computer to save file.]]<br />
 
[[Image:bome_005.jpg|Choose location on your computer to save file.]]<br />
5. On Bome choose File> Open > and choose a preset file (sysx) from computer.<br /><br />
+
5. On Bome: Choose File> Open > and choose a preset file (syx) from computer.<br /><br />
 
[[Image:bome_006.jpg|Send file to Axe at the dialed in preset location.]]<br />
 
[[Image:bome_006.jpg|Send file to Axe at the dialed in preset location.]]<br />
6. On Bome Hit Send(F4).<br /><br />
+
6. On Bome: Hit Send(F4).<br /><br />
7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your safety net.<br /><br />
+
7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your '''safety net'''.<br /><br />
8. Choose Store to save preset OR '''roll dial 1 notch to cancel''' this transfer.
+
8. On Axe: Choose Store to save preset OR '''roll dial 1 notch to cancel'''.
  
  
Line 40: Line 41:
  
 
[[Category:MIDI]]
 
[[Category:MIDI]]
 +
 +
<!-- direct discussions or corrections can be emailed to mwd [at] yucca [dot] net -->

Latest revision as of 03:18, 3 March 2008

MIDI Bome SendSX

The Bome SendSX is a simple MIDI Sysex protocol. It will allow you to do the following:

1. Upload new firmware to the Axe-FX.
2. Upload or Download Preset Banks.
3. Upload or Download Single Presets.

Download and Install Bome

Go to the Bome website and download the SendSX program (currently SendSX130beta2.exe) to your computer. Double click and install the program.

Saving a Single Preset

1. On Computer: Load the Bome Application.

Choose your MIDI In Device
2. On Bome: Choose your MIDI In and MIDI Out device.

3. On Axe: Dial in a preset you want to save.

4. On Axe: Press Recall to load preset into buffer.

Dump MIDI to Bome In
5. On Axe: Press Utility Button and choose Dump Preset to Midi.
You will see something similar to above screen on Bome.

Save MIDI file just imported into Bome
6. On Bome: Choose File>Save MIDI In As and choose a filename.

Choose location on your computer to save file.
7. On Computer: Choose a location (ex:folder) to save file to.

Restore a Single Preset

1. On Computer: Load the Bome Application.

2. On Bome: Choose your MIDI In and MIDI Out device (same as above).

3. On Axe: Dial in your desired preset location you want to store to.

4. Caution: The preset at that location will be overwritten (when you hit save).

Choose location on your computer to save file.
5. On Bome: Choose File> Open > and choose a preset file (syx) from computer.

Send file to Axe at the dialed in preset location.
6. On Bome: Hit Send(F4).

7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your safety net.

8. On Axe: Choose Store to save preset OR roll dial 1 notch to cancel.