Difference between revisions of "Midi bome"

From Fractal Audio Wiki
Jump to navigation Jump to search
m
Line 41: Line 41:
  
 
[[Category:MIDI]]
 
[[Category:MIDI]]
 +
 +
<!-- direct discussions or corrections can be emailed to mwd [at] yucca [dot] net -->

Revision as of 13:51, 29 February 2008

MIDI Bome SendSX

The Bome SendSX is a simple MIDI Sysx protocol. It will allow you to do the following:

1. Upload new firmware to the Axe-FX.
2. Upload or Download Preset Banks.
3. Upload or Download Single Presets.

Download and Install Bome

Go to the Bome website and download the SendSX program (currently SendSX130beta2.exe) to your computer. Double click and install the program.

Saving a Single Preset

1. On Computer: Load the Bome Application.

Choose your MIDI In Device
2. On Bome: Choose your MIDI In and MIDI Out device.

3. On Axe: Dial in a preset you want to save.

4. On Axe: Press Recall to load preset into buffer.

Dump MIDI to Bome In
5. On Axe: Press Utility Button and choose Dump Preset to Midi.
You will see something similar to above screen on Bome.

Save MIDI file just imported into Bome
6. On Bome: Choose File>Save MIDI In As and choose a filename.

Choose location on your computer to save file.
7. On Computer: Choose a location (ex:folder) to save file to.

Restore a Single Preset

1. On Computer: Load the Bome Application.

2. On Bome: Choose your MIDI In and MIDI Out device (same as above).

3. On Axe: Dial in your desired preset location you want to store to.

4. Caution: The preset at that location will be overwritten (when you hit save).

Choose location on your computer to save file.
5. On Bome: Choose File> Open > and choose a preset file (sysx) from computer.

Send file to Axe at the dialed in preset location.
6. On Bome: Hit Send(F4).

7. The preset will be sent to the current location your Axe-FX is residing on. The Edited light will now be lit. This preset is not yet saved which is your safety net.

8. On Axe: Choose Store to save preset OR roll dial 1 notch to cancel.