Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Spillover

From Fractal Audio Wiki
Revision as of 14:21, 4 May 2015 by Yek (talk | contribs)
Jump to navigation Jump to search

H effects.png

Spillover: in the Axe-Fx II owner's manual

  • 5.6 Delay [DLY]
  • 5.27 Reverb [REV]
  • 16.14 Setting Up Spillover

Spillover: global on/off switch

  • Spillover is enabled or disabled in the Global menu.

Spillover: limitations

  • Multi Delay and Megatap Delay don’t support spillover.
  • Spillover may be affected when switching between X/Y states, if drastically different algorithms exist between the two states. For example, if one scene has a Digital Delay and the next scene uses a Tape Delay, spillover will probably not function correctly as these modes use different algorithms.
  • User: "I have two patches that both has delay blocks disabled and when I switch between these patches via MFC the delay spillover sometimes kicks in really loud." Cliff: "This can happen if you rapidly switch between presets many times. The unit requires a small amount of time between preset changes to clear unused buffer space. This is done as a background task." source

Spillover: preventing volume bursts when switching presets

  • If you use Mix and Level to dial in the effects level, the volume level of the reverb and/or delay trails may change when switching presets. This can be prevented by keeping Mix and Level at fixed values, and using Input Gain to set the desired effects level. source

Spillover: various tips