Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Difference between revisions of "Ring Modulator block"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 92: Line 92:
 
==Pedal control==
 
==Pedal control==
  
Attach a pedal to the FREQ parameter, to create an "Evil Whammy" effect.
+
Attach a pedal to the FREQ parameter, to create a special effect.
  
 
==Multitap Delay==
 
==Multitap Delay==

Revision as of 10:42, 8 August 2019

Ringmod block.png

Available on which products

  • Axe-Fx III: 1 block
  • FM3: yes @@
  • Axe-Fx II: 1 block
  • AX8: 1 block
  • FX8: 1 block

Channels or X/Y switching

  • Axe-Fx III and FM3: 2 channels
  • Axe-Fx II: no
  • AX8: no
  • FX8: no

Purpose

A Ring Modulator produces the sum and difference of frequencies in multiple waveforms. This often results in 'robotic' sounds.

Wikipedia

Types

The Ring Modulator has three types:

  • Classic
  • SSB Upper
  • SSB Lower

“SSB Upper” and “SSB Lower” select the upper and lower sidebands of the modulation.

Parameters

Parameters table

Parameter Axe-Fx III / FM3 Axe-Fx II AX8 / FX8
Type yes
Frequency yes
Frequency Multiplier yes
High Cut Frequency yes
Pitch Tracking yes

Pitch Tracking

When enabled, the frequency of the oscillator tracks the pitch of the notes on the fretboard.

Tips and tricks

Octaver

The Ring Modulator works great as an Octaver (adding a low octave). Enable Pitch Tracking, set FREQ to 500 Hz, and turn down HIGH CUT FREQUENCY to 500 Hz or lower.

Tremolo

You can conturn the Ring Modulator into a Tremolo, by turning down FREQUENCY all the way.

Fixed Flanger

"The Resonator block is basically a type of fixed flanger. Well, four of them in parallel actually." source

Pedal control

Attach a pedal to the FREQ parameter, to create a special effect.

Multitap Delay

The Multitap Delay can apply a ring modulation effect to delay trails.