Always consult the official Owners Manuals first
Difference between revisions of "Compressor block"
(→Keeley) |
|||
(18 intermediate revisions by the same user not shown) | |||
Line 30: | Line 30: | ||
=Compressor types= | =Compressor types= | ||
− | Firmware Ares provides these types: | + | Firmware Ares provides these Compressor types: |
− | + | ||
+ | '''Studio Compressor''' – the same compressor type as in earlier processors | ||
+ | |||
'''Pedal Compressor 1 and 2''' – "Pedal 2" uses a different algorithm which is smoother and pumps less than "Pedal 1". CPU usage by both types is much less than the "Studio" type | '''Pedal Compressor 1 and 2''' – "Pedal 2" uses a different algorithm which is smoother and pumps less than "Pedal 1". CPU usage by both types is much less than the "Studio" type | ||
Line 47: | Line 49: | ||
<blockquote>"The LA-2A, CL1B, et. al. are high-end studio compressors that use optical circuits." [http://forum.fractalaudio.com/threads/axe-fx-ii-quantum-rev-7-00-firmware-release.124944/page-28#post-1490770 source] </blockquote> | <blockquote>"The LA-2A, CL1B, et. al. are high-end studio compressors that use optical circuits." [http://forum.fractalaudio.com/threads/axe-fx-ii-quantum-rev-7-00-firmware-release.124944/page-28#post-1490770 source] </blockquote> | ||
+ | |||
+ | <blockquote>AustinBuddy: "I've been having great 1176-style success with the newer Analog Compressor model in the Compressor block. Threshold around -20db, ratios of 4:1 to "Infinite" for squash, add about 3-4 db make-up gain." [https://forum.fractalaudio.com/threads/how-about-we-pool-knowledge-and-understand-the-compressor-block-options-better.150711/post-1816302 source]</blockquote> | ||
[http://www.musictech.net/2014/05/altec-436/ About the Altec Lansing 436C compressor] | [http://www.musictech.net/2014/05/altec-436/ About the Altec Lansing 436C compressor] | ||
Line 214: | Line 218: | ||
<blockquote>"Levels can be and are frequently above 0. Any compressor that has a max level of zero is not calibrated in dBu."</blockquote> | <blockquote>"Levels can be and are frequently above 0. Any compressor that has a max level of zero is not calibrated in dBu."</blockquote> | ||
+ | |||
+ | <blockquote>"The output level is irrelevant. It's just a number." [https://forum.fractalaudio.com/threads/compressor-block-problem.153997/post-1830564 source]</blockquote> | ||
+ | |||
+ | <blockquote>"This is the right way to set the compressor output level: | ||
+ | # Bypass everything but the compressor block. | ||
+ | # Dial in the desired threshold and ratio. | ||
+ | # Alternate between bypassing and engaging the block while strumming hard. Adjust the output level until the volume is the same." [https://forum.fractalaudio.com/threads/compressor-block-problem.153997/post-1830557 source]</blockquote> | ||
==Auto Attack/Release== | ==Auto Attack/Release== | ||
Line 226: | Line 237: | ||
You can use the signal that enters the grid to feed the compressor, even if the compressor block is placed further upon the grid, through the Sidechain Select parameter. | You can use the signal that enters the grid to feed the compressor, even if the compressor block is placed further upon the grid, through the Sidechain Select parameter. | ||
+ | |||
+ | ==Sidechain High Cut== | ||
+ | |||
+ | <blockquote>"You can use the Compressor block as a "Clarity" control. Set the sidechain high-cut to around 200 Hz. Now low notes will get compressed more than high notes. This will make the lows clearer when digging in. This is like a variable high-pass filter that gets more intense the harder you play. When you play lightly the compressor will do nothing. As you play harder low frequencies will have less gain than high frequencies. For a more intense effect use the filter section of the sidechain. Set the type to lowpass and adjust the frequency to taste." [https://forum.fractalaudio.com/threads/compressor-trick.153988/post-1830355 source]</blockquote> | ||
==Release (Pedal mode)== | ==Release (Pedal mode)== | ||
Line 246: | Line 261: | ||
The default Lookahead value is 0. | The default Lookahead value is 0. | ||
+ | |||
+ | ==Auto-Gain== | ||
+ | |||
+ | <blockquote>"The only thing auto-gain does is attempt to keep the output level the same as the ratio and/or threshold is changed. It has to make assumptions about the incoming level which is just a guess since every guitar is different. The threshold of the Axe-Fx III differs from the Axe-Fx II by about 20 dB so if you are copying presets from the II you need to change your threshold accordingly." [https://forum.fractalaudio.com/threads/compressor-block-problem.153997/post-1830554 source]</blockquote> | ||
==Fast RMS detector== | ==Fast RMS detector== | ||
Line 302: | Line 321: | ||
* [http://reverb.com/news/compressor-vs-limiter-whats-the-difference Compressor vs Limiter: what's the difference] | * [http://reverb.com/news/compressor-vs-limiter-whats-the-difference Compressor vs Limiter: what's the difference] | ||
* [https://codepen.io/animalsnacks/full/VRweeb Audio compression visualizer] | * [https://codepen.io/animalsnacks/full/VRweeb Audio compression visualizer] | ||
+ | * [https://forum.fractalaudio.com/threads/how-about-we-pool-knowledge-and-understand-the-compressor-block-options-better.150711 Forum thread with tips] | ||
[[category:Axe-Fx2]] | [[category:Axe-Fx2]] |
Revision as of 08:57, 19 October 2019
Contents
- 1 Available on which products
- 2 Channels or X/Y switching
- 3 Compressor block in firmware Ares
- 4 Compressor types
- 5 Position of the Compressor block on the grid
- 6 Compressor block versus Amp block
- 7 Multiband compression
- 8 Parameters
- 9 Compression tips and tricks
- 10 More information about compression
Available on which products
- Axe-Fx III: 2 blocks
- FM3: yes @@
- Axe-Fx II: 2 blocks
- FX8: 2 blocks
- AX8: 1 block
Channels or X/Y switching
- Axe-Fx III and FM3: 4 channels
- Axe-Fx II: X/Y
- FX8: X/Y
- AX8: X/Y
There's no MIDI CC available for X/Y switching on the Axe-Fx II XL/XL+.
Compressor block in firmware Ares
- The old RMS detector has been removed. "RMS" is the same as "Fast RMS" in the AX8 and Axe-Fx II.
- An "E-L Panel" mode has been added to the optical compressor.
- There's a single optical type.
- Level control has been removed.
- The Studio Compressor has been changed; the threshold has been calibrated and its range has been adjusted.
- EQ-ing tools haven been added.
- Additional compressor types include Tube and Analog.
Compressor types
Firmware Ares provides these Compressor types:
Studio Compressor – the same compressor type as in earlier processors
Pedal Compressor 1 and 2 – "Pedal 2" uses a different algorithm which is smoother and pumps less than "Pedal 1". CPU usage by both types is much less than the "Studio" type
Dynamics Processor – allows compression or expansion with a single control. When set to negative values, the block compresses the signal. When set to positive values, the block expands the signal
Optical Compressor – based on classic optical tube compressors, famed for their smooth sound. Use it before the Amp block to smooth out your licks and increase sustain, use it after the Amp block for instant “Hit Record” sound
Tube Compressor – based on classic tube compressors like the Altec Lansing 436C. Since this type uses “variable mu” processing it may add subtle, and possibly desirable, distortion to the audio
Analog Compressor – natural soft-knee response, capturing the vibe of the classic compressors of the 70s and 80s
(Axe-Fx II) "Optical 1 uses a full-wave rectifier as a detector (peak detector). Optical 2 uses a true RMS detector. The LA-2A and many other compressors use rectifiers as detectors because it's easy and simple. Technically true-RMS detectors are "better" but they are difficult to implement in analog hardware. Whether or not true-RMS is better in actual real-world applications is debatable. There are those that claim that true-RMS detectors more closely replicate the natural compression behavior of the human auditory system. Peak detectors respond more rapidly to transients while RMS detectors have a smoother behavior. The only way to know which you like better is to try them." source
(About the optical con compressor) "It's not an "LA-2A" but it can sound like one. It's a generic optical compressor that can be adjusted to sound like a variety of compressors. It has adjustable attack, release and compression." source
"The LA-2A, CL1B, et. al. are high-end studio compressors that use optical circuits." source
AustinBuddy: "I've been having great 1176-style success with the newer Analog Compressor model in the Compressor block. Threshold around -20db, ratios of 4:1 to "Infinite" for squash, add about 3-4 db make-up gain." source
About the Altec Lansing 436C compressor
Position of the Compressor block on the grid
In traditional rigs the compressor pedal goes between guitar and amp. You can do that in your preset too.
Placing the Compressor block after the Amp block makes it interfere less with the amp dynamics. When doing this, set its input to Line instead of Instrument (Axe-Fx III: n/a).
Compressor block versus Amp block
The Amp block also has built-in compression:
Dynamics – Preamp compression, the same as the Compressor block's Dynamics mode
Output Comp – Output compression. Great to beef up clean tones
"The Dynamics knob in the Amp block does the same thing as the Dynamics mode of the compressors so you can save a block that way." source
"The Output Compressor is a simplified version of the compressor block." source
Both types increase CPU usage.
Multiband compression
Some processors have a separate Multiband Compressor block.
Parameters
The parameters are explained in the Owner's Manual.
Parameters table
Parameter | Axe-Fx III / FM3 | Axe-Fx II | AX8 / FX8 |
---|---|---|---|
Type | yes | yes | yes |
CONFIG | |||
Threshold | yes | yes | yes |
Ratio | yes | ||
Compression | yes | ||
Dynamics | yes | ||
Attack Time | yes | yes | yes |
Release Time | yes | yes | yes |
Output Level | yes | yes | yes |
Auto Attack/Release | yes | yes | yes |
Auto Makeup (type: Studio) | yes | yes | yes |
Look-Ahead Time | yes | yes | yes |
Detector Type, Knee Type | yes | yes | yes |
Light Type (Optical) | yes | ||
SIDECHAIN | |||
Sidechain Source | yes | yes | yes |
Low Cut, High Cut | yes | ||
Emphasis | yes | ||
Frequency, Q, Gain | yes | ||
Filter Type | yes | yes | |
MIX | |||
Mix | yes | yes | yes |
Threshold
In firmware Ares, a Threshold parameter has been added to all types. In existing presets containing a Compressor type that didn’t have a Threshold yet, the value is set to -60. Adjust if necessary.
"The Threshold is the input level at which the output starts to compress as given by Ratio control."
"If defaults to all the way down on old patches so that it doesn't change the sound of them." source
Level
"Levels can be and are frequently above 0. Any compressor that has a max level of zero is not calibrated in dBu."
"The output level is irrelevant. It's just a number." source
"This is the right way to set the compressor output level:
- Bypass everything but the compressor block.
- Dial in the desired threshold and ratio.
- Alternate between bypassing and engaging the block while strumming hard. Adjust the output level until the volume is the same." source
Auto Attack/Release
Attack and Release vary with program material as a percentage of the set values.
Mix
Compressors are used mostly as a 100% wet effect. But there are a few compressors with Blend or Mix controls. Use the Mix parameter in the model.
Sidechain Select
You can use the signal that enters the grid to feed the compressor, even if the compressor block is placed further upon the grid, through the Sidechain Select parameter.
Sidechain High Cut
"You can use the Compressor block as a "Clarity" control. Set the sidechain high-cut to around 200 Hz. Now low notes will get compressed more than high notes. This will make the lows clearer when digging in. This is like a variable high-pass filter that gets more intense the harder you play. When you play lightly the compressor will do nothing. As you play harder low frequencies will have less gain than high frequencies. For a more intense effect use the filter section of the sidechain. Set the type to lowpass and adjust the frequency to taste." source
Release (Pedal mode)
"Pedal compressors typically have very long release times so the time is scaled by 10 for pedal mode. The time in studio mode is accurate to within a microsecond." source
"The times are the classic "time constants" for analog circuits, i.e. the time it takes for a signal to settle to 37% of it's final value (e^-1)." source
Emphasis
This boosts the high frequencies prior to compression and then lowers them after.
Filter
Filter is a low-cut filter which can be used to tailor the response of the various compressor types to different material.
In firmware Ares, the Filter parameter has been replaced with EQ-ing tools.
Lookahead
The default Lookahead value is 0.
Auto-Gain
"The only thing auto-gain does is attempt to keep the output level the same as the ratio and/or threshold is changed. It has to make assumptions about the incoming level which is just a guess since every guitar is different. The threshold of the Axe-Fx III differs from the Axe-Fx II by about 20 dB so if you are copying presets from the II you need to change your threshold accordingly." source
Fast RMS detector
The “Fast RMS” Detector type in the Studio Comp mimics the fast detectors in classic rack-mount compressors. It uses less CPU than the other detectors.
In firmware Ares, there's only "RMS", which is the same as "Fast RMS" in the AX8, FX8 and Axe-Fx II.
Compression tips and tricks
Emulating the Keeley Compressor
Admin M@ (source):
"I use "Analog Compressor" for Keeley sounds. It works great! Because I play vintage output guitars, I like to boost the level going in by adjusting the output of the input block before it. You can try "Auto Att/Rel", or use the published "classic" Keeley recipes*. Personally, however, I prefer a faster release, in the neighborhood of 75ms or less.
- Attack Time: typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
- Release Time: 80ms for 10dB, 160ms for 20dB, 240ms for 30dB"
80's clean compression
For that ultra-compressed '80s clean guitar tone, check out factory preset "Clean Pop Rhythm".
Emulating a Boss Compressor/Sustainer
"The PEDAL 1 type in the AX8 is comparable to the CS1/2/3. The COMPression knob is equivalent to the SUSTAIN knob on the Boss pedal. Release is not sustain. Leave it at the default setting. When using this effect, I like to increase level before the compressor. One way to do this is to increase the output level of the noise gate on the input block." source
Using the compressor as a limiter
There's no dedicated brickwall limiter in the unit, but the compressor can be used as such.
"Setting the RATIO to “INFINITY” turns the compressor into a “limiter,” reducing any level above the threshold to the threshold, applying a sort of “ceiling” or “brick-wall limiting” above which nothing can rise."
Forum discussion about limiting
Pumping
From the Axe-Fx III manual:
"Pumping is an effect that occurs when a sudden strong peak causes a compressor to reduce levels such that the entire signal audibly dips and then returns. The event that triggers pumping might be brief, and can be in any part of the frequency spectrum. To reduce pumping caused by low or high end spikes, you can use sidechain filtering to make the compressor less sensitive to such peaks. Very fast and very slow release times tend to make a compressor seem more resistant to pumping, but can bring issues of their own. Another possibility is to switch to a multiband compressor, which handles lows, mids and highs individually. Now, it cannot go without saying that pumping can also be used as an effect in itself, as when a kick drum is set up as a sidechain source to give electric guitars a bouncing sound common in dance and industrial music."
De-essing
"De-essing can be done by adjusting the side-chain EQ in the compressor block." source
More information about compression
- Radley's compression tips
- Compressor FAQ
- Danny Danzi's video tutorial
- Wikipedia: dynamic range compression
- Settings for country twang
- Emulating the Solo Dallas Schaffer Replica, more information
- Pete Thorn explains compression
- Compressor vs Limiter: what's the difference
- Audio compression visualizer
- Forum thread with tips