Global blocks

Manual

• 6 Global Blocks
• 13 Backing Up and Restoring

User contributions

Global Blocks

• Global Blocks are discussed in this Wicked Wiki thread.
• View this video (Katsu Kuri Media).

Global Blocks: exporting or backing up

• When backing up a preset with global blocks, you also always need to backup the System too, to restore the stored data.

Global Blocks: modifier parameters and controller settings

• Modifier settings are not saved within Global Blocks. The same goes for controllers settings. You can use Effect Recall to copy controller settings from one preset to another.

Global Blocks: global control of Bypass state

• The state (On/Off) of a Global block is saved per preset. This means you can set Global Block #1 Off in one preset, and On in another.
• If you want global control of the bypass state of an effect block, here's a solution:
  1. Attach the Bypass parameter of the effect block to an External controller.
  2. In the I/O menu, switch the External controller between 0% or 100% to change the effect's Bypass state. Or assign a switch on your foot controller to the MIDI CC of the External Controller to switch the block.
  3. This works with global and non-global blocks, and across all presets with the same effect block.

Global Blocks: Noise Gate and Level

• The Noise Gate in the GTE/IN menu, including the Level control on that page, can also be linked to a global block.

Global Blocks: unlinking

• You can unlink a global block as follows:
  • within the global block menu
  • by using STRIP ALL GLOBAL DATA in Utility
  • by pressing Enter while in the Recall menu
  • by using Axe-Edit or Fractal-Bot.