Always consult the official Owners Manuals first
Filter block
Jump to navigation
Jump to search
Manual
User contributions
Using the Filter
- The Filter is a very versatile effect. For example, it can be used:
- As an one-band equalizer
- To boost the input of an amp block
- To boost the signal level for leads
- As a high-pass or lo-pass filter
- As an envelope filter
Filter and X/Y
- X/Y-switching is supported by the XL only.
Tilt EQ
- The Tilt EQ is a slope filter that allows broad adjustment of the tone using just two parameters: Frequency and Gain. The Gain parameter sets the maximum gain of the filter relative to the center frequency. For example, a gain of 10 dB would set the maximum gain to 10 dB. The gain at the center frequency would be 0 dB and the minimum gain would be -10 dB, therefore a total of 20 dB of EQ would be applied.