Always consult the official Owners Manuals first

Difference between revisions of "Amplifier models list"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 34: Line 34:
 
# Try with a Treble Booster Drive block befor the amp
 
# Try with a Treble Booster Drive block befor the amp
 
# Despite the fact that it was originally designed for bass guitars, it was more famous for its use with electric guitars
 
# Despite the fact that it was originally designed for bass guitars, it was more famous for its use with electric guitars
−
# Cliff: "Definitely not your father's Bassman. Has a pissed-off Marshall vibe to it." [http://forum.fractalaudio.com/axe-fx-ii/35930-list-models-5.html#post490912 Source]
+
# Cliff: "Definitely not your father's Bassman. Has a pissed-off Marshall vibe to it" [http://forum.fractalaudio.com/axe-fx-ii/35930-list-models-5.html#post490912 Source]
 
# [http://www.fender.com Fender website]
 
# [http://www.fender.com Fender website]
 
# [http://en.wikipedia.org/wiki/Fender_Bassman Wikipedia]
 
# [http://en.wikipedia.org/wiki/Fender_Bassman Wikipedia]
Line 76: Line 76:
 
# Original controls for normal channel: Volume, Bass, Middle, Treble, Bright switch (works with Volume below 6), no Master
 
# Original controls for normal channel: Volume, Bass, Middle, Treble, Bright switch (works with Volume below 6), no Master
 
# Bright default: Off
 
# Bright default: Off
−
# For authentic tone: crank the Master volume, use Drive for volume
+
# For authentic tone: crank the Master, use Drive for volume
 
# The Fender Twin Reverb is considered a standard model for players seeking a clean sound
 
# The Fender Twin Reverb is considered a standard model for players seeking a clean sound
 
# [http://www.fender.com Fender website]
 
# [http://www.fender.com Fender website]
Line 133: Line 133:
 
# Original controls: Volume, Cut (== Presence), Bass, Treble, no Master
 
# Original controls: Volume, Cut (== Presence), Bass, Treble, no Master
 
# Bright default: On
 
# Bright default: On
−
# For authentic tone: crank the Master, set Drive to taste, Mids at noon. Use HiCut/Presence to cut treble  
+
# For authentic tone: turn up the Master, set Drive to taste, Mids at noon. Use HiCut/Presence to cut treble  
 
# Instead of turning up Drive, try boosting the input signal before the amp, for example with a Tape Dist or FET Boost Drive block
 
# Instead of turning up Drive, try boosting the input signal before the amp, for example with a Tape Dist or FET Boost Drive block
 
# [http://www.voxamps.com Vox website]
 
# [http://www.voxamps.com Vox website]
Line 167: Line 167:
 
# [http://www.marshallamps.com Marshall website]
 
# [http://www.marshallamps.com Marshall website]
 
# [http://en.wikipedia.org/wiki/Marshall_1959 Wikipedia]
 
# [http://en.wikipedia.org/wiki/Marshall_1959 Wikipedia]
−
# Cliff: "The Plexi Normal has no treble speaker that's why it's bassy. (...) with Input 2 on a Plexi (which is the Plexi Treble model). FWIW, the Plexi Normal channel sounds identical to my reference amp which is particularly good copy." [http://forum.fractalaudio.com/axe-fx-ii/35997-axe-fx-ii-technical-questions-thread-159.html#post520764 Source]
+
# Cliff: "The Plexi Normal has no treble speaker that's why it's bassy. (...) with Input 2 on a Plexi (which is the Plexi Treble model). FWIW, the Plexi Normal channel sounds identical to my reference amp which is a particularly good copy." [http://forum.fractalaudio.com/axe-fx-ii/35997-axe-fx-ii-technical-questions-thread-159.html#post520764 Source]
 
# Cliff (about the Plexi in the Standard/Ultra): "Cliff: "One of the first mods people make to real 'Plexi' Marshalls is to "clip the bright cap". The bright cap varied over the years, supposedly depending on what was lying around in the shop. The model defaults to the bright cap in the circuit. If you turn the bright off you're effectively clipping the bright cap. With the bright cap in Marshalls can be very bright and harsh. However, if you crank the Master you might find the extra brightness helps compensate for the power amp getting darker."
 
# Cliff (about the Plexi in the Standard/Ultra): "Cliff: "One of the first mods people make to real 'Plexi' Marshalls is to "clip the bright cap". The bright cap varied over the years, supposedly depending on what was lying around in the shop. The model defaults to the bright cap in the circuit. If you turn the bright off you're effectively clipping the bright cap. With the bright cap in Marshalls can be very bright and harsh. However, if you crank the Master you might find the extra brightness helps compensate for the power amp getting darker."
 +
# Use two amps in a single preset, one set to Normal and one set to Teble, to emulate what they often with the real amp: jumping both channels
 
# To recreate the Plexi 2 sim from the Standard/Ultra, use Plexi Treble and ([http://forum.fractalaudio.com/axe-fx-ii-wish-list/39729-plexi-2-model.html#post538964 Source]):
 
# To recreate the Plexi 2 sim from the Standard/Ultra, use Plexi Treble and ([http://forum.fractalaudio.com/axe-fx-ii-wish-list/39729-plexi-2-model.html#post538964 Source]):
 
#* Lower damp to 4.76
 
#* Lower damp to 4.76
Line 193: Line 194:
 
# [http://en.wikipedia.org/wiki/Marshall_Amplification Wikipedia]
 
# [http://en.wikipedia.org/wiki/Marshall_Amplification Wikipedia]
 
# Cliff: "The 1987X MOD model is based on a 1987X Plexi Reissue with C5 removed (which is the most common mod done to this amp)"
 
# Cliff: "The 1987X MOD model is based on a 1987X Plexi Reissue with C5 removed (which is the most common mod done to this amp)"
 +
# Use two amps in a single preset, one set to Normal and one set to Teble, to emulate what they often with the real amp: jumping both channels
  
 
==Brit 800==
 
==Brit 800==
Line 207: Line 209:
 
# [http://www.marshallamps.com Marshall website]
 
# [http://www.marshallamps.com Marshall website]
 
# [http://en.wikipedia.org/wiki/Marshall_Amplification Wikipedia]
 
# [http://en.wikipedia.org/wiki/Marshall_Amplification Wikipedia]
−
# Try with a TS808 or Tube Drive block. Set the Drive block to zero Drive and full Level
+
# Try with a TS808 or Tube Drive block, set the Drive block to zero Drive and full Level
−
# Cliff: "It is a very bright model. However, it sounds exactly like the amp it was based on. If it is too bright, you can adjust the various tone controls and parameters to  
+
# Cliff: "It is a very bright model. However, it sounds exactly like the amp it was based on. If it is too bright, you can adjust the various tone controls and parameters to reduce the brightness to your tastes. They are designed to be run loud and the brightness decreases as the MV is increased. The sound of 80's hair metal for sure." [http://forum.fractalaudio.com/axe-fx-ii/38498-afxii-jcm800-model.html Source]
−
reduce the brightness to your tastes. They are designed to be run loud and the brightness decreases as the MV is increased. The sound of 80's hair metal for sure." [http://forum.fractalaudio.com/axe-fx-ii/38498-afxii-jcm800-model.html Source]
 
 
# [http://forum.fractalaudio.com/axe-fx-ii/38498-afxii-jcm800-model.html User comments]
 
# [http://forum.fractalaudio.com/axe-fx-ii/38498-afxii-jcm800-model.html User comments]
 +
# Use the Saturation parameter to emulate the famous "Jose Arredondo mod" on the JCM800. Cliff: "The saturation switch switches in a zener diode clipping stage right before the tone stack. This is the "Arrendondo Mod"" [http://forum.fractalaudio.com/axe-fx-ii-discussion/35997-axe-fx-ii-technical-questions-thread-76.html#post494304 Source]
  
 
==Brit 800 Mod==
 
==Brit 800 Mod==
Line 222: Line 224:
 
# Original controls: see above
 
# Original controls: see above
 
# Bright default: Off
 
# Bright default: Off
−
# Cliff: "The saturation switch switches in a zener diode clipping stage right before the tone stack. This is the "Arrendondo Mod"." [http://forum.fractalaudio.com/axe-fx-ii-discussion/35997-axe-fx-ii-technical-questions-thread-76.html#post494304 Source]
 
 
# Cliff: "The JCM800 MOD is not a Jose Arrendodo modded Marshall model. If the manual says that, then it's a mistake. The JCM800 MOD is a JCM800 with a handful of popular modifications." [http://forum.fractalaudio.com/axe-fx-ii-bugs/39964-jcm800-mod-shouldnt-saturation.html#post541064 Source]
 
# Cliff: "The JCM800 MOD is not a Jose Arrendodo modded Marshall model. If the manual says that, then it's a mistake. The JCM800 MOD is a JCM800 with a handful of popular modifications." [http://forum.fractalaudio.com/axe-fx-ii-bugs/39964-jcm800-mod-shouldnt-saturation.html#post541064 Source]
  
Line 252: Line 253:
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
−
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings.
+
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings
  
 
==USA Clean 2==
 
==USA Clean 2==
Line 281: Line 282:
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
 
# Turn up Drive, keep Master Volume low (3.50)
 
# Turn up Drive, keep Master Volume low (3.50)
−
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings.
+
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings
  
 
==USA IIC+ Norm / Bright==
 
==USA IIC+ Norm / Bright==
Line 296: Line 297:
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia1] [http://en.wikipedia.org/wiki/Mesa_Boogie_Mark_Series Wikipedia2]
−
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings.
+
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings
  
 
==USA Lead 1 / Lead 2==
 
==USA Lead 1 / Lead 2==
Line 313: Line 314:
 
# Treble Shift: this shifts the range of the Presence control to higher frequencies, it influences the treble control. In Lead 1 Treble Shift is off, which works well for recording. In Lead 2 Treble Shift is switched on, which works well within a band context, but can generate squealing and noise at high volume or gain levels
 
# Treble Shift: this shifts the range of the Presence control to higher frequencies, it influences the treble control. In Lead 1 Treble Shift is off, which works well for recording. In Lead 2 Treble Shift is switched on, which works well within a band context, but can generate squealing and noise at high volume or gain levels
 
# Turn up Drive, keep Master Volume low (3.50). Don't use Bright on higher volume levels
 
# Turn up Drive, keep Master Volume low (3.50). Don't use Bright on higher volume levels
−
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings.
+
# The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the [[Mother-of-all-pedal-and-effects-emulations thread]] for the EQ settings
  
 
==Recto Orange / Red==
 
==Recto Orange / Red==
Line 330: Line 331:
 
# Keep Master volume low (3.50), use Drive to add gain
 
# Keep Master volume low (3.50), use Drive to add gain
 
# Cliff talking about the G1 Recto sims: "None of the Recto models in the Axe-Fx have the post tone-stack bass boost. If you want to replicate the behavior of a Single Rectifier you need to put an 11 dB bass boost after the preamp model. The Axe-Fx models are based on the Dual Rectifier modes with the bass boost switch off. Single Rectifiers engage the bass boost switch automatically in channel 2" (use a PEQ or low shelf Filter after the Amp block to boost bass by 11 dB at around 120Hz)
 
# Cliff talking about the G1 Recto sims: "None of the Recto models in the Axe-Fx have the post tone-stack bass boost. If you want to replicate the behavior of a Single Rectifier you need to put an 11 dB bass boost after the preamp model. The Axe-Fx models are based on the Dual Rectifier modes with the bass boost switch off. Single Rectifiers engage the bass boost switch automatically in channel 2" (use a PEQ or low shelf Filter after the Amp block to boost bass by 11 dB at around 120Hz)
−
# Damping on the Recto Red defaults to zero. The Presence control on the real amp is not a regular Presence control. This is why there's no virtual Presence control for this amp on the Axe-Fx II. [http://forum.fractalaudio.com/reviews/37857-axe-fx-2-amps-sims-review-4.html#post517841 Source]
+
# Damping on the Recto Red defaults to zero. The Presence control on the real amp is not a regular Presence control. This is why there's no virtual Presence control for this amp on the Axe-Fx II [http://forum.fractalaudio.com/reviews/37857-axe-fx-2-amps-sims-review-4.html#post517841 Source]
  
 
==Recto New Orange / New Red==
 
==Recto New Orange / New Red==
Line 345: Line 346:
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://www.mesaboogie.com Mesa website]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia]
 
# [http://en.wikipedia.org/wiki/Mesa_Boogie Wikipedia]
−
# Keep Master volume low (3.50), use Drive to add gain
 
 
# See notes above
 
# See notes above
  
Line 354: Line 354:
 
''Based on: Bogner Ecstasy, the 20th Anniversary model. BLUE: OD channel w/ BOOST + STRUCTURE OFF. Red: same but with OD channel w/ BOOST + STRUCTURE ON''
 
''Based on: Bogner Ecstasy, the 20th Anniversary model. BLUE: OD channel w/ BOOST + STRUCTURE OFF. Red: same but with OD channel w/ BOOST + STRUCTURE ON''
 
# Details:
 
# Details:
−
# Speakers: 4x12" Celestion V30  
+
# Original speaker(s): 4x12" Celestion V30  
−
# Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German
+
# Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German V30, 4x12 German
 
# Original controls: Gain, Master, Bass, Middle, Treble, Presence, Bright switch
 
# Original controls: Gain, Master, Bass, Middle, Treble, Presence, Bright switch
−
# Bright default: ...
+
# Bright default: Off
 
# [http://www.bogneramplification.com/customshop/EcstasyManual.php Original manual]
 
# [http://www.bogneramplification.com/customshop/EcstasyManual.php Original manual]
 
# [http://www.bogneramplification.com/customshop/Ecstasy20thAInfo.php Bogner website]
 
# [http://www.bogneramplification.com/customshop/Ecstasy20thAInfo.php Bogner website]
 
# [http://en.wikipedia.org/wiki/Bogner Wikipedia]
 
# [http://en.wikipedia.org/wiki/Bogner Wikipedia]
−
# Blue: the model is very low gain and dark. Try with Boost and Bright (or turn up Presence)
 
−
# Red: the model is very dark. Try Bright (or turn up Presence)
 
 
# Quote Cliff: "My actual XTC has a Log10 pot for the treble which is an odd choice. Treble pots are usually linear and the Axe-Fx model uses a linear pot. The problem with a log-taper pot is that the Treble does almost nothing for the first 50%. So you can't use your eyes if you want to copy the tone. This is the case with several of the amp models. In these cases the taper used on the real amp is what I would call "a less than optimum" choice. I think in many cases the designer simply doesn't realize the affect the taper has on the locus. So, if I deemed the choice of taper to be "incorrect" the model uses the correct taper. The Bogner models fall into this category. The choice of a Log10 pot for the Treble pot doesn't make sense so the model uses a linear taper which gives a smooth locus"
 
# Quote Cliff: "My actual XTC has a Log10 pot for the treble which is an odd choice. Treble pots are usually linear and the Axe-Fx model uses a linear pot. The problem with a log-taper pot is that the Treble does almost nothing for the first 50%. So you can't use your eyes if you want to copy the tone. This is the case with several of the amp models. In these cases the taper used on the real amp is what I would call "a less than optimum" choice. I think in many cases the designer simply doesn't realize the affect the taper has on the locus. So, if I deemed the choice of taper to be "incorrect" the model uses the correct taper. The Bogner models fall into this category. The choice of a Log10 pot for the Treble pot doesn't make sense so the model uses a linear taper which gives a smooth locus"
  
Line 371: Line 369:
 
''Based on: Bogner Shiva Clean, the 90W anniversary model. Clean: powerful shimmering cleans. Lead: a sweet, rich-sounding amp with aggressive, English- style midrange punch''
 
''Based on: Bogner Shiva Clean, the 90W anniversary model. Clean: powerful shimmering cleans. Lead: a sweet, rich-sounding amp with aggressive, English- style midrange punch''
 
# Details: 20th Anniversary model, KT88 tubes, 90W
 
# Details: 20th Anniversary model, KT88 tubes, 90W
−
# Speakers: 2x12" Celestion V30
+
# Original speaker(s): 2x12" Celestion V30
 
# Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German
 
# Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German
 
# Original controls for clean channel: Bass, Treble, Volume, Master, Presence, Bright switch (less to none effective the higher Drive is set)
 
# Original controls for clean channel: Bass, Treble, Volume, Master, Presence, Bright switch (less to none effective the higher Drive is set)
 
# Original controls for lead  channel: Bass, Middle, Treble, Volume, Master, Presence, Bright switch (less effective the higher Drive is set but still noticeable)
 
# Original controls for lead  channel: Bass, Middle, Treble, Volume, Master, Presence, Bright switch (less effective the higher Drive is set but still noticeable)
 
# Boost, Mode and Shift controls on the original amp are not modeled
 
# Boost, Mode and Shift controls on the original amp are not modeled
−
# Bright default: ...
+
# Bright default: Off
 
# [http://www.bogneramplification.com/customshop/ShivaManual.php Original manual]
 
# [http://www.bogneramplification.com/customshop/ShivaManual.php Original manual]
 
# [http://www.bogneramplification.com/customshop/ShivaInfo.php Bogner website]
 
# [http://www.bogneramplification.com/customshop/ShivaInfo.php Bogner website]
Line 387: Line 385:
 
''Based on: Bogner Uberschall, the "High Gain" channel of this 120W head. Heavy grinding lows and insane gain''
 
''Based on: Bogner Uberschall, the "High Gain" channel of this 120W head. Heavy grinding lows and insane gain''
 
# Details: EL34
 
# Details: EL34
−
# Speakers: 4x12" Celestion V30 and G12T75
+
# Original speaker(s): 4x12" Celestion V30 and G12T75
 
# Stock cabinet suggestion: 4x12 Uber T75+V30 (RW)
 
# Stock cabinet suggestion: 4x12 Uber T75+V30 (RW)
 
# Original controls: Gain, Master, Bass, Middle, Treble, Presence
 
# Original controls: Gain, Master, Bass, Middle, Treble, Presence
−
# Bright default: ...
+
# Bright default: On
 
# [http://www.bogneramplification.com/customshop/UberschallInfo.php Original manual]
 
# [http://www.bogneramplification.com/customshop/UberschallInfo.php Original manual]
 
# [http://www.bogneramplification.com Bogner website]
 
# [http://www.bogneramplification.com Bogner website]

Revision as of 10:14, 12 August 2011

Below is a list of the amp types in the Axe-Fx II and amps they are based on.

  • Amp icons provided by forum member SynFactory. Source
  • H75 speaker is similar to a G12H30. M75 speaker is similar to a greenback.


59 Bassguy

150px

Based on: 1959 Fender Bassman, a low-to-medium gain amp designed for bass but more widely adopted by guitarists

  1. Details: 5F6A circuit, tweed era, normal and bright channel
  2. Original speaker(s): 4x10 Jensen or Eminence
  3. Stock cabinet suggestion: 4x10
  4. Original controls: Volume, Presence, Bass, Middle, Treble, no Master
  5. Bright default: On
  6. For authentic tone: crank the Master, use Drive for volume and gain
  7. Try with a Treble Booster Drive block befor the amp
  8. Despite the fact that it was originally designed for bass guitars, it was more famous for its use with electric guitars
  9. Fender website
  10. Wikipedia

65 Bassguy

150px

Based on: 1965 Fender Bassman., the blackface version with a different circuit design

  1. Details:
  2. Original speaker(s): 4x10 Jensen or Eminence
  3. Stock cabinet suggestion: 4x10
  4. Original controls: ..., no Master
  5. Bright default: On
  6. For authentic tone: crank the Master, use Drive for volume and gain
  7. Try with a Treble Booster Drive block befor the amp
  8. Despite the fact that it was originally designed for bass guitars, it was more famous for its use with electric guitars
  9. Cliff: "Definitely not your father's Bassman. Has a pissed-off Marshall vibe to it" Source
  10. Fender website
  11. Wikipedia

Vibrato Verb

150px

Based on: Fender Vibroverb, a 40W combo that's great for clear or grinding cleans and gutsy blues

  1. Details: 6G16 circuit, Brownface era, normal and bright channel
  2. Original speaker(s): 2x10 Oxford
  3. Stock cabinet suggestion: 1x10 gold/black, 1x15 Thunderbolt, EVM 12L
  4. Original controls: Volume, Bass, Treble, no Master
  5. Bright default: On
  6. For authentic tone: the original amp has a “tapped” treble circuit, meaning that treble is “flat” at setting “5”. Cutting or boosting the treble was possible by turning the knob down (below 5) or up (above 5). Crank the Master, use Drive for volume and gain
  7. Fender website
  8. Wikipedia

Deluxe Verb

150px

Based on: Fender Deluxe Reverb, great, chimey tone with nice power amp breakup when you push the MASTER

  1. Details: AB763 circuit, 22W, blackface era
  2. Original speaker(s): 1x12 Jensen C12Q
  3. Stock cabinet suggestion: 1x12 tweed, 1x15 blue
  4. Original controls: Volume, Bass, Treble, no Master
  5. Bright default: On
  6. For authentic tone: crank the Master, use Drive for volume and gain
  7. Fender website
  8. Wikipedia

Double Verb

150px

Based on: Fender Twin Reverb, “Normal” channel. Known for amazing clean sounds and nice breakup

  1. Details: AB763 circuit, normal and vibrato channel, Blackface era, 100W
  2. Original speaker(s): 2x12 Jensen C12N / JBL D120 / Oxford 12T6 / EVM-12L
  3. Stock cabinet suggestion: EVM 12L, 2x12 black/twin, Doubleverb
  4. Original controls for normal channel: Volume, Bass, Middle, Treble, Bright switch (works with Volume below 6), no Master
  5. Bright default: Off
  6. For authentic tone: crank the Master, use Drive for volume
  7. The Fender Twin Reverb is considered a standard model for players seeking a clean sound
  8. Fender website
  9. Wikipedia

JR Blues

150px

Based on: Fender Blues Jr., a gutsy little classic with dual EL84s

  1. Details: 15W
  2. Original speaker(s): 1x12 Jensen C12N or P12R
  3. Stock cabinet suggestion: 1x12 black/blue/twin
  4. Original controls: Bass, Middle, Treble, Gain, Volume, FAT boost (not modelled)
  5. Bright default: On
  6. Fender website
  7. Wikipedia

Class-A 15W TB

150px

Based on: Vox AC-15. The heart of this amp’s tone comes from its power section and no negative feedback

  1. Details: 15W, EL84 tubes
  2. Original speaker(s): 1x12 Celestion G12M greenback
  3. Stock cabinet suggestion: greenback, Alnico Blue
  4. Original controls: ..., no Master
  5. Bright default: On
  6. For authentic tone: crank the master, set Drive to taste
  7. Vox website
  8. Wikipedia

Class-A 30W

150px

Based on: Vox AC-30, a combo that dominated the British Invasion. Gritty character, warm tone, great feel

  1. Details: 30W, EL84
  2. Original speaker(s): 2x12 Celestion G12M greenback or Alnico Blue or Silver
  3. Stock cabinet suggestion: greenbacks, Alnico Blue's
  4. Original controls: Volume, Tone, no Master
  5. Bright default: Off
  6. For authentic tone: crank the master, set Drive to taste. Leave the tone controls at noon and use HiCut/Presence to cut treble
  7. Try with a Tonebender or Treble Booster Drive block before the amp
  8. Vox website
  9. Wikipedia

Class-A 30W TB

150px

Based on: Vox AC-30 TBX (Topboost), created in response to demand for "More treble." Great highs + slightly reduced bass

  1. Details: 30W, EL84
  2. Original speaker(s): 2x12 Celestion G12M greenback or Alnico Blue or Silver
  3. Stock cabinet suggestion: greenbacks, Alnico Blue's
  4. Original controls: Volume, Cut (== Presence), Bass, Treble, no Master
  5. Bright default: On
  6. For authentic tone: turn up the Master, set Drive to taste, Mids at noon. Use HiCut/Presence to cut treble
  7. Instead of turning up Drive, try boosting the input signal before the amp, for example with a Tape Dist or FET Boost Drive block
  8. Vox website
  9. Wikipedia
  10. Wikipedia: "The "Top Boost" (or "Brilliance") feature was Vox's optional addition of a circuit that introduced an extra gain stage and tone controls for bass and treble (as opposed to the single "tone" control of early AC30s)."

Brit JM45

150px

Based on: Marshall JTM 45, made famous by Clapton and others; actually a modified Bassman design

  1. Details: 45W
  2. Original speaker(s): 4x12 Celestion greenback
  3. Stock cabinet suggestion: 4x12 greenbacks
  4. Original controls: Volume, Bass, Middle, Treble, no Master
  5. Bright default: Off
  6. For authentic tone: keep Bass low, crank the Master, use Drive for volume and gain
  7. Try with a Tonebender or Treble Booster Drive block before the amp
  8. Marshall website
  9. Wikipedia

Plexi Normal / Treble

150px

Based on: Marshall Super Lead 1959, the classic amp head that gave rise to “the stack.” Great for crunchy rhythm work. Normal: normal channel. Treble: based on the “High Treble” channel

  1. Details: normal and treble channel
  2. Original speaker(s): 4x12 Celestion greenbacks or G12H30
  3. Stock cabinet suggestion: 4x12 greenbacks or G12H30s
  4. Original controls: Volume, Bass, Middle, Treble, no Master, Presence
  5. Bright default: Off (Normal), On (Treble)
  6. For authentic tone: crank the Master, use Drive for volume and gain
  7. Marshall website
  8. Wikipedia
  9. Cliff: "The Plexi Normal has no treble speaker that's why it's bassy. (...) with Input 2 on a Plexi (which is the Plexi Treble model). FWIW, the Plexi Normal channel sounds identical to my reference amp which is a particularly good copy." Source
  10. Cliff (about the Plexi in the Standard/Ultra): "Cliff: "One of the first mods people make to real 'Plexi' Marshalls is to "clip the bright cap". The bright cap varied over the years, supposedly depending on what was lying around in the shop. The model defaults to the bright cap in the circuit. If you turn the bright off you're effectively clipping the bright cap. With the bright cap in Marshalls can be very bright and harsh. However, if you crank the Master you might find the extra brightness helps compensate for the power amp getting darker."
  11. Use two amps in a single preset, one set to Normal and one set to Teble, to emulate what they often with the real amp: jumping both channels
  12. To recreate the Plexi 2 sim from the Standard/Ultra, use Plexi Treble and (Source):
    • Lower damp to 4.76
    • Change bright cap value to .22
    • Xformer high = 14965
    • Hi freq res and low freq res = 5
    • Pres freq = 1200hz
    • Tone location = post
    • Sag = 2.01

1987X Normal / Treble

150px

Based on: Marshall 1987x Vintage Series, features what many consider to be an “essential” mod to the tonestack of this Plexi. Normal: normal channel. Treble: the treble channel

  1. Details: 50w reissue of the 60's Marshall 1959SLP. Part of the Vintage Series.
  2. Original speaker(s): 4x12 Celestion greenback or G12H30
  3. Stock cabinet suggestion: 4x12 greenbacks or G12H30s
  4. Original controls: Bass, Middle, Treble, Volume, Presence, no Master
  5. Bright default: Off
  6. For authentic tone: crank the Master, use Drive for volume and gain
  7. Original manual
  8. Marshall website
  9. Wikipedia
  10. Cliff: "The 1987X MOD model is based on a 1987X Plexi Reissue with C5 removed (which is the most common mod done to this amp)"
  11. Use two amps in a single preset, one set to Normal and one set to Teble, to emulate what they often with the real amp: jumping both channels

Brit 800

150px

Based on: Marshall JCM800, the vaunted model 2204. Bring the Master up for true 80s tone

  1. Details:
  2. Original speaker(s): 4x12 Celestion greenbacks, V30s, T75s
  3. Stock cabinet suggestion: 4x12 with greenbacks, V30s or T75s
  4. Original controls: Gain, Bass, Middle, Treble, Presence, Volume
  5. Bright default: On
  6. Turn up the Master to make it less bright, or switch off Bright
  7. Marshall website
  8. Wikipedia
  9. Try with a TS808 or Tube Drive block, set the Drive block to zero Drive and full Level
  10. Cliff: "It is a very bright model. However, it sounds exactly like the amp it was based on. If it is too bright, you can adjust the various tone controls and parameters to reduce the brightness to your tastes. They are designed to be run loud and the brightness decreases as the MV is increased. The sound of 80's hair metal for sure." Source
  11. User comments
  12. Use the Saturation parameter to emulate the famous "Jose Arredondo mod" on the JCM800. Cliff: "The saturation switch switches in a zener diode clipping stage right before the tone stack. This is the "Arrendondo Mod"" Source

Brit 800 Mod

150px

Based on: Marshall JCM800, with a handful of popular modifications

  1. Details: the manual (1.02) states: "with THE mod, designed by Jose Arredondo". This is an error, the parameter Saturation has to be enabled for the Jose mod.
  2. Original speaker(s): see above
  3. Stock cabinet suggestion: see above
  4. Original controls: see above
  5. Bright default: Off
  6. Cliff: "The JCM800 MOD is not a Jose Arrendodo modded Marshall model. If the manual says that, then it's a mistake. The JCM800 MOD is a JCM800 with a handful of popular modifications." Source

HiPower Normal / Brilliant

150px

Based on: Hiwatt DR103, medium-gain, full sound amp with an unique tone-stack and a chimey, grinding tone. Normal: normal channel. BRILLNT: a brighter model based on the amp’s "Brilliant" channel

  1. Details: 100W
  2. Original speaker(s): Fane
  3. Stock cabinet suggestion: 4x12 Hi-Power (RW)
  4. Original controls: Volume, Master, Bass, Middle, Treble, Presence
  5. Bright default: Off
  6. Hiwatt website
  7. Wikipedia
  8. Cliff: "I have a 1974 Hiwatt DR-103. The model is based on that. It is one of the Harry Joyce, Hylight era models. Still has the original tubes. Closet find and sounds glorious"

USA Clean 1

150px

Based on: Mesa Boogie MKIV (Rhythm 1). A somewhat neutral, clean-sounding model that can pushed into warm clipping

  1. Details:
  2. Original speaker(s): 4x12 Celestion V30
  3. Stock cabinet suggestion: 4x12 Recto V30 (RW), 4x12 Recto V30 (OH), 4x12 Cali
  4. Original controls: Gain, Volume, Treble, Mid, Bass, Presence, Bright switch. Graphic Equalizer not modeled
  5. Bright default: Off
  6. Original manual
  7. Mesa website
  8. Wikipedia1 Wikipedia2
  9. The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the Mother-of-all-pedal-and-effects-emulations thread for the EQ settings

USA Clean 2

150px

Based on: Mesa Boogie Triaxis (Green), “Vintage Fat Rhythm (Mark I, Blackface)” channel

  1. Details:
  2. Original speaker(s): n/a
  3. Stock cabinet suggestion: n/a
  4. Original controls: Gain, Volume, Treble, Mid, Bass, Presence, Bright switch. Graphic Equalizer not modeled
  5. Bright default: On
  6. Mesa website
  7. Wikipedia1 Wikipedia2

USA Rhy 1

150px

Based on: Mesa Boogie MKIV (Rhythm 2), THE California crunch rhythm sound. Rhythm Ch. 2 with “Fat” switch OFF

  1. Details:
  2. Original speaker(s): 4x12 Celestion V30
  3. Stock cabinet suggestion: 4x12 Recto V30 (RW), 4x12 Recto V30 (OH), 4x12 Cali
  4. Original controls: Gain, Volume, Treble, Mid, Bass, Presence. Graphic Equalizer not modeled
  5. Bright default: On
  6. Original manual
  7. Mesa website
  8. Wikipedia1 Wikipedia2
  9. Turn up Drive, keep Master Volume low (3.50)
  10. The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the Mother-of-all-pedal-and-effects-emulations thread for the EQ settings

USA IIC+ Norm / Bright

150px

Based on: Mesa Boogie Mark II Lead, a US-made amp famous for its smooth overdrive sound with pull bright OFF / ON

  1. Details:
  2. Original speaker(s): EVM 12L
  3. Stock cabinet suggestion: EVM 12L
  4. Original controls: Volume, Master, Bass, Mid, Treble, Presence, Bright switch pullout. Treble Shift and Gain Boost not modeled
  5. Bright default: Off
  6. Original manual
  7. Mesa website
  8. Wikipedia1 Wikipedia2
  9. The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the Mother-of-all-pedal-and-effects-emulations thread for the EQ settings

USA Lead 1 / Lead 2

150px

Based on: Mesa Boogie Mark IV. Lead 1: this model has a tight, focused, hi-gain sound. Great for fusion and rock leads. Lead 2: Treble Shift gives this amp a slightly different character with a little more cut

  1. Details:
  2. Original speaker(s): 4x12 Celestion V30
  3. Stock cabinet suggestion: 4x12 Recto V30 (RW), 4x12 Recto V30 (OH), 4x12 Cali
  4. Original controls: Gain, Master, Bass, Middle, Treble, Presence, Bright switch. Graphic Equalizer not modeled
  5. Bright default: Off (Lead 1), On (Lead 2)
  6. Original manual
  7. Mesa website
  8. Wikipedia1 Wikipedia2
  9. Treble Shift: this shifts the range of the Presence control to higher frequencies, it influences the treble control. In Lead 1 Treble Shift is off, which works well for recording. In Lead 2 Treble Shift is switched on, which works well within a band context, but can generate squealing and noise at high volume or gain levels
  10. Turn up Drive, keep Master Volume low (3.50). Don't use Bright on higher volume levels
  11. The graphic EQ on the real amp is positioned between the preamp and the power amp section. As such it can't be simulated exactly. See the Mother-of-all-pedal-and-effects-emulations thread for the EQ settings

Recto Orange / Red

150px

Based on: vintage version of Mesa Boogie's Dual Rectifier (2 channels.), a high-gain masterpiece with crushing power and tighness. Orange: "Vintage" (Orange) Channel. Red: Modern (Red) "Lead" channel

  1. Details:
  2. Original speaker(s): 4x12 V30
  3. Stock cabinet suggestion: 4x12 Recto V30 (RW), 4x12 Recto V30 (OH), 4x12 Cali
  4. Original controls: Gain, Master, Bass, Middle, Treble, Presence (Presence on Orange, HiCut on Red)
  5. Bright default: On
  6. Original manual
  7. Mesa website
  8. Wikipedia
  9. Keep Master volume low (3.50), use Drive to add gain
  10. Cliff talking about the G1 Recto sims: "None of the Recto models in the Axe-Fx have the post tone-stack bass boost. If you want to replicate the behavior of a Single Rectifier you need to put an 11 dB bass boost after the preamp model. The Axe-Fx models are based on the Dual Rectifier modes with the bass boost switch off. Single Rectifiers engage the bass boost switch automatically in channel 2" (use a PEQ or low shelf Filter after the Amp block to boost bass by 11 dB at around 120Hz)
  11. Damping on the Recto Red defaults to zero. The Presence control on the real amp is not a regular Presence control. This is why there's no virtual Presence control for this amp on the Axe-Fx II Source

Recto New Orange / New Red

150px

Based on: modern version of Mesa Boogie's Dual Rectifier (3 channels), circuit changes made this version more aggressive. Orange: based on the orange channel. Red: Red Channel version of the Dual Rectifier amp

  1. Details: 100W
  2. Original speaker(s): 4x12 V30
  3. Stock cabinet suggestion: 4x12 Recto V30 (RW), 4x12 Recto V30 (OH), 4x12 Cali
  4. Original controls: Master, Gain, Bass, Middle, Treble, Presence (Presence on Orange, HiCut on Red)
  5. Bright default: On
  6. Original manual
  7. Mesa website
  8. Wikipedia
  9. See notes above

EURO Blue / Red

150px

Based on: Bogner Ecstasy, the 20th Anniversary model. BLUE: OD channel w/ BOOST + STRUCTURE OFF. Red: same but with OD channel w/ BOOST + STRUCTURE ON

  1. Details:
  2. Original speaker(s): 4x12" Celestion V30
  3. Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German V30, 4x12 German
  4. Original controls: Gain, Master, Bass, Middle, Treble, Presence, Bright switch
  5. Bright default: Off
  6. Original manual
  7. Bogner website
  8. Wikipedia
  9. Quote Cliff: "My actual XTC has a Log10 pot for the treble which is an odd choice. Treble pots are usually linear and the Axe-Fx model uses a linear pot. The problem with a log-taper pot is that the Treble does almost nothing for the first 50%. So you can't use your eyes if you want to copy the tone. This is the case with several of the amp models. In these cases the taper used on the real amp is what I would call "a less than optimum" choice. I think in many cases the designer simply doesn't realize the affect the taper has on the locus. So, if I deemed the choice of taper to be "incorrect" the model uses the correct taper. The Bogner models fall into this category. The choice of a Log10 pot for the Treble pot doesn't make sense so the model uses a linear taper which gives a smooth locus"

Shiver Clean / Lead

150px

Based on: Bogner Shiva Clean, the 90W anniversary model. Clean: powerful shimmering cleans. Lead: a sweet, rich-sounding amp with aggressive, English- style midrange punch

  1. Details: 20th Anniversary model, KT88 tubes, 90W
  2. Original speaker(s): 2x12" Celestion V30
  3. Stock cabinet suggestion: 4x12 German Boutique (RW), 4x12 German
  4. Original controls for clean channel: Bass, Treble, Volume, Master, Presence, Bright switch (less to none effective the higher Drive is set)
  5. Original controls for lead channel: Bass, Middle, Treble, Volume, Master, Presence, Bright switch (less effective the higher Drive is set but still noticeable)
  6. Boost, Mode and Shift controls on the original amp are not modeled
  7. Bright default: Off
  8. Original manual
  9. Bogner website
  10. Wikipedia

Euro Uber

150px

Based on: Bogner Uberschall, the "High Gain" channel of this 120W head. Heavy grinding lows and insane gain

  1. Details: EL34
  2. Original speaker(s): 4x12" Celestion V30 and G12T75
  3. Stock cabinet suggestion: 4x12 Uber T75+V30 (RW)
  4. Original controls: Gain, Master, Bass, Middle, Treble, Presence
  5. Bright default: On
  6. Original manual
  7. Bogner website
  8. Wikipedia
  9. Bogner: "One of the most unique items is our "Presence" control. It's an amazing combination of a midrange-presence control. As you sweep through its range you will notice an incredible variety of tones this one control allows. For an extremely aggressive sub-harmonic bass and scooped-midrange sound, keep the presence off or very low. A huge 3-dimensional tone can be found by running the presence around 2 o'clock. Pushing the "Presence" control to maximum will allow you to cut a sonic path through the mix by reinforcing your midrange and slightly rolling off the sub-bass. Trust us: REALLY check out the presence control to unleash the hidden secrets of the UBERSCHALL. The "Midrange" control is very interactive with all the other tone controls, you can go from a hollow scooped-mid setting to an aggressive in your face and on your throat kind of intensity. The "Bass" control allows almost a sub-harmonic low-end to be added, at high volumes be sure to keep the bass down a bit to keep your tone focused like a laser beam"

Solo 99 Clean

150px

Based on: the clean channel of a Soldano/Caswell midi-motorized Soldano X99 preamp,

  1. Details:
  2. Speakers: n/a
  3. Stock cabinet suggestion: n/a
  4. Original controls: ...
  5. Bright default: ...
  6. Soldano website
  7. Wikipedia

Solo 100 Rhy / Lead

150px

Based on: Soldano SLO-100, noted for its hot-rod chrome chassis and aggressive rhythm tone. RHY: Normal channel. LD: based on the snarling lead channel

  1. Details: 100W
  2. Speakers: 4x12 with Eminence speakers (RW)
  3. Stock cabinet suggestion: 4x12 Solo V12 or S12X (RW), EVM-12L
  4. Original controls: Gain, Bass, Middle, Treble, Master, Presence. Bright switch only on normal channel
  5. Bright default: ...
  6. For authentic tone: keep the Master volume low (3 -4). It's a very bright amp, keep Presence and Treble low
  7. Soldano website
  8. Wikipedia
  9. Cliff: "The SLO100 is the loudest amp I've ever used. It feels like there's a small nuclear explosion going off inside when ever you hit a power chord. It's a wicked amp but not something I would recommend for anything but large gigs. If you like the SLO 100 model you might want to try the Recto models too. It's not widely known but the Rectifier preamp is a derivative of the SLO100. Some minor changes but the basic topology is identical"
  10. Emulating Warren Hayes' tone

Friedman BE / HBE

150px

Based on: Friedman amp by Dave Friedman of Rack Systems. BE: Brown Eye, what many call “the ultimate modded Plexi”. HBE : Hairy Brown Eye, the BE amp’s alternate voicing with a gain boost. A killer hi-gain tone in your arsenal

  1. Details: EL34, one channel with two voicings, 50 or 100W, used to be called "Marsha"
  2. Speakers:
  3. Stock cabinet suggestion: a 4x12 with greenbacks, V30s or T75s
  4. Original controls: Gain, Master, Bass, Middle, Treble, Presence
  5. Bright default: ...
  6. Website

PVH 6160

150px

Based on: Peavey EVH 5150, the high-input lead channel of an amp named after the criminally insane

  1. Details: block letter model, hi input, 6L6, 120W
  2. Speakers: 4x12" Sheffield 1200 speakers
  3. Stock cabinet suggestion: 4x12 PVH 6160 (RW) or greenbacks
  4. Original controls: pre- and post-Gain, Volume, Bass, Mid, Treble, Presence, Resonance, Bright switch (rhythm channel only)
  5. Bright default: ...
  6. Original manual
  7. Peavey website
  8. Wikipedia
  9. Cilff: "I have a block letter 5150 that I based the model on." Source
  10. Cliff: "The hi-input on the Lead channel is modelled. It has lots of gain. Even at noon it's already very saturated"

MR Z 38 Sr

150px

Based on: Dr.Z Maz 38 SR, an amp popular with country and roots players

  1. Details: EL84 tubes, 38W
  2. Speakers: combination of an Alnico Blue speaker with a G12H30, or a V30 with a G12H30.
  3. Stock cabinet suggestion: see above
  4. Original controls: Volume, Master, Bass, Middle, Treble, Cut (turn up for chime)
  5. Bright default: ...
  6. Original manual
  7. Dr.Z website
  8. Wikipedia
  9. Cliff: "It's a low output amp. Turn up the Master"
  10. Amp settings database

CA3+ Rhy / Lead

150px

Based on: CAE 3+ SE, a preamp designed by the great Bob Bradshaw. RHY: channel 2 (Rhythm). LD: channel 3 (Lead)

  1. Details:
  2. Speakers: n/a
  3. Stock cabinet suggestion: n/a
  4. Original controls: Gain, Volume, Bass, Middle, Treble, post EQ (punch, presence), Bright switch for each channel
  5. Bright default: ...
  6. Original manual
  7. CAE website
  8. Cliff: "Channel 1 isn't modeled because it's very similar to a Fender Twin (Double Verb model)"

Wrecker 1

150px Based on: Trainwreck Express, designed and built by the late, great Ken Fischer

  1. Details:
  2. Speakers:
  3. Stock cabinet suggestion: 4x12 with greenbacks or G12H30s
  4. Original controls: Volume, Bas, Mid, Treble, Presence, Bright switch. No Master volume
  5. Bright default: ...
  6. For authentic tone: crank the Master volume, use Drive for volume and gain
  7. FAQ
  8. Trainwreck website
  9. Cliff: "The Trainwreck depends on power amp distortion. The OT has a high impedance which causes the power tubes to enter clipping early. I would not recommend using that model as preamp."

Corncob M50

150px

Based on: Cornford MK50II, a boutique British amp. Plexi-Meets-Modern tone with big cojones

  1. Details: 50w, 6L6/5881, 1 channel
  2. Speakers: 4x12 with V30s
  3. Stock cabinet suggestion: ...
  4. Original controls: Volume, Gain, Bass, Middle (500Hz), Treble, Volume, Presence, Resonance
  5. Bright default: ...
  6. Original manual
  7. Cornford website

Carolann Od-2

150px

Based on: the celebrated Carol-Ann OD-2r. Model fine-tuned by the highly respected Alan Phillips himself!

  1. Details: overdrive channel, 50W, EL34 or 6L6
  2. Speakers: EVM-12L or Celestion Classic Lead 80
  3. Stock cabinet suggestion: EVM-12L, greenbacks
  4. Original controls: Master, Gain, Bass, Middle, Treble, Presence, Bright switch (clean and overdrive channel), Shift switch
  5. Bright default: ...
  6. Original manual
  7. Carol-Ann website
  8. Alan Phillips: "In the real world the OD2 is very very fussy on speaker choice too. The real world speakers of choice are EVM12L in a 1x12 rear ported and 2x12 with Celestion Classic Lead 80's. I found the 12L emulation did a pretty good job. Some of the others sounded so artificial with that model. Like a rockman. Coupled with the right cab the emulated model does a good job of representing the basic tonal signature of the amp". And: "It's not a competitive model, it's a live demo of an OD2 as tweaked by me. Damn sight better than sound clips for auditioning to guys that haven't got the ability to get to a Dealer. Clearly it doesn't give you the full experience of the full amp, but is a good tonal taster. I repaired a Soldano SLO for him one day and when he came over my house to pick it up we just decided it would be a good idea to put a CA model in there. Having the actual builder involved kind of closes the loop fully. I'm happy to endorse that model because I put a lot of hours testing it and putting together a ton of technical information, fourier analysis graphs, frequency response graphs, schematics etc that would make validation of a mathematical model much easier. In reality even though the power amp and the preamp are modelled the pre-amp got the most effort. As I said in another thread, I tuned that by putting the axe in to the actual power amp of an OD2 and running that side by side with a full OD2. The final tweaks were made like that using parametric eq blocks that were hard coded in to the model. You could call that the icing on the cake and basically put the same level of tuning in to the model as I do with a actual OD2. The only difference was I was using a GUI, not resistors and capacitors."

Fryette D60 L / M

150px

Based on: Fryette Amplification D60 in the "Less" resp. "More" mode

  1. Details: 60W, KT88 or 6550
  2. Speakers: 2x12"or 4x12" Eminence P50E
  3. Stock cabinet suggestion: ?
  4. Original controls: Gain, Volume, Bass, Middle, Treble, Presence, Depth, More/less switch
  5. Bright default: ...
  6. Original manual
  7. Fryette website
  8. Wikipedia

Brown

150px

A faithful recreation of the pure, raw "Brown Sound"—The Modded “#1” Marshall

  1. Details:
  2. Speakers: 4x12 with greenbacks
  3. Stock cabinet suggestion: ...
  4. Original controls: Volume, Bass, Middle, Treble. Bright cap
  5. Bright default: ...
  6. For authentic tone: ...
  7. Marshall website
  8. Wikipedia

Citrus RV50

150px

Based on: the "dirty" channel of the 50W Orange Rockerverb head, known for warmth and rich harmonics

  1. Details: EL34
  2. Speakers: Celestion V30
  3. Stock cabinet suggestion: 4x12 Citrus V30 (RW)
  4. Original controls on dirty channel: Volume, Gain, Treble, Mid, Bass
  5. Bright default: ...
  6. Original manual
  7. Orange website
  8. Wikipedia

Jazz 120

150px

Based on: Roland JC-120 120, the only solid-state-based model in the collection; a quintessential clean tone

  1. Details: 120W (stereo: 2x 60W)
  2. Speakers: 2x12"
  3. Stock cabinet suggestion: 2x12 Jazz (RW)
  4. Original controls: Volume, Bass, Mid, Treble. No master volume
  5. Bright default: ...
  6. Original manual
  7. Roland website
  8. Wikipedia

Energyball

150px

Based on: ENGL Powerball, a very high-gain German model. Lots of bass. Great for aggressive, drop-tuned riff work

  1. Details: lead channel, 100W, 6L6
  2. Speakers: 4x12" Celestion V30 (or custom V60)
  3. Stock cabinet suggestion: 4x12 German V30 (RW), 4x12 Metal
  4. Original controls: Gain, Volume, Bass, Middle, Treble, Presence, Depth, Bottom, Open/Focused mode, Bright switch for low gain channels only
  5. Bright default: ...
  6. Original manual
  7. Engl website
  8. Wikipedia

ODS-100 Clean / Lead

150px

Based on: Dumble OD Special, a coveted but rare amp made famous by Robben Ford. Also played by the great Larry Carlton and many others. Clean: based on the Clean channel. Lead: the same amp, OD channel.

  1. Details:
  2. Speakers:
  3. Stock cabinet suggestion:
  4. Original controls: ...
  5. Bright default: ...
  6. [ Original manual]
  7. [ ... website]
  8. [ Wikipedia]

FAS Rhythm

150px

Created by Fractal Audio Systems. Combines the best features of the British and USA crunch models

  1. Details:
  2. Speakers: n/a
  3. Stock cabinet suggestion: ...
  4. Original controls: n/a
  5. Bright default: ...

FAS Lead 1

150px

Created by Fractal Audio Systems. Neutral high-gain lead with a tight midrange

  1. Details:
  2. Speakers: n/a
  3. Stock cabinet suggestion: ...
  4. Original controls: n/a
  5. Bright default: ...

FAS Lead 2

150px

Created by Fractal Audio Systems. Hot-rodded British lead sound with a tonestack by the one and only Bob Bradshaw

  1. Details:
  2. Speakers: n/a
  3. Stock cabinet suggestion: ...
  4. Original controls: n/a
  5. Bright default: ...

FAS Modern

150px

Created by Fractal Audio Systems. A high-gain hybrid. Equally well-suited to modern rhythm and lead work

  1. Details: n/a
  2. Speakers:
  3. Stock cabinet suggestion: ...
  4. Original controls: n/a
  5. Bright default: ...

Das Metall

150px

Based on: Diezel VH4, a high-gain, boutique amp famous for its powerful, heavy, aggressive sound

  1. Details: 4 channels, 6550 tubes (or EL34 or 6L6)
  2. Speakers: 4x12 with G12-K100s
  3. Stock cabinet suggestion:
  4. Original controls: Gain, Volume, Bass, Mid, Treble, Presence (4kHz), Deep (80Hz)
  5. Bright default: ...
  6. Original manual
  7. Diezel website
  8. Wikipedia

Brit Pre

150px

Based on: Marshall JMP-1 Preamp, a rack-mount preamplifier version of the Brit 900. Crunchy “ZZ” tone

  1. Details: MIDI
  2. Speakers: n/a
  3. Stock cabinet suggestion: n/a
  4. Original controls: Volume, Gain, Bass, Mid, Treble, Presence, Bass shift
  5. Bright default: ...
  6. Original manual
  7. Marshall website
  8. Wikipedia

Buttery

150px

Based (loosely) on: Budda Twinmaster, a late 90s specimen. Relies mostly on power amp distortion

  1. Details:
  2. Speakers: ?
  3. Stock cabinet suggestion: Greenbacks or Eminence speakers
  4. Original controls: Bass, Treble, Volume. Bright cap on the Volume control (Bright switch)
  5. Bright default: ...
  6. For authentic tone: turn up the Master volume, use Drive for volume and gain
  7. Original manual
  8. Budda website
  9. Wikipedia
  10. Cliff: "I did the Buttery model by ear. I listened to some clips of Buddas (Matchbox 20, remember them?) and tweaked the model until I thought it sounded like one. Screwed around a little with the tube bias points until it had the right balance of harmonics and called it a day

Boutique 1 / 2

Based on: Matchless Chieftain, a medium-gain amp, thick, yet crisp, with a fair amount of power amp breakup. 2: same amp with a boost for more gain and high-frequency emphasis

  1. Details:
  2. Speakers:
  3. Stock cabinet suggestion: 2x12 Boutique
  4. Original controls: Volume, Master Volume, Bass, Treble, Brilliance (Presence)
  5. Bright default: ...
  6. Original manual
  7. Wikipedia
  8. Based on a Vox circuit

Cameron Med / High

150px

Based on: Cameron CCV100, what its creator Mark Cameron calls “one pissed off amp". High: Another of the "hot-rodded tones" of the CCV

  1. Details: n/a
  2. Speakers: ?
  3. Stock cabinet suggestion: 4x12 with G12H30s
  4. Original controls: ?
  5. Bright default: ...

SV Bass

150px

Based on: Ampeg SVT, a bass head used for decades by famous bassists the world over

  1. Details: Super Vacuum Tube bass amp, 300W
  2. Speakers: 8x10
  3. Stock cabinet suggestion: 8x10
  4. Original controls: ...
  5. Bright default: ...
  6. Ampeg website

Tube Pre

A completely neutral, low-gain tube pre useful for “warming up” various sources

  1. Details: added in firmware 1.02
  2. Speakers: n/a
  3. Stock cabinet suggestion: n/a
  4. Original controls: regular
  5. Bright default: off
Retrieved from "https://wiki.fractalaudio.com/wiki/index.php?title=Amplifier_models_list&oldid=7658"