Always consult the official Owners Manuals first
Filter block
Jump to navigation
Jump to search
Contents
Manual
User contributions
Filter
- The Filter is a very versatile effect. For example, it can be used:
- As an one-band equalizer
- To boost the input of an amp block
- To boost the signal level for leads
- As a high-pass or lo-pass filter
- As an envelope filter
Filter: X/Y
- The Axe-Fx II XL adds X/Y switching capability to the PEQ block.
Filter: Tilt EQ
- The Tilt EQ is a slope filter that allows broad adjustment of the tone using just two parameters: Frequency and Gain. The Gain parameter sets the maximum gain of the filter relative to the center frequency. For example, a gain of 10 dB would set the maximum gain to 10 dB. The gain at the center frequency would be 0 dB and the minimum gain would be -10 dB, therefore a total of 20 dB of EQ would be applied.
Filter: Envelope Filter
- There's no dedicated Envelope filter effect block. You can achieve this effect by attaching a LFO or Envelope to a Filter (or Wah) block. You'll find settings and suggestions in this thread, this thread and in Axe-Change. Or try the Psychadelic Duck preset.