Always consult the official Owners Manuals first
Filter block
Jump to navigation
Jump to search
Manual
User contributions
Filter
- The Filter is a very versatile effect. For example, it can be used:
- As an one-band equalizer
- To boost the input of an amp block
- To boost the signal level for leads
- As a high-pass or lo-pass filter
- As an envelope filter.
More information
- Firmware 10 release notes: "These are first-order filters that can be used alone or in conjunction with the higher-order filter. To use them alone set the Type to None. Setting the parameters to their minimum or maximum values, respectively, removes the filters from the signal path."
- * Firmware 10.12 release notes: "Added Tilt EQ type to Filter block. The Tilt EQ is a slope filter that allows broad adjustment of the tone using just two parameters: Frequency and Gain. The Gain parameter sets the maximum gain of the filter relative to the center frequency. For example, a gain of 10 dB would set the maximum gain to 10 dB. The gain at the center frequency would be 0 dB and the minimum gain would be -10 dB, therefore a total of 20 dB of EQ would be applied."