The VP4 has been added to the wiki.

Difference between revisions of "Firmware"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 16: Line 16:
 
* [http://www.g66.eu/nl/support/fractal-audio-support Tutorial]
 
* [http://www.g66.eu/nl/support/fractal-audio-support Tutorial]
 
* Always disconnect the MFC-101 when updating the firmware on the Axe-Fx II.
 
* Always disconnect the MFC-101 when updating the firmware on the Axe-Fx II.
* If the Axe-Fx II sounds bad after an update, try reinstalling the firmware, or perform a [[Axe-Fx_II:_resetting|system reset]].
+
* If the Axe-Fx II sounds bad after an update, try reinstalling the firmware, or perform a [[Axe-Fx_II:_resetting the Axe-Fx II|system reset]].
  
 
=Firmware updates: Fractal-Bot and other software=
 
=Firmware updates: Fractal-Bot and other software=

Revision as of 12:12, 6 May 2015

Firmware.png

Firmware updates: in the owner's manual

Firmware updates: where to download updates

Firmware updates: release notes

Firmware updates: update guide

  • Firmware update guide. Including troubleshooting tips.
  • Tutorial
  • Always disconnect the MFC-101 when updating the firmware on the Axe-Fx II.
  • If the Axe-Fx II sounds bad after an update, try reinstalling the firmware, or perform a system reset.

Firmware updates: Fractal-Bot and other software

  • Fractal provides a dedicated utility for transferring updates to the Axe-Fx II and MFC-101, which can be used instead of Axe-Edit or a MIDI utility. See Fractal-Bot.
  • When using MIDI-OX (Windows) to send firmware to the Axe-Fx II, be aware that its default settings may cause a buffer overrun error. Change Low Level I/O Buffers size to 256, and number to 16, and Milliseconds between buffers to 90.

Firmware updates: Axe-Fx II XL recovery

  • Built-in backup firmware in the Axe-Fx II XL allows recovery in the event of complications during update. Read the Firmware Update Guide for more information, or contact Support.

Firmware updates: updating presets after a firmware update

  • Updated firmware may cause changes in your presets. Read the firmware release notes and verify your presets.
  • Also see Update Amp Defaults.

Firmware updates: more information

  • The firmware is coded in C and assembly. source
  • Cliff: "The Axe-Fx II can be reprogrammed at least 100,000 times." source

Firmware updates: updating the MFC-101