The VP4 has been added to the wiki.

Difference between revisions of "Megatap Delay block"

From Fractal Audio Wiki
Jump to navigation Jump to search
Line 55: Line 55:
 
==Envelope Follower==
 
==Envelope Follower==
  
The Megatap Delay has its own [[Modifiers,_Controllers_and_Control_Switches#Internal_controllers| Envelope Follower]], allowing volume swells.
+
The Multitap Delay has its own Envelope Follower, allowing volume swells.
  
The [[Owners_Manuals|Owner's Manual]] recommends these settings: Threshold -70, Attack 400, Release 15.
+
The [[Owners Manual]] recommends these settings: Threshold -70, Attack 400, Release 15.
  
 
==Diffusion==
 
==Diffusion==

Revision as of 10:06, 3 May 2023

Megatap Delay.png

Available on which products

  • Axe-Fx III: 2 blocks
  • FM3: 1 block
  • FM9: 2 blocks
  • Axe-Fx II: 1 block
  • AX8: no
  • FX8: 1 block

Channels or X/Y

  • Axe-Fx III and FM9 and FM3: 2 channels
  • Axe-Fx II: no
  • FX8: no

About the Megatap Delay

The Megatap Delay is a 4 second, 128-tap delay line (64 taps on the FM3 and FM9), with parametric control of time, amplitude, and panning. It can be used to create interesting sonic patterns/textures or to increase density before other effects.

The block has been overhauled in firmware 17.01 and later for the Axe-Fx III, providing many pre-configured types. This has been implemented on the FM9 too, but not (yet) on the FM3.

"The changes to the Megatap block have not been ported to the FM3 at this time. They may or may not be ported at some future date." [1]

Megatap Delay types

Megatap Delay types on the Axe-Fx III and FM9:

  1. Bounce
  2. Bounce Reverb
  3. Brute Force Reverb
  4. Creaky
  5. Deceptions
  6. Diffusion Swirl
  7. Gated Reverb
  8. Late Bloomer
  9. Lazer Zaps
  10. Megaverb
  11. Motion Echoes
  12. Ping-Pong Echo Verb
  13. Reverb Pre-Swell
  14. Reverse Reverb Echo
  15. Serpentine Swells
  16. Staccato Spread
  17. Tank Taps
  18. Tap Verb Grit
  19. Tap Verb Plush
  20. Take Five

Parameters

Envelope Follower

The Multitap Delay has its own Envelope Follower, allowing volume swells.

The Owners Manual recommends these settings: Threshold -70, Attack 400, Release 15.

Diffusion

Diffusion has its own LFO modulation parameters.

Time Shape

The EXP/LOG setting is the default and behaves as before allowing time shapes between exponential and logarithmic (including linear). The SIGMOID setting is a four-quadrant shape that allows time shapes between sigmoid and inverse sigmoid. The COSINE and SINE settings select sine wave shapes with the Time Alpha parameter controlling the number of periods from 1 to 8.

Reverb

In firmware 17 and later for the Axe-Fx III the number of taps has been expanded, allowing the block to create Reverb effects. The block provides some pre-configured types.

Factory presets

The Megatap Delay block is showcased in some factory presets. Search the Factory presets page for "megatap".

Spillover

In current firmware, the block supports Spillover between presets.

Tips and tricks

Blooming reverb

Put a Megatap block in front of the Reverb block. Set the type to Reverb Pre-Swell. Run the two blocks in parallel to the main signal chain. [2]

Videos

]