Difference between revisions of "Yeks How Tos G2"
Jump to navigation
Jump to search
m |
m |
||
Line 77: | Line 77: | ||
==How to replace the battery== | ==How to replace the battery== | ||
='''CREATING AND EDITING PRESETS'''= | ='''CREATING AND EDITING PRESETS'''= | ||
− | ==How to edit presets on | + | ==How to edit presets on a computer== |
− | ==How to use other users | + | ==How to use presets by other users== |
− | ==How to create a new preset== | + | ==How to create a new preset from scratch== |
==How to create your first preset== | ==How to create your first preset== | ||
− | |||
==How to make editing easier== | ==How to make editing easier== | ||
==How to copy and paste effect settings between presets== | ==How to copy and paste effect settings between presets== | ||
− | ==How to reset an effect to its default | + | ==How to reset an effect to its default state== |
==How to adjust the global effects level or the master reverb level== | ==How to adjust the global effects level or the master reverb level== | ||
==How to insert more than 12 effects in a preset== | ==How to insert more than 12 effects in a preset== | ||
− | ==How to add an effect | + | ==How to add an effect to a preset== |
− | ==How to | + | ==How to use effects in a parallel row== |
− | ==How to put | + | ==How to put effects before or after your own preamp== |
==How to create a master bypass switch== | ==How to create a master bypass switch== | ||
==How to run an effect in stereo or mono== | ==How to run an effect in stereo or mono== | ||
==How to set the correct bypass mode for an effect== | ==How to set the correct bypass mode for an effect== | ||
==How to set the volume level of an effect== | ==How to set the volume level of an effect== | ||
− | ==How to adjust the volume level | + | ==How to adjust the volume level of a preset while playing== |
==How to boost the signal for leads== | ==How to boost the signal for leads== | ||
− | ==How to avoid clipping== | + | ==How to avoid output clipping== |
− | ==How to decide where to put the | + | ==How to decide where to put the cab block== |
− | ==How to enable delay and reverb | + | ==How to enable spillover of delay trails and reverb== |
==How to enable global control of any effects block== | ==How to enable global control of any effects block== | ||
− | ==How to save and recall favorite amp settings ( | + | ==How to save and recall favorite amp settings (global amp)== |
==How to minimize gaps in the signal when switching presets== | ==How to minimize gaps in the signal when switching presets== | ||
− | ==How to print | + | ==How to print presets== |
==How to keep your presets organized== | ==How to keep your presets organized== | ||
==How to insert an external pedal in the routing== | ==How to insert an external pedal in the routing== | ||
='''EFFECTS'''= | ='''EFFECTS'''= | ||
− | ==How to know which effects | + | ==How to know which effects are available== |
==AMPS== | ==AMPS== | ||
− | ===How to know which | + | ===How to know which amps are simulated=== |
− | ===How to dial in | + | ===How to dial in amp settings=== |
===How to set the Drive and Master controls=== | ===How to set the Drive and Master controls=== | ||
===How to use the amp tone controls (tonestack)=== | ===How to use the amp tone controls (tonestack)=== | ||
− | ===How to | + | ===How to use the Bright switch=== |
− | ===How to | + | ===How to use the Boost switch=== |
===How to use the Presence control=== | ===How to use the Presence control=== | ||
− | ===How to set the advanced parameters=== | + | ===How to set the amp's advanced parameters=== |
− | ===How to split the preamp and poweramp | + | ===How to split the preamp and poweramp of an amp sim=== |
===How to get tight bass control=== | ===How to get tight bass control=== | ||
===How to use a Drive block to add or control gain=== | ===How to use a Drive block to add or control gain=== | ||
− | ===How to add | + | ===How to add a gain stage=== |
===How to prevent crossover distortion=== | ===How to prevent crossover distortion=== | ||
− | ===How to use multiple amps in a | + | ===How to use multiple amps in a preset=== |
− | ===How to solve | + | ===How to solve this issue: "My tone changes when I start editing the Amp block"=== |
− | ===How to get | + | ===How to get controlled feedback=== |
==CABINETS== | ==CABINETS== | ||
− | ===How to | + | ===How to choose between the stock cabinets=== |
− | ===How to | + | ===How to choose between the microphone sims=== |
===How to choose between a stereo or mono cabinet=== | ===How to choose between a stereo or mono cabinet=== | ||
===How to use the Air and Drive parameters=== | ===How to use the Air and Drive parameters=== | ||
− | ===How to use | + | ===How to use an external user cab (IR)=== |
===How to set the speaker resonance parameter=== | ===How to set the speaker resonance parameter=== | ||
− | |||
===How to optimize your room tone as well as the FOH tone === | ===How to optimize your room tone as well as the FOH tone === | ||
==OTHER EFFECTS== | ==OTHER EFFECTS== | ||
− | ===How to | + | ===How to use this effect: Chorus and Quad-Chorus=== |
− | ===How to | + | ===How to use this effect: Compressor=== |
− | ===How to | + | ===How to use this effect: Crossover=== |
− | ===How to | + | ===How to use this effect: Delay=== |
− | ===How to | + | ===How to use this effect: Detune=== |
− | ===How to | + | ===How to use this effect: Drive=== |
− | ===How to | + | ===How to use this effect: Effects Loop (FXL)=== |
− | ===How to | + | ===How to use this effect: Stereo Enhancer=== |
− | ===How to | + | ===How to use this effect: Feedback Send/Return=== |
− | ===How to | + | ===How to use this effect: Filter=== |
− | ===How to | + | ===How to use this effect: Flanger=== |
− | ===How to | + | ===How to use this effect: Formant=== |
− | ===How to | + | ===How to use this effect: Envelope filter=== |
− | ===How to | + | ===How to use this effect: Graphic Equalizer=== |
− | ===How to | + | ===How to use this effect: Looper=== |
− | ===How to | + | ===How to use this effect: MegaTap Delay=== |
− | ===How to | + | ===How to use this effect: Mixer=== |
− | ===How to | + | ===How to use this effect: Multi-Delay=== |
− | ===How to | + | ===How to use this effect: Multiband Compressor=== |
− | ===How to | + | ===How to use this effect: Noise Gate=== |
− | ===How to | + | ===How to use this effect: Panner=== |
− | ===How to | + | ===How to use this effect: Parametric Equalizer=== |
− | ===How to | + | ===How to use this effect: Phaser=== |
− | ===How to | + | ===How to use this effect: Pitch Shifter=== |
− | ===How to | + | ===How to use this effect: Resonator=== |
− | ===How to | + | ===How to use this effect: Reverb=== |
− | ===How to | + | ===How to use this effect: Reversed delay=== |
− | ===How to | + | ===How to use this effect: Ring Modulator=== |
− | ===How to | + | ===How to use this effect: Rotary Cabinet (Leslie)=== |
− | ===How to | + | ===How to use this effect: Seek wah=== |
− | ===How to | + | ===How to use this effect: Synth=== |
− | ===How to | + | ===How to use this effect: Tremolo=== |
− | ===How to | + | ===How to use this effect: (Uni)Vibe=== |
− | ===How to | + | ===How to use this effect: Vocoder=== |
− | ===How to | + | ===How to use this effect: Wah=== |
==SPECIAL SOUNDS AND ROUTINGS== | ==SPECIAL SOUNDS AND ROUTINGS== | ||
− | ===How to create an automated | + | ===How to create an automated dive bomb=== |
− | ===How to integrate | + | ===How to integrate a real talk box=== |
− | ===How to create the | + | ===How to create the vibrato effect=== |
− | ===How to | + | ===How to simulate a violin=== |
+ | ===How to simulate multiple violins (strings)=== | ||
===How to crossfade effects=== | ===How to crossfade effects=== | ||
===How to automate volume swells=== | ===How to automate volume swells=== | ||
− | ===How to get | + | ===How to get or handle acoustic tones=== |
− | + | ===How to create U2’s Mysterious Ways effect=== | |
− | ===How to create U2’s Mysterious Ways | ||
===How to create space(ship) and lasergun sounds=== | ===How to create space(ship) and lasergun sounds=== | ||
− | ===How to | + | ===How to simulate a flute=== |
− | ===How to | + | ===How to simualte an organ=== |
− | ===How to get the | + | ===How to get the shimmer effect=== |
− | ===How to | + | ===How to simulate an E-Bow (infinite sustain)=== |
− | ===How to simulate the sound of | + | ===How to simulate the sound of a windstorm=== |
− | ===How to | + | ===How to simulate a sitar or tampura=== |
− | ===How to create infinite reverb | + | ===How to create infinite reverb (freeze, hold reverb, chord-drone)=== |
− | ===How to | + | ===How to simulate dropped tuning=== |
− | ===How to | + | ===How to simulate sirens=== |
===How to create automatic double-tracking (ADT)=== | ===How to create automatic double-tracking (ADT)=== | ||
===How to use Buzz Feiten tuning=== | ===How to use Buzz Feiten tuning=== | ||
Line 194: | Line 192: | ||
='''PEDALS, SWITCHES, FOOT CONTROLLERS, MIDI'''= | ='''PEDALS, SWITCHES, FOOT CONTROLLERS, MIDI'''= | ||
==How to get familiar with MIDI== | ==How to get familiar with MIDI== | ||
− | ==How to configure MIDI settings and stuff== | + | ==How to configure the MIDI settings and stuff== |
− | ==How to handle problems | + | ==How to handle MIDI problems== |
==How to choose a MIDI foot controller== | ==How to choose a MIDI foot controller== | ||
− | ==How to make your MIDI foot controller work | + | ==How to make your MIDI foot controller work== |
− | ==How to | + | ==How to operate the MFC-101== |
− | ==How to power | + | ==How to power a MIDI foot controller through MIDI (phantom power)== |
− | ==How to access presets 128 and higher with | + | ==How to access presets 128 and higher with a MIDI foot controller== |
− | ==How to switch effects on and off using | + | ==How to switch effects on and off using a MIDI foot controller== |
− | ==How to activate the tuner using | + | ==How to activate the tuner using a MIDI foot controller== |
− | ==How to display the tuner on | + | ==How to display the tuner on a MIDI foot controller's display== |
==How to choose an expression pedal== | ==How to choose an expression pedal== | ||
==How to connect and configure an expression pedal or switch== | ==How to connect and configure an expression pedal or switch== | ||
− | ==How to solve a stuttering expression pedal== | + | ==How to solve a "stuttering" expression pedal== |
==How to turn an expression pedal into a wah== | ==How to turn an expression pedal into a wah== | ||
− | ==How to activate an effect automatically when moving | + | ==How to activate an effect automatically when moving an expression pedal== |
==How to use a single pedal to control different effects without switching presets (dual-function pedal) == | ==How to use a single pedal to control different effects without switching presets (dual-function pedal) == | ||
==How to use a switch for global control of any effects block== | ==How to use a switch for global control of any effects block== | ||
− | ==How to reset | + | ==How to reset a pedal when switching presets== |
==How to mute the delay using an expression pedal or switch== | ==How to mute the delay using an expression pedal or switch== | ||
− | ==How to switch between different effect settings using | + | ==How to switch between different effect settings using a single switch== |
==How to use a pedal for volume boosts== | ==How to use a pedal for volume boosts== | ||
='''RECORDINGS'''= | ='''RECORDINGS'''= | ||
='''VIDEOS'''= | ='''VIDEOS'''= | ||
='''CATEGORIZED FACTORY PRESETS'''= | ='''CATEGORIZED FACTORY PRESETS'''= |
Revision as of 21:04, 11 May 2011
At this moment this page is just a placeholder. In time this page will contain How-Tos concerning the Axe-Fx II. The content below is for editing purposes.
http://www.fractalaudio.com/products-fas-axe-fx-ii-2.html
http://www.fractalaudio.com/tmp/Axe-Fx_II_Product_Brief.pdf
http://forum.fractalaudio.com/search.php?do=finduser&userid=1&contenttype=vBForum_Post&showposts=1
http://wiki.fractalaudio.com/index.php?title=Yeks_How_Tos
http://forum.fractalaudio.com/showthread.php?t=35930
http://forum.fractalaudio.com/forumdisplay.php?f=61
http://forum.fractalaudio.com/showthread.php?t=35997
Contents
- 1 INTRODUCTION
- 2 READ THIS FIRST
- 3 GENERAL
- 3.1 How to choose between the first (Standard, Ultra) and second generation (Axe-Fx II) units
- 3.2 How to keep your knowledge up-to-date
- 3.3 How to get started quickly (for new users)
- 3.4 How to make sure it is set up correctly (gig checklist)
- 3.5 How to try the factory presets
- 3.6 How to find the right factory preset
- 3.7 How to view and hear the unit in action
- 3.8 How to mount it in a rack or rackbag
- 4 AMPLIFICATION AND I/O
- 4.1 How to switch it on and off
- 4.2 How to get sound from it (basics)
- 4.3 How to use it with FR amplification
- 4.4 How to connect it to a mixing table
- 4.5 How to integrate a (pre)amp
- 4.6 How to use it with a poweramp and speaker cabinet
- 4.7 How to use it with a guitar amplifier
- 4.8 How to set it up for mono or stereo output
- 4.9 How to get multiple output signals
- 4.10 How to use it for effects only
- 4.11 How to connect your guitar(s)
- 4.12 How to use its effects loop
- 4.13 How to set the input level
- 4.14 How to set the output level and avoid clipping
- 4.15 How to use it with headphones
- 4.16 How to make a digital connection
- 4.17 How to use it for reamping
- 4.18 How to mute the signal when tuning
- 4.19 How to adjust the overall tone and volume level
- 4.20 How to deal with noise
- 5 FIRMWARE, SYSTEM, SOFTWARE
- 6 CREATING AND EDITING PRESETS
- 6.1 How to edit presets on a computer
- 6.2 How to use presets by other users
- 6.3 How to create a new preset from scratch
- 6.4 How to create your first preset
- 6.5 How to make editing easier
- 6.6 How to copy and paste effect settings between presets
- 6.7 How to reset an effect to its default state
- 6.8 How to adjust the global effects level or the master reverb level
- 6.9 How to insert more than 12 effects in a preset
- 6.10 How to add an effect to a preset
- 6.11 How to use effects in a parallel row
- 6.12 How to put effects before or after your own preamp
- 6.13 How to create a master bypass switch
- 6.14 How to run an effect in stereo or mono
- 6.15 How to set the correct bypass mode for an effect
- 6.16 How to set the volume level of an effect
- 6.17 How to adjust the volume level of a preset while playing
- 6.18 How to boost the signal for leads
- 6.19 How to avoid output clipping
- 6.20 How to decide where to put the cab block
- 6.21 How to enable spillover of delay trails and reverb
- 6.22 How to enable global control of any effects block
- 6.23 How to save and recall favorite amp settings (global amp)
- 6.24 How to minimize gaps in the signal when switching presets
- 6.25 How to print presets
- 6.26 How to keep your presets organized
- 6.27 How to insert an external pedal in the routing
- 7 EFFECTS
- 7.1 How to know which effects are available
- 7.2 AMPS
- 7.2.1 How to know which amps are simulated
- 7.2.2 How to dial in amp settings
- 7.2.3 How to set the Drive and Master controls
- 7.2.4 How to use the amp tone controls (tonestack)
- 7.2.5 How to use the Bright switch
- 7.2.6 How to use the Boost switch
- 7.2.7 How to use the Presence control
- 7.2.8 How to set the amp's advanced parameters
- 7.2.9 How to split the preamp and poweramp of an amp sim
- 7.2.10 How to get tight bass control
- 7.2.11 How to use a Drive block to add or control gain
- 7.2.12 How to add a gain stage
- 7.2.13 How to prevent crossover distortion
- 7.2.14 How to use multiple amps in a preset
- 7.2.15 How to solve this issue: "My tone changes when I start editing the Amp block"
- 7.2.16 How to get controlled feedback
- 7.3 CABINETS
- 7.3.1 How to choose between the stock cabinets
- 7.3.2 How to choose between the microphone sims
- 7.3.3 How to choose between a stereo or mono cabinet
- 7.3.4 How to use the Air and Drive parameters
- 7.3.5 How to use an external user cab (IR)
- 7.3.6 How to set the speaker resonance parameter
- 7.3.7 How to optimize your room tone as well as the FOH tone
- 7.4 OTHER EFFECTS
- 7.4.1 How to use this effect: Chorus and Quad-Chorus
- 7.4.2 How to use this effect: Compressor
- 7.4.3 How to use this effect: Crossover
- 7.4.4 How to use this effect: Delay
- 7.4.5 How to use this effect: Detune
- 7.4.6 How to use this effect: Drive
- 7.4.7 How to use this effect: Effects Loop (FXL)
- 7.4.8 How to use this effect: Stereo Enhancer
- 7.4.9 How to use this effect: Feedback Send/Return
- 7.4.10 How to use this effect: Filter
- 7.4.11 How to use this effect: Flanger
- 7.4.12 How to use this effect: Formant
- 7.4.13 How to use this effect: Envelope filter
- 7.4.14 How to use this effect: Graphic Equalizer
- 7.4.15 How to use this effect: Looper
- 7.4.16 How to use this effect: MegaTap Delay
- 7.4.17 How to use this effect: Mixer
- 7.4.18 How to use this effect: Multi-Delay
- 7.4.19 How to use this effect: Multiband Compressor
- 7.4.20 How to use this effect: Noise Gate
- 7.4.21 How to use this effect: Panner
- 7.4.22 How to use this effect: Parametric Equalizer
- 7.4.23 How to use this effect: Phaser
- 7.4.24 How to use this effect: Pitch Shifter
- 7.4.25 How to use this effect: Resonator
- 7.4.26 How to use this effect: Reverb
- 7.4.27 How to use this effect: Reversed delay
- 7.4.28 How to use this effect: Ring Modulator
- 7.4.29 How to use this effect: Rotary Cabinet (Leslie)
- 7.4.30 How to use this effect: Seek wah
- 7.4.31 How to use this effect: Synth
- 7.4.32 How to use this effect: Tremolo
- 7.4.33 How to use this effect: (Uni)Vibe
- 7.4.34 How to use this effect: Vocoder
- 7.4.35 How to use this effect: Wah
- 7.5 SPECIAL SOUNDS AND ROUTINGS
- 7.5.1 How to create an automated dive bomb
- 7.5.2 How to integrate a real talk box
- 7.5.3 How to create the vibrato effect
- 7.5.4 How to simulate a violin
- 7.5.5 How to simulate multiple violins (strings)
- 7.5.6 How to crossfade effects
- 7.5.7 How to automate volume swells
- 7.5.8 How to get or handle acoustic tones
- 7.5.9 How to create U2’s Mysterious Ways effect
- 7.5.10 How to create space(ship) and lasergun sounds
- 7.5.11 How to simulate a flute
- 7.5.12 How to simualte an organ
- 7.5.13 How to get the shimmer effect
- 7.5.14 How to simulate an E-Bow (infinite sustain)
- 7.5.15 How to simulate the sound of a windstorm
- 7.5.16 How to simulate a sitar or tampura
- 7.5.17 How to create infinite reverb (freeze, hold reverb, chord-drone)
- 7.5.18 How to simulate dropped tuning
- 7.5.19 How to simulate sirens
- 7.5.20 How to create automatic double-tracking (ADT)
- 7.5.21 How to use Buzz Feiten tuning
- 7.6 INTERNAL CONTROLLERS AND MODIFIERS
- 8 PEDALS, SWITCHES, FOOT CONTROLLERS, MIDI
- 8.1 How to get familiar with MIDI
- 8.2 How to configure the MIDI settings and stuff
- 8.3 How to handle MIDI problems
- 8.4 How to choose a MIDI foot controller
- 8.5 How to make your MIDI foot controller work
- 8.6 How to operate the MFC-101
- 8.7 How to power a MIDI foot controller through MIDI (phantom power)
- 8.8 How to access presets 128 and higher with a MIDI foot controller
- 8.9 How to switch effects on and off using a MIDI foot controller
- 8.10 How to activate the tuner using a MIDI foot controller
- 8.11 How to display the tuner on a MIDI foot controller's display
- 8.12 How to choose an expression pedal
- 8.13 How to connect and configure an expression pedal or switch
- 8.14 How to solve a "stuttering" expression pedal
- 8.15 How to turn an expression pedal into a wah
- 8.16 How to activate an effect automatically when moving an expression pedal
- 8.17 How to use a single pedal to control different effects without switching presets (dual-function pedal)
- 8.18 How to use a switch for global control of any effects block
- 8.19 How to reset a pedal when switching presets
- 8.20 How to mute the delay using an expression pedal or switch
- 8.21 How to switch between different effect settings using a single switch
- 8.22 How to use a pedal for volume boosts
- 9 RECORDINGS
- 10 VIDEOS
- 11 CATEGORIZED FACTORY PRESETS